lkml.org 
[lkml]   [2013]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.4-stable] mmc: block: fix a bug of error handling in MMC driver
Date
Backport for 3.4-stable for the following patch:
https://lkml.org/lkml/2013/5/10/20

This patch fixes a bug of error handling in Linux MMC driver.

Current MMC driver doesn't handle generic error (bit19 of device
status) in write sequence. As a result, write data gets lost when
generic error occurs. For example, a generic error when updating a
filesystem management information causes a loss of write data and
corrupts the filesystem. In the worst case, the system will never
boot.

This patch includes the following functionality:
1. To enable error checking for the response of CMD12 and CMD13
in write command sequence
2. To retry write sequence when a generic error occures

This patch was also posted to 3.4.46-LTSI.
https://patchwork.kernel.org/patch/2726801/

Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
---
drivers/mmc/card/block.c | 46 +++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 43 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 833ff16..e77053f 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -701,7 +701,7 @@ static int mmc_blk_cmd_error(struct request *req, const char *name, int error,
* Otherwise we don't understand what happened, so abort.
*/
static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
- struct mmc_blk_request *brq, int *ecc_err)
+ struct mmc_blk_request *brq, int *ecc_err, int *gen_err)
{
bool prev_cmd_status_valid = true;
u32 status, stop_status = 0;
@@ -739,6 +739,16 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
(brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
*ecc_err = 1;

+ /* Flag General errors */
+ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
+ if ((status & R1_ERROR) ||
+ (brq->stop.resp[0] & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n",
+ req->rq_disk->disk_name, __func__,
+ brq->stop.resp[0], status);
+ *gen_err = 1;
+ }
+
/*
* Check the current card state. If it is in some data transfer
* mode, tell it to stop (and hopefully transition back to TRAN.)
@@ -758,6 +768,13 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
return ERR_ABORT;
if (stop_status & R1_CARD_ECC_FAILED)
*ecc_err = 1;
+ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
+ if (stop_status & R1_ERROR) {
+ pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
+ req->rq_disk->disk_name, __func__,
+ stop_status);
+ *gen_err = 1;
+ }
}

/* Check for set block count errors */
@@ -1007,7 +1024,7 @@ static int mmc_blk_err_check(struct mmc_card *card,
mmc_active);
struct mmc_blk_request *brq = &mq_mrq->brq;
struct request *req = mq_mrq->req;
- int ecc_err = 0;
+ int ecc_err = 0, gen_err = 0;

/*
* sbc.error indicates a problem with the set block count
@@ -1021,7 +1038,7 @@ static int mmc_blk_err_check(struct mmc_card *card,
*/
if (brq->sbc.error || brq->cmd.error || brq->stop.error ||
brq->data.error) {
- switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err)) {
+ switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) {
case ERR_RETRY:
return MMC_BLK_RETRY;
case ERR_ABORT:
@@ -1051,6 +1068,15 @@ static int mmc_blk_err_check(struct mmc_card *card,
*/
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
u32 status;
+
+ /* Check stop command response */
+ if (brq->stop.resp[0] & R1_ERROR) {
+ pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
+ req->rq_disk->disk_name, __func__,
+ brq->stop.resp[0]);
+ gen_err = 1;
+ }
+
do {
int err = get_card_status(card, &status, 5);
if (err) {
@@ -1058,6 +1084,13 @@ static int mmc_blk_err_check(struct mmc_card *card,
req->rq_disk->disk_name, err);
return MMC_BLK_CMD_ERR;
}
+
+ if (status & R1_ERROR) {
+ pr_err("%s: %s: general error sending status command, card status %#x\n",
+ req->rq_disk->disk_name, __func__,
+ status);
+ gen_err = 1;
+ }
/*
* Some cards mishandle the status bits,
* so make sure to check both the busy
@@ -1067,6 +1100,13 @@ static int mmc_blk_err_check(struct mmc_card *card,
(R1_CURRENT_STATE(status) == R1_STATE_PRG));
}

+ /* if general error occurs, retry the write operation. */
+ if (gen_err) {
+ pr_warning("%s: retrying write for general error\n",
+ req->rq_disk->disk_name);
+ return MMC_BLK_RETRY;
+ }
+
if (brq->data.error) {
pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
req->rq_disk->disk_name, brq->data.error,
--
1.7.0.4



\
 
 \ /
  Last update: 2013-07-01 10:41    [W:0.071 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site