lkml.org 
[lkml]   [2013]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V3 1/3] dts: change Marvell prefix to 'marvell'
From
On Wed, Jul 10, 2013 at 8:24 PM, Jason Cooper <jason@lakedaemon.net> wrote:
> On Wed, Jul 10, 2013 at 04:19:46PM +0800, Haojian Zhuang wrote:
>> On Tue, Jul 9, 2013 at 8:49 PM, Jason Cooper <jason@lakedaemon.net> wrote:
>> > Neil,
>> >
>> > On Tue, Jul 09, 2013 at 02:42:44PM +0800, Neil Zhang wrote:
>> >> The documented vendor prefix for Marvell is 'marvell', not 'mrvl', so
>> >> let's change it.
>> >>
>> >> Signed-off-by: Neil Zhang <zhangwm@marvell.com>
>> >> ---
>> >> .../devicetree/bindings/arm/mrvl/intc.txt | 16 +++---
>> >> .../devicetree/bindings/arm/mrvl/mrvl.txt | 6 +-
>> >> .../devicetree/bindings/arm/mrvl/timer.txt | 4 +-
>> >> Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 14 +++---
>> >> .../devicetree/bindings/mmc/sdhci-pxa.txt | 8 ++--
>> >> .../devicetree/bindings/rtc/sa1100-rtc.txt | 4 +-
>> >> .../devicetree/bindings/serial/mrvl-serial.txt | 2 +-
>> >> arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
>> >> arch/arm/boot/dts/mmp2.dtsi | 56 ++++++++++----------
>> >> arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
>> >> arch/arm/boot/dts/pxa168.dtsi | 24 ++++----
>> >> arch/arm/boot/dts/pxa2xx.dtsi | 16 +++---
>> >> arch/arm/boot/dts/pxa3xx.dtsi | 2 +-
>> >> arch/arm/boot/dts/pxa910-dkb.dts | 2 +-
>> >> arch/arm/boot/dts/pxa910.dtsi | 27 +++++-----
>> >> arch/arm/mach-mmp/irq.c | 16 +++---
>> >> arch/arm/mach-mmp/mmp-dt.c | 28 +++++-----
>> >> arch/arm/mach-mmp/mmp2-dt.c | 16 +++---
>> >> arch/arm/mach-mmp/time.c | 2 +-
>> >> arch/arm/mach-pxa/pxa-dt.c | 14 +++---
>> >> drivers/i2c/busses/i2c-pxa.c | 10 ++--
>> >> drivers/mmc/host/sdhci-pxav2.c | 4 +-
>> >> drivers/mmc/host/sdhci-pxav3.c | 4 +-
>> >> drivers/rtc/rtc-sa1100.c | 4 +-
>> >> drivers/tty/serial/pxa.c | 4 +-
>> >> 25 files changed, 144 insertions(+), 143 deletions(-)
>> >
>> > I agree with the need to change, however, this has been in the binding
>> > documentation since v3.5. I wish we had caught this when we decided
>> > against using stock ticker symbols (not all stock markets use
>> > alphabetical abbreviated names, not all companies are listed on any
>> > stock exchange).
>> >
>> > To do this properly, the drivers are going to have to be compatible with
>> > the old and the new names, and the binding docs updated to reflect the
>> > legacy name and the preferred name.
>> >
>>
>> It's better to only use the new names.
>
> In the dts{i}, yes. But we don't want to break systems in the field
> with "mrvl,..." compatible strings. Therefore, at least the drivers
> need an extra compatible string to support "mrvl,...".
>
> If it had just been since v3.9, it'd be different/simpler. However,
> several vendors have opted to use kernels newer than v3.5, which makes
> this scenario a real possibility.
>
> thx,
>
> Jason.

Is there any vendor using DT for this Marvell chip? I think the answer is no.
Only Marvell guys are still moving to DT. They didn't deliver their kernel
as reference. So there's no problem on this.

Regards
Haojian


\
 
 \ /
  Last update: 2013-07-10 23:58    [W:0.107 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site