[lkml]   [2013]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/4] usb: musb: fix USB enumeration issue in OMAP3 platform

On Tue, Jul 16, 2013 at 11:22:38AM +0530, Kishon Vijay Abraham I wrote:
> Tony,
> On Monday 08 July 2013 04:44 PM, Kishon Vijay Abraham I wrote:
> > This series fixes the USB enumeration issue caused because of the controller
> > not able to get a reference to the PHY because of incorrect binding in the
> > board file.
> >
> > In the case of non-dt boot, the platform specific initialization file
> > (board file) will do usb_bind_phy that binds the usb controller with the
> > PHY using device names. After the device names are created using
> > PLATFORM_DEVID_AUTO, our original method of binding by device names doesn't
> > work reliably (since the device name changes). Hence the usb controller
> > is made to use labels for getting the PHY.
> >
> > Here the PHY name is added in the plat data of USB controller device which
> > should be used by the controller driver to get the PHY.
> > Two new APIs usb_get_phy_by_name and devm_usb_get_phy_by_name are added to
> > be used by the controller to get the PHY by name.
> You haven't picked this patch series?

yeah and now it's too much to send during the -rc series. Here's what we
can do, we can to minimum fix for -rc series (patching the names again)
and I'll queue everything else for mailine if tony gives me his Ack for
all arch/arm/*omap* parts.

Sounds good ?

[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2013-07-16 15:21    [W:0.064 / U:6.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site