Messages in this thread Patch in this message | | | From | Zubair Lutfullah <> | Subject | [PATCH 06/21] MFD: ti_tscadc: ADC Clock check not required | Date | Wed, 17 Jul 2013 18:26:35 +0100 |
| |
ADC is ideally expected to work at a frequency of 3MHz.
The present code had a check, which returned error if the frequency
went below the threshold value. But since AM335x supports various
working frequencies, this check is not required.
Now the code just uses the internal ADC clock divider to set the ADC
frequency w.r.t the sys clock.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> --- drivers/mfd/ti_am335x_tscadc.c | 6 +----- include/linux/mfd/ti_am335x_tscadc.h | 1 - 2 files changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index fdbd0d5..e7314e4 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -197,11 +197,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) clock_rate = clk_get_rate(clk); clk_put(clk); clk_value = clock_rate / ADC_CLK; - if (clk_value < MAX_CLK_DIV) { - dev_err(&pdev->dev, "clock input less than min clock requirement\n"); - err = -EINVAL; - goto err_disable_clk; - } + /* TSCADC_CLKDIV needs to be configured to the value minus 1 */ clk_value = clk_value - 1; tscadc_writel(tscadc, REG_CLKDIV, clk_value); diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index f436918..1516dc8 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -127,7 +127,6 @@ #define SEQ_STATUS BIT(5) #define ADC_CLK 3000000 -#define MAX_CLK_DIV 7 #define TOTAL_STEPS 16 #define TOTAL_CHANNELS 8 #define FIFO1_THRESHOLD 19 -- 1.7.9.5
| |