Messages in this thread Patch in this message | | | From | Lee Jones <> | Subject | [PATCH 04/10] ARM: ux500: Provide the supply regulator through consumers | Date | Fri, 7 Jun 2013 17:11:22 +0100 |
| |
The supply name is now provided through the regulator descriptor, so instead of applying a supply_regulator name for each subordinate regulator requiring it, we can just register a link between the chip and supply name to achieve the same thing. This reduces platform data code and standardises the semantics between ATAG and DT boots.
Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/mach-ux500/board-mop500-regulators.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 0dc44c6..70111d5 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,7 +374,6 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { - .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -388,7 +387,6 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { - .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -404,7 +402,6 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { - .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, @@ -495,6 +492,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = { /* SIM supply for 3 V SIM cards */ REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), + REGULATOR_SUPPLY("vin", "ab8500-regulator.0"), }; /* extended configuration for VextSupply2, only used for HREFP_V20 boards */ -- 1.7.10.4
| |