lkml.org 
[lkml]   [2013]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] arm: atmel: at91sam9n12: add qt1070 support
Date
add qt1070 support on at91sam9n12ek board

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
arch/arm/boot/dts/at91sam9n12ek.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d59b70c..3acac62 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -40,6 +40,15 @@

i2c0: i2c@f8010000 {
status = "okay";
+
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioA>;
+ interrupts = <2 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ };
};

i2c1: i2c@f8014000 {
@@ -66,6 +75,13 @@
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */
};
};
+
+ qt1070 {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA2 GPIO with pull up deglith */
+ };
+ };
};

spi0: spi@f0000000 {
--
1.7.9.5


\
 
 \ /
  Last update: 2013-07-10 23:52    [W:0.047 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site