lkml.org 
[lkml]   [2013]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 10/53] Input: atmel_mxt_ts - Add memory access interface via sysfs
Date
On Wednesday, June 05, 2013 07:45:04 PM Nick Dyer wrote:
> Dmitry Torokhov wrote:
> > On Wednesday, June 05, 2013 06:37:03 PM Nick Dyer wrote:
> >> Atmel maXTouch chips can be addressed via an "Object Based Protocol"
> >> which
> >> defines how i2c registers are mapped to different functions within the
> >> chips. This interface exposes the register map and allows user-space
> >> utilities to inspect and alter object configuration, and to view
> >> diagnostic
> >> data, while the device is running.
> >
> > I think if the driver was to use regmap then this fucntionality will
> > already be there as regmap exports registers via debugfs.
>
> Yes, this was suggested in the past and I spent some time looking into it.
>
> We have made a deliberate choice to implement this via sysfs rather than
> debugfs since it needs to work on devices that don't have debugfs enabled.

Then they will have to enable it. Re-implementing something because
someone might not enable needed subsystem is not a good idea. Let's
say somebody disabled I2C - will you write your own implementation because
of that? Of course not, you just say that for given functionality it
is a prerequisite.

>
> In addition, there are some quirks about the way in which we have to
> read/write registers which means regmap isn't a good fit.

Could you please elaborate more on this?

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2013-06-05 21:41    [W:0.498 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site