lkml.org 
[lkml]   [2013]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/15] ARM: OMAP: USB: Add phy binding information
Date
In order for controllers to get PHY in case of non dt boot, the phy
binding information (phy device name) should be added in the platform
data of the controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/mach-omap2/usb-musb.c | 3 +++
include/linux/usb/musb.h | 3 +++
2 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8c4de27..6aa7cbf 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;

+ if (cpu_is_omap34xx())
+ musb_plat.phy_label = "twl4030";
+
if (soc_is_am35xx()) {
oh_name = "am35x_otg_hs";
name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..596f8c8 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -104,6 +104,9 @@ struct musb_hdrc_platform_data {
/* for clk_get() */
const char *clock;

+ /* phy label */
+ const char *phy_label;
+
/* (HOST or OTG) switch VBUS on/off */
int (*set_vbus)(struct device *dev, int is_on);

--
1.7.10.4


\
 
 \ /
  Last update: 2013-07-18 09:21    [W:0.122 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site