lkml.org 
[lkml]   [2013]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [Arm-netbook] getting allwinner SoC support upstream (was Re: Uploading linux (3.9.4-1))
From
On Thu, Jun 6, 2013 at 12:07 AM, jonsmirl@gmail.com <jonsmirl@gmail.com> wrote:
> On Wed, Jun 5, 2013 at 6:47 PM, luke.leighton <luke.leighton@gmail.com> wrote:
>> On Wed, Jun 5, 2013 at 10:59 PM, Henrik Nordström
>> <henrik@henriknordstrom.net> wrote:
>>
>>>> .... and then there's the boot0 and boot1 loaders, these *do* have
>>
>>> no, these are not tiny. boot0 is 24KB to fit the initial embedded SRAM
>>> (not cache), but boot1 is on pair with u-boot in size and runs from
>>> DRAM.
>>
>> btw, please listen to henrik: he knows what he's talking about, as
>> you can see :) henrik, thank you for correcting my technical
>> misunderstandings, i'll try to remember them and not propagate
>> incorrect stuff.
>
> This is not about the fex syntax or uboot. The root problem is needing
> two sets of binding for every device driver in the kernel. Pick a
> random driver like gpio-pca953x.c and look at the source. In that file
> there are #ifdef CONFIG_OF_ sections. Those sections are directly
> reading the FDT binary via calls like of_get_property(node,
> "linux,gpio-base", &size);. If fex is added to the kernel every driver
> driver will now need both a #ifdef CONFIG_OF_ section and also a
> #ifdef CONFIG_FEX_ section. Doing that is just crazy.

yes. which is why they haven't done it.

> Is Allwinner
> going to add fex support to every single device driver in the kernel?

no john - they've only added it to the multiplexed sections of the
drivers which they themselves have written. such as
drivers/usb/sun{N}i_usb/*.[ch], drivers/block/nand/sun{N}_i,
arch/arm/mach-sun{N}i and so on.

even the touchscreen driver that they wrote, that's got nothing to do
with any other code in the touchscreen linux kernel source tree: it's
more of a "meta-"driver which even has the name of the linux kernel
module that needs to be loaded and what I2C address, GPIO options etc.
to pass in [normally done as modprobe options in userspace].

to be honest, there are better people to fully answer this question
(alejandro and henrik are two that spring to mind) but you're
definitely off-base, jon. the script.fex system deals with the pinmux
issue in a very neat way that:

a) has very little impact on the rest of the kernel tree [citation
needed! i'm saying that: could someone please confirm if it's true]

b) the linux kernel developers could, instead of criticising it,
actually learn a great deal from.

l.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-06-06 02:01    [W:0.352 / U:9.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site