lkml.org 
[lkml]   [2013]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/9] wilink: add device tree support
Date
Hi,

This is a follow-up on a previous patch set that had a smaller
audience. This time, I added the lists and people who were involved
in the review of the bindings documentation, since most of my changes
in v2 are coming from discussions there.

This patch series adds device tree support to the wlcore_sdio driver,
which is used by WiLink6, WiLink7 and WiLink8.

The first patches do some clean-up to make the data needed in the
wilink device tree node smaller. The remaining patches implement the
actual device tree node parsing in wlcore_sdio.

I still need to figure out how to add the information about whether
the clocks are XTAL or not. I'll send it in a separate patche set.

The DTS file changes will be sent separately, since they need to go
via different trees.

The bindings documentation patch will also be updated and sent
separately, once the XTAL issue is solved.

Tony has acked some of the patches that touch OMAP areas. I still
need one more ack to a new patch I added (wl12xx: use frequency
instead of enumerations for pdata clocks).

Sekhar, can you please check the patches that touch the davinci board
file and ack them?

Changes in v2:

* New clean-up patch (4/9);

* Patch 6/9 (previously patch 5/5) now doesn't add the clock parsing,
since it became more complicated and I added separate patches for
that;

* 3 new patches (from 7/9 till 9/9) to handle the clock reading in the
device tree;

Please review.

--
Cheers,
Luca.

Luciano Coelho (9):
wl1251: split wl251 platform data to a separate structure
wlcore: use irq_flags in pdata instead of hiding it behind a quirk
wlcore: remove pwr_in_suspend from platform data
wl12xx: use frequency instead of enumerations for pdata clocks
wlcore: always use one-shot IRQ
wlcore: add initial device tree support to the sdio module
wlcore: sdio: add wilink clock providers
wlcore: sdio: get clocks from device tree
wlcore/wl12xx: check if we got correct clock data from DT

arch/arm/mach-davinci/board-da850-evm.c | 5 +-
arch/arm/mach-omap2/board-4430sdp.c | 6 +-
arch/arm/mach-omap2/board-omap3evm.c | 4 +-
arch/arm/mach-omap2/board-omap3pandora.c | 4 +-
arch/arm/mach-omap2/board-omap4panda.c | 4 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +-
drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++--
drivers/net/wireless/ti/wl1251/sdio.c | 12 +--
drivers/net/wireless/ti/wl1251/spi.c | 2 +-
drivers/net/wireless/ti/wl12xx/main.c | 78 +++++++++++++++--
drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 ++++++
drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 16 ++--
drivers/net/wireless/ti/wlcore/sdio.c | 112 ++++++++++++++++++++++--
drivers/net/wireless/ti/wlcore/wlcore.h | 5 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 +
include/linux/wl12xx.h | 54 ++++++------
18 files changed, 295 insertions(+), 81 deletions(-)

--
1.7.10.4



\
 
 \ /
  Last update: 2013-07-02 20:21    [W:0.198 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site