lkml.org 
[lkml]   [2013]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH V2 1/2] x86/microcode/amd: make find_ucode_in_initrd() __init
From
On Thu, Jun 6, 2013 at 12:45 PM, Jacob Shin <jacob.shin@amd.com> wrote:
> Change find_ucode_in_initrd() to __init and only let BSP call it
> during cold boot. This is the right thing to do because only BSP will
> see initrd loaded by the boot loader. APs will offset into
> initrd_start to find the microcode patch binary.
>
> Reported-by: Yinghai Lu <yinghai@kernel.org>
> Signed-off-by: Jacob Shin <jacob.shin@amd.com>
> ---
> arch/x86/kernel/microcode_amd_early.c | 110 +++++++++++++++++++++++----------
> 1 file changed, 79 insertions(+), 31 deletions(-)
>
> diff --git a/arch/x86/kernel/microcode_amd_early.c b/arch/x86/kernel/microcode_amd_early.c
> index 9618805..52f647d 100644
> --- a/arch/x86/kernel/microcode_amd_early.c
> +++ b/arch/x86/kernel/microcode_amd_early.c
> @@ -9,6 +9,7 @@
> */
>
> #include <linux/earlycpio.h>
> +#include <linux/initrd.h>
>
> #include <asm/cpu.h>
> #include <asm/setup.h>
> @@ -16,40 +17,59 @@
>
> static bool ucode_loaded;
> static u32 ucode_new_rev;
> +static unsigned long ucode_offset;
> +static size_t ucode_size;
>
> /*
> * Microcode patch container file is prepended to the initrd in cpio format.
> * See Documentation/x86/early-microcode.txt
> */
> -static __cpuinitdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin";
> +static __initdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin";
>
> -static struct cpio_data __cpuinit find_ucode_in_initrd(void)
> +static struct cpio_data __init find_ucode_in_initrd(void)
> {
> long offset = 0;
> + char *path;
> + void *start;
> + size_t size;
> + unsigned long *uoffset;
> + size_t *usize;
> struct cpio_data cd;
>
> #ifdef CONFIG_X86_32
> + struct boot_params *p;
> +
> /*
> * On 32-bit, early load occurs before paging is turned on so we need
> * to use physical addresses.
> */
> - if (!(read_cr0() & X86_CR0_PG)) {
> - struct boot_params *p;
> - p = (struct boot_params *)__pa_nodebug(&boot_params);
> - cd = find_cpio_data((char *)__pa_nodebug(ucode_path),
> - (void *)p->hdr.ramdisk_image, p->hdr.ramdisk_size,
> - &offset);
> - } else
> + p = (struct boot_params *)__pa_nodebug(&boot_params);
> + path = (char *)__pa_nodebug(ucode_path);
> + start = (void *)p->hdr.ramdisk_image;
> + size = p->hdr.ramdisk_size;
> + uoffset = (unsigned long *)__pa_nodebug(&ucode_offset);
> + usize = (size_t *)__pa_nodebug(&ucode_size);
> +#else
> + path = ucode_path;
> + start = (void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET);
> + size = boot_params.hdr.ramdisk_size;
> + uoffset = &ucode_offset;
> + usize = &ucode_size;
> #endif
> - cd = find_cpio_data(ucode_path,
> - (void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET),
> - boot_params.hdr.ramdisk_size, &offset);
> +
> + cd = find_cpio_data(path, start, size, &offset);
> + if (!cd.data)
> + return cd;
>
> if (*(u32 *)cd.data != UCODE_MAGIC) {
> cd.data = NULL;
> cd.size = 0;
> + return cd;
> }
>
> + *uoffset = (u8 *)cd.data - (u8 *)start;
> + *usize = cd.size;
> +
> return cd;
> }
>
> @@ -62,9 +82,8 @@ static struct cpio_data __cpuinit find_ucode_in_initrd(void)
> * load_microcode_amd() to save equivalent cpu table and microcode patches in
> * kernel heap memory.
> */
> -static void __cpuinit apply_ucode_in_initrd(void)
> +static void __cpuinit apply_ucode_in_initrd(void *ucode, size_t size)
> {
> - struct cpio_data cd;
> struct equiv_cpu_entry *eq;
> u32 *header;
> u8 *data;
> @@ -78,12 +97,9 @@ static void __cpuinit apply_ucode_in_initrd(void)
> #else
> new_rev = &ucode_new_rev;
> #endif
> - cd = find_ucode_in_initrd();
> - if (!cd.data)
> - return;
>
> - data = cd.data;
> - left = cd.size;
> + data = ucode;
> + left = size;
> header = (u32 *)data;
>
> /* find equiv cpu table */
> @@ -129,7 +145,11 @@ static void __cpuinit apply_ucode_in_initrd(void)
>
> void __init load_ucode_amd_bsp(void)
> {
> - apply_ucode_in_initrd();
> + struct cpio_data cd = find_ucode_in_initrd();
> + if (!cd.data)
> + return;
> +
> + apply_ucode_in_initrd(cd.data, cd.size);
> }
>
> #ifdef CONFIG_X86_32
> @@ -145,12 +165,29 @@ u8 amd_bsp_mpb[MPB_MAX_SIZE];
> void __cpuinit load_ucode_amd_ap(void)
> {
> struct microcode_amd *mc;
> + unsigned long *initrd;
> + unsigned long *uoffset;
> + size_t *usize;
> + void *ucode;
>
> - mc = (struct microcode_amd *)__pa_nodebug(amd_bsp_mpb);
> - if (mc->hdr.patch_id && mc->hdr.processor_rev_id)
> + mc = (struct microcode_amd *)__pa(amd_bsp_mpb);
> + if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
> __apply_microcode_amd(mc);
> - else
> - apply_ucode_in_initrd();
> + return;
> + }
> +
> + initrd = (unsigned long *)__pa(&initrd_start);
> + uoffset = (unsigned long *)__pa(&ucode_offset);
> + usize = (size_t *)__pa(&ucode_size);
> +
> + if (!(*usize))
> + return;
> +
> + if (!(*initrd))
> + return;

could be save three lines if use
if (!(*initrd) || !(*usize))
return;

> +
> + ucode = (void *)((unsigned long)__pa(*initrd) + *uoffset);
> + apply_ucode_in_initrd(ucode, *usize);
> }
>
> static void __init collect_cpu_sig_on_bsp(void *arg)
> @@ -181,8 +218,16 @@ void __cpuinit load_ucode_amd_ap(void)
> collect_cpu_info_amd_early(&cpu_data(cpu), ucode_cpu_info + cpu);
>
> if (cpu && !ucode_loaded) {
> - struct cpio_data cd = find_ucode_in_initrd();
> - if (load_microcode_amd(0, cd.data, cd.size) != UCODE_OK)
> + void *ucode;
> +
> + if (!ucode_size)
> + return;
> +
> + if (!initrd_start)
> + return;

same

> +
> + ucode = (void *)(initrd_start + ucode_offset);
> + if (load_microcode_amd(0, ucode, ucode_size) != UCODE_OK)
> return;
> ucode_loaded = true;
> }
> @@ -194,7 +239,7 @@ void __cpuinit load_ucode_amd_ap(void)
> int __init save_microcode_in_initrd_amd(void)
> {
> enum ucode_state ret;
> - struct cpio_data cd;
> + void *ucode;
> #ifdef CONFIG_X86_32
> unsigned int bsp = boot_cpu_data.cpu_index;
> struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
> @@ -209,11 +254,14 @@ int __init save_microcode_in_initrd_amd(void)
> if (ucode_loaded)
> return 0;
>
> - cd = find_ucode_in_initrd();
> - if (!cd.data)
> - return -EINVAL;
> + if (!ucode_size)
> + return 0;
> +
> + if (!initrd_start)
> + return 0;

same

>
> - ret = load_microcode_amd(0, cd.data, cd.size);
> + ucode = (void *)(initrd_start + ucode_offset);
> + ret = load_microcode_amd(0, ucode, ucode_size);
> if (ret != UCODE_OK)
> return -EINVAL;
>
> --
> 1.7.9.5
>
>


\
 
 \ /
  Last update: 2013-06-06 22:41    [W:2.770 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site