lkml.org 
[lkml]   [2013]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] regulator: palmas-pmic: doc: remove ti,tstep
Date
commit 28d1e8cd671a53d6b4f967abbbc2a55f7bd333f6
(regulator: palma: add ramp delay support through regulator constraints)

Removed the regulator's ti,step option from driver without updating the
documentation. remove the support from documentation and example as well.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
.../devicetree/bindings/regulator/palmas-pmic.txt | 2 --
1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 04d67f0..30b0581 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -33,7 +33,6 @@ Optional nodes:
ti,roof-floor - control voltage selection by pin(boolean)
ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
2 - eco, 3 - forced pwm
- ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
ti,smps-range - OTP has the wrong range set for the hardware so override
0 - low range, 1 - high range.

@@ -59,7 +58,6 @@ pmic {
ti,warm-reset;
ti,roof-floor;
ti,mode-sleep = <0>;
- ti,tstep = <0>;
ti,smps-range = <1>;
};

--
1.7.9.5


\
 
 \ /
  Last update: 2013-07-16 17:01    [W:0.076 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site