Messages in this thread Patch in this message | | | From | Sebastian Hesselbarth <> | Subject | [PATCH v6 1/7] ARM: dove: add gigabit ethernet and mvmdio device tree nodes | Date | Tue, 2 Jul 2013 13:00:18 +0200 |
| |
This patch adds orion-eth and mvmdio device tree nodes for DT enabled Dove boards. As there is only one ethernet controller on Dove, a default phy node is also added with a note to set its reg property on a per-board basis.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Changelog: v5->v6: - rebase for v3.11-rc1
Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org --- arch/arm/boot/dts/dove-cubox.dts | 7 +++++++ arch/arm/boot/dts/dove.dtsi | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 5cae2ab..955188f 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -57,6 +57,13 @@ &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { status = "okay"; }; + +ðphy { + compatible = "marvell,88e1310"; + reg = <1>; +}; &i2c0 { status = "okay"; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 2cef34f..5e394a6 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -256,5 +256,40 @@ dmacap,xor; }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device-type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; }; }; -- 1.7.2.5
| |