lkml.org 
[lkml]   [2013]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] xen/blkback: Check for insane amounts of request on the ring.
On Tue, Jun 04, 2013 at 03:57:06PM -0400, Konrad Rzeszutek Wilk wrote:
> Check that the ring does not have an insane amount of requests
> (more than there could fit on the ring).
>
> If we detect this case we will stop processing the requests
> and wait until the XenBus disconnects the ring.
>
> Looking at the code, one would expect that the existing check
> RING_REQUEST_CONS_OVERFLOW which checks for how many responses we
> have created in the past (rsp_prod_pvt) vs requests consumed (req_cons)
> and that difference between is greater or equal to the size of the
> ring. If that condition is satisfied that means we should not be
> processing more requests as we still have a backlog of responses
> to finish. Note that both of those values (rsp_prod_pvt and req_cons)
> are not exposed on the shared ring.
>
> To understand this problem a mini crash course in ring protocol
> response/request updates.
>
> There are four entries: req_prod and rsp_prod; req_event and rsp_event.
> We are only concerned about the first two - which set the tone of
> this bug.
>
> The req_prod is a value incremented by frontend for each request put
> on the ring. Conversely the rsp_prod is a value incremented by the backend
> for each response put on the ring (rsp_prod gets set by rsp_prod_pvt when
> pushing the responses on the ring). Both values can
> wrap and are modulo the size of the ring (in block case that is 32).
> Please see RING_GET_REQUEST and RING_GET_RESPONSE for the more details.
>
> The culprit here is that if the difference between the
> req_prod and req_cons is greater than the ring size we have a problem.
> Fortunately for us, the '__do_block_io_op' loop:
>
> rc = blk_rings->common.req_cons;
> rp = blk_rings->common.sring->req_prod;
>
> while (rc != rp) {
>
> ..
> blk_rings->common.req_cons = ++rc; /* before make_response() */
>
> }
>
> will loop up to the point when rc == rp. The macros inside of the
> loop (RING_GET_REQUEST) is smart and is indexing based on the modulo
> of the ring size. If the frontend has provided a bogus req_prod value
> we will loop until the 'rc == rp' - which means we could be processing
> already processed requests (or responses) often.
>
> The reason the RING_REQUEST_CONS_OVERFLOW is not helping here is
> b/c it only tracks how many responses we have internally produced
> and whether we would should process more. The astute reader will
> notice that the macro RING_REQUEST_CONS_OVERFLOW provides two
> arguments - more on this later.
>
> For example, if we were to enter this function with these values:
>
> blk_rings->common.sring->req_prod = X+31415 (X is the value from
> the last time __do_block_io_op was called).
> blk_rings->common.req_cons = X
> blk_rings->common.rsp_prod_pvt = X
>
> The RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, blk_rings->common.req_cons)
> is doing:
>
> req_cons - sring->rsp_prod_pvt >= 32
>
> Which is,
> X - X >= 32 or 0 >= 32
>
> And that is false, so we continue on looping (this bug).
>
> If we re-use said macro RING_REQUEST_CONS_OVERFLOW and pass in the rp
> instead (sring->req_prod) of rc, the this macro can do the check:
>
> req_prod - sring->rsp_prov_pvt >= 32
>
> Which is,
> X + 31415 - X >= 32 , or 31415 >= 32
>
> which is true, so we can error out and break out of the function.
>
> Cc: stable@vger.kernel.org
> [v1: Move the check outside the loop]
> [v2: Add a pr_warn as suggested by David]
> [v3: Use RING_REQUEST_CONS_OVERFLOW as suggested by Jan]
> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> ---
> drivers/block/xen-blkback/blkback.c | 14 ++++++++++++--
> drivers/block/xen-blkback/common.h | 2 ++
> drivers/block/xen-blkback/xenbus.c | 2 ++
> 3 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
> index d81dfca..c4b23be 100644
> --- a/drivers/block/xen-blkback/blkback.c
> +++ b/drivers/block/xen-blkback/blkback.c
> @@ -397,7 +397,7 @@ int xen_blkif_schedule(void *arg)
> {
> struct xen_blkif *blkif = arg;
> struct xen_vbd *vbd = &blkif->vbd;
> -
> + int rc = 0;
> xen_blkif_get(blkif);
>
> while (!kthread_should_stop()) {
> @@ -417,8 +417,12 @@ int xen_blkif_schedule(void *arg)
> blkif->waiting_reqs = 0;
> smp_mb(); /* clear flag *before* checking for work */
>
> - if (do_block_io_op(blkif))
> + rc = do_block_io_op(blkif);
> + if (rc > 0)
> blkif->waiting_reqs = 1;
> + if (rc == -EACCES)
> + wait_event_interruptible(blkif->shutdown_wq,
> + kthread_should_stop());
>
> if (log_stats && time_after(jiffies, blkif->st_print))
> print_stats(blkif);
> @@ -778,6 +782,12 @@ __do_block_io_op(struct xen_blkif *blkif)
> rp = blk_rings->common.sring->req_prod;
> rmb(); /* Ensure we see queued requests up to 'rp'. */
>
> + /* N.B. 'rp', not 'rc'. */
> + if (RING_REQUEST_CONS_OVERFLOW(&blk_rings->common, rp)) {
> + pr_warn(DRV_PFX "Frontend provided bogus ring requests (%d - %d = %d). Halting ring processing on dev=%04x\n",
> + rp, rc, rp - rc, blkif->vbd.pdevice);

Hm, I seem to be able to get:

[ 189.398095] xen-blkback:Frontend provided bogus ring requests (125 - 115 = 10). Halting ring processing on dev=800011
or:
[ 478.558699] xen-blkback:Frontend provided bogus ring requests (95 - 94 = 1). Halting ring processing on dev=800011

Which is clearly wrong. Piggybacking on the rsp_prod_pvt does not seem to cut it.


\
 
 \ /
  Last update: 2013-06-07 22:41    [W:0.113 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site