lkml.org 
[lkml]   [2013]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mmc: pxamci: Refactor regulator support
From
On Mon, Jul 22, 2013 at 1:03 PM, Mark Brown <broonie@kernel.org> wrote:
> On Sun, Jul 21, 2013 at 01:07:48AM +0200, Andrea Adami wrote:
>
>> The ADS7846 driver _requires_ the use of a voltage regulator
>> or if not present, CONFIG_REGULATOR_DUMMY should be used for proper operation.
>> This was made mandatory by the following commit:
>
> No, CONFIG_REGULATOR_DUMMY should *never* be used in production.
>
>> The ADS7846 in spitz machines is not connected to
>> any power regulator so it needs CONFIG_REGULATOR_DUMMY enabled.
>
> I don't think that's the case, it would be a very unusual piece of
> silicon that was able to operate without power. It may be that it's not
> using a software controllable regulator but there will be one or more
> power supplies. Judging by your problem here it seems like there is
> actually a software controllable regulator though...
>
>> However, enabling CONFIG_REGULATOR and CONFIG_REGULATOR_DUMMY
>> will break pxamci driver and cause the following error output:
>
> This is why you should never use CONFIG_REGULATOR_DUMMY in production,
> it's just a crutch to help things boot during development.
>
>> Regulator support in pxamci_init_ocr() is not
>> written with the existence of the dummy regulator driver in
>> mind. It does not check the return value of mmc_regulator_get_ocrmask()
>> and it will only fall back to platform data if no regulator was found.
>
> No regulator driver should be written with CONFIG_REGULATOR_DUMMY in
> mind. My guess here is that your custom callbacks for this board should
> be being replaced by a regulator, for example the fixed voltage
> regulator if there's only one voltage supported.


Thanks Mark,

patch is withdrawn.

In fact adding regulators has been self-inflicted pain...
Poodle and spitz boot normally with # CONFIG_REGULATOR is not set.

Sorry for the noise

Andrea Adami


\
 
 \ /
  Last update: 2013-07-25 23:21    [W:0.137 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site