lkml.org 
[lkml]   [2013]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver
2013/7/22 Manjunath Goudar <manjunath.goudar@linaro.org>:
> Separate the W90X900(W90P910) on-chip host controller driver from
> ehci-hcd host code so that it can be built as a separate driver module.
> This work is part of enabling multi-platform kernels on ARM;
> however, note that other changes are still needed before W90X900(W90P910)
> can be booted with a multi-platform kernel
>
> and an ehci driver that only works on one of them.
>
> With the infrastructure added by Alan Stern in patch 3e0232039
> "USB: EHCI: prepare to make ehci-hcd a library module", we can
> avoid this problem by turning a bus glue into a separate
> module, as we do here for the w90X900 bus glue.
>
> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Greg KH <greg@kroah.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: Wan ZongShun <mcuos.com@gmail.com>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
>

Manjunath,

Thanks for your patch, it is good to me.

Acked-by: Wan Zongshun <mcuos.com@gmail.com>

> V2:
> -Arranged #include's in alphabetical order.
> -Replaced "w90p910" by "w90x900" because it is supports
> all series of w90x900.
> ---
> drivers/usb/host/Kconfig | 2 +-
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-hcd.c | 5 ---
> drivers/usb/host/ehci-w90x900.c | 85 ++++++++++++++++-----------------------
> 4 files changed, 37 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index ba52912..7bc598b 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -244,7 +244,7 @@ config USB_EHCI_MV
> SoCs, see USB_EHCI_HCD_ORION for those.
>
> config USB_W90X900_EHCI
> - bool "W90X900(W90P910) EHCI support"
> + tristate "W90X900(W90P910) EHCI support"
> depends on ARCH_W90X900
> ---help---
> Enables support for the W90X900 USB controller
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 7664db8..28adb3f 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
> obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
> obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
> obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o
> +obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
>
> obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
> obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index 5717dcd..4a5644e 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
> #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
> #endif
>
> -#ifdef CONFIG_USB_W90X900_EHCI
> -#include "ehci-w90x900.c"
> -#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
> -#endif
> -
> #ifdef CONFIG_USB_OCTEON_EHCI
> #include "ehci-octeon.c"
> #define PLATFORM_DRIVER ehci_octeon_driver
> diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
> index 59e0e24..4d6631d 100644
> --- a/drivers/usb/host/ehci-w90x900.c
> +++ b/drivers/usb/host/ehci-w90x900.c
> @@ -11,13 +11,28 @@
> *
> */
>
> +#include <linux/dma-mapping.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
> +
> +#include "ehci.h"
>
> /* enable phy0 and phy1 for w90p910 */
> #define ENPHY (0x01<<8)
> #define PHY0_CTR (0xA4)
> #define PHY1_CTR (0xA8)
>
> +#define DRIVER_DESC "EHCI w90x900 driver"
> +
> +static const char hcd_name[] = "ehci-w90x900 ";
> +
> +static struct hc_driver __read_mostly ehci_w90x900_hc_driver;
> +
> static int usb_w90x900_probe(const struct hc_driver *driver,
> struct platform_device *pdev)
> {
> @@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev)
> usb_put_hcd(hcd);
> }
>
> -static const struct hc_driver ehci_w90x900_hc_driver = {
> - .description = hcd_name,
> - .product_desc = "Nuvoton w90x900 EHCI Host Controller",
> - .hcd_priv_size = sizeof(struct ehci_hcd),
> -
> - /*
> - * generic hardware linkage
> - */
> - .irq = ehci_irq,
> - .flags = HCD_USB2|HCD_MEMORY,
> -
> - /*
> - * basic lifecycle operations
> - */
> - .reset = ehci_setup,
> - .start = ehci_run,
> -
> - .stop = ehci_stop,
> - .shutdown = ehci_shutdown,
> -
> - /*
> - * managing i/o requests and associated device resources
> - */
> - .urb_enqueue = ehci_urb_enqueue,
> - .urb_dequeue = ehci_urb_dequeue,
> - .endpoint_disable = ehci_endpoint_disable,
> - .endpoint_reset = ehci_endpoint_reset,
> -
> - /*
> - * scheduling support
> - */
> - .get_frame_number = ehci_get_frame,
> -
> - /*
> - * root hub support
> - */
> - .hub_status_data = ehci_hub_status_data,
> - .hub_control = ehci_hub_control,
> -#ifdef CONFIG_PM
> - .bus_suspend = ehci_bus_suspend,
> - .bus_resume = ehci_bus_resume,
> -#endif
> - .relinquish_port = ehci_relinquish_port,
> - .port_handed_over = ehci_port_handed_over,
> -
> - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
> -};
> -
> static int ehci_w90x900_probe(struct platform_device *pdev)
> {
> if (usb_disabled())
> @@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = {
> },
> };
>
> +static int __init ehci_w90X900_init(void)
> +{
> + if (usb_disabled())
> + return -ENODEV;
> +
> + pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> +
> + ehci_init_driver(&ehci_w90x900_hc_driver, NULL);
> + return platform_driver_register(&ehci_hcd_w90x900_driver);
> +}
> +module_init(ehci_w90X900_init);
> +
> +static void __exit ehci_w90X900_cleanup(void)
> +{
> + platform_driver_unregister(&ehci_hcd_w90x900_driver);
> +}
> +module_exit(ehci_w90X900_cleanup);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
> -MODULE_DESCRIPTION("w90p910 usb ehci driver!");
> -MODULE_LICENSE("GPL");
> MODULE_ALIAS("platform:w90p910-ehci");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
>



--
Wan ZongShun.
www.mcuos.com


\
 
 \ /
  Last update: 2013-07-23 04:21    [W:1.853 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site