lkml.org 
[lkml]   [2013]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH -v2 1/3] PCI: introduce PCIe Device Serial Number Capability support
On 2013/7/12 2:18, Don Dutile wrote:
> On 07/11/2013 04:09 PM, Bjorn Helgaas wrote:
>> On Thu, Jul 11, 2013 at 3:51 AM, Don Dutile<ddutile@redhat.com> wrote:
>>> On 07/11/2013 05:43 AM, Yijing Wang wrote:
>>>>
>>>> Introduce PCIe Ext Capability Device Serial Number support,
>>>> so we can use the unique device serial number to identify
>>>> the physical device. During system suspend, if the PCIe
>>>> device was removed and inserted a new same device, after
>>>> system resume there is no good way to identify it, maybe
>>>> Device Serial Number is a good choice if device support.
>>>>
>>>> Signed-off-by: Yijing Wang<wangyijing@huawei.com>
>>>> ---
>>>> drivers/pci/pci.c | 27 +++++++++++++++++++++++++++
>>>> drivers/pci/probe.c | 2 ++
>>>> include/linux/pci.h | 3 +++
>>>> 3 files changed, 32 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>> index e37fea6..2e855b5 100644
>>>> --- a/drivers/pci/pci.c
>>>> +++ b/drivers/pci/pci.c
>>>> @@ -2048,6 +2048,33 @@ void pci_free_cap_save_buffers(struct pci_dev *dev)
>>>> }
>>>>
>>>> /**
>>>> + * pci_device_serial_number - get device serial number
>>>> + * @dev: the PCI device
>>>> + *
>>>> + * return the device serial number if device support,
>>>> + * otherwise return 0.
>>>> + */
>>>> +u64 pci_device_serial_number(struct pci_dev *dev)
>>>
>>> See comment below:
>>> void pci_device_serial_number(struct pci_dev *dev)
>>>
>>>
>>>> +{
>>>> + int pos;
>>>> + u64 sn;
>>>> + u32 lo, hi;
>>>> +
>>>> + if (!pci_is_pcie(dev))
>>>> + return 0;
>>>> +
>>>
>>> See comment below:
>>> if (!pci_is_pcie(dev)) {
>>> dev->sn = 0;
>>> return;
>>>
>>> }
>>>>
>>>> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
>>>> + if (!pos)
>>>> + return 0;
>>>> +
>>>> + pci_read_config_dword(dev, pos + 4,&lo);
>>>> + pci_read_config_dword(dev, pos + 8,&hi);
>>>> + sn = ((u64)hi<< 32) | lo;
>>>
>>> See comment below:
>>> dev->sn = ((u64)hi<< 32) | lo;
>>> return;
>>>
>>>> + return sn;
>>>> +}
>>>> +EXPORT_SYMBOL(pci_device_serial_number);
>>>> +
>>>> +/**
>>>> * pci_configure_ari - enable or disable ARI forwarding
>>>> * @dev: the PCI device
>>>> *
>>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>>> index 46ada5c..c4c1a2b 100644
>>>> --- a/drivers/pci/probe.c
>>>> +++ b/drivers/pci/probe.c
>>>> @@ -1322,6 +1322,8 @@ static void pci_init_capabilities(struct pci_dev
>>>> *dev)
>>>> /* Power Management */
>>>> pci_pm_init(dev);
>>>>
>>>> + dev->sn = pci_device_serial_number(dev);
>>>> +
>>>
>>> Finally, 'the comment below':
>>> I know you were following Bjorn's suggestion, which I thought
>>> was an improvement, but why not do above assignment in
>>> pci_device_serial_number() ?
>>> See above....
>>
>> pci_device_serial_number() would then have the side-effect of saving
>> the result somewhere, and callers would have to know where to look.
> Ah, like so many other features of a PCI device? -- what are all those
> flags/status bits in pdev for ??? ;-)
>
>> Personally, I think it's simpler to return the serial number directly
>> and avoid the side-effect, but maybe this is just bike-shedding.
>>
> What struck me about rtning a value is in pci_init_capabilities(),
> it was the only function with a rtn value that had to be put into a pci_dev struct element,
> while all the others stored their related capabilities in the pdev, or other struct
> related to it.
>
> So, maybe there should be a "pci_device_serial_number_init()" function
> which does the storage in the pdev struct, and another (wrapper,
> dare I shoot myself, inline) that is "pci_device_serial_number()" that returns

add an wrapper function may be ok, as I mentioned in pre-reply, what about,

static void pci_init_capabilities(struct pci_dev *dev)
...............
pci_dsn_init(dev);
.................


void pci_dsn_init(dev)
{
dev->sn = pci_device_serial_number(dev);
}

> the value of the pdev's sn element, if another module or other core component
> want to get it. .... and do that in a future patch... :-/
>
>> As long as we are bike-shedding, I'd just drop "sn" and do:
>>
>> return ((u64)hi<< 32) | lo;
>>
>> And of course, you need spaces before "&hi" and "&lo" in the
>> pci_read_config_dword() calls.
>
>
> .
>


--
Thanks!
Yijing



\
 
 \ /
  Last update: 2013-07-12 05:21    [W:1.096 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site