lkml.org 
[lkml]   [2013]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] arm: zynq: Add cpuidle support
Date
Add support for cpuidle.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v4:
- Add record to MAINTAINERS file
- Use long license in header + Maintainer record
- Remove unused headers
- Fix indentations
- s/zynq_init_cpuidle/zynq_cpuidle_init/g
- use cpuidle_register function
- Do not use module_init, use device_initcall instead
(Using it as module is not possible because some
arm core functions are not exported for modules)

Changes in v3:
- Move driver to drivers/cpuidle/
- Check zynq compatible string suggested by Arnd
- Use zynq_ function prefix because of multiplatform kernel
- Incorporate comments from Daniel Lezcano
- Rebase on the top of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next

Changes in v2:
- Fix file header

Changes in v1:
- It was the part of Zynq core changes
https://patchwork.kernel.org/patch/2342511/

MAINTAINERS | 1 +
drivers/cpuidle/Kconfig | 6 +++
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/cpuidle-zynq.c | 83 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 91 insertions(+)
create mode 100644 drivers/cpuidle/cpuidle-zynq.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 90f45f4..6e4d4e0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1309,6 +1309,7 @@ W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
S: Supported
F: arch/arm/mach-zynq/
+F: drivers/cpuidle/cpuidle-zynq.c

ARM64 PORT (AARCH64 ARCHITECTURE)
M: Catalin Marinas <catalin.marinas@arm.com>
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e..8272a08 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -39,4 +39,10 @@ config CPU_IDLE_CALXEDA
help
Select this to enable cpuidle on Calxeda processors.

+config CPU_IDLE_ZYNQ
+ bool "CPU Idle Driver for Xilinx Zynq processors"
+ depends on ARCH_ZYNQ
+ help
+ Select this to enable cpuidle on Xilinx Zynq processors.
+
endif
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 0d8bd55..8767a7b 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o

obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
+obj-$(CONFIG_CPU_IDLE_ZYNQ) += cpuidle-zynq.o
diff --git a/drivers/cpuidle/cpuidle-zynq.c b/drivers/cpuidle/cpuidle-zynq.c
new file mode 100644
index 0000000..38e03a1
--- /dev/null
+++ b/drivers/cpuidle/cpuidle-zynq.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2012-2013 Xilinx
+ *
+ * CPU idle support for Xilinx Zynq
+ *
+ * based on arch/arm/mach-at91/cpuidle.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ *
+ * Maintainer: Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <linux/init.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpuidle.h>
+#include <linux/of.h>
+#include <asm/proc-fns.h>
+#include <asm/cpuidle.h>
+
+#define ZYNQ_MAX_STATES 2
+
+/* Actual code that puts the SoC in different idle states */
+static int zynq_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
+{
+ /* Devices must be stopped here */
+ cpu_pm_enter();
+
+ /* Add code for DDR self refresh start */
+ cpu_do_idle();
+
+ /* Add code for DDR self refresh stop */
+ cpu_pm_exit();
+
+ return index;
+}
+
+static struct cpuidle_driver zynq_idle_driver = {
+ .name = "zynq_idle",
+ .owner = THIS_MODULE,
+ .states = {
+ ARM_CPUIDLE_WFI_STATE,
+ {
+ .enter = zynq_enter_idle,
+ .exit_latency = 10,
+ .target_residency = 10000,
+ .flags = CPUIDLE_FLAG_TIME_VALID |
+ CPUIDLE_FLAG_TIMER_STOP,
+ .name = "RAM_SR",
+ .desc = "WFI and RAM Self Refresh",
+ },
+ },
+ .safe_state_index = 0,
+ .state_count = ZYNQ_MAX_STATES,
+};
+
+/* Initialize CPU idle by registering the idle states */
+static int __init zynq_cpuidle_init(void)
+{
+ if (!of_machine_is_compatible("xlnx,zynq-7000"))
+ return -ENODEV;
+
+ pr_info("Xilinx Zynq CpuIdle Driver started\n");
+
+ return cpuidle_register(&zynq_idle_driver, NULL);
+}
+
+device_initcall(zynq_cpuidle_init);
--
1.8.2.3
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-06-04 10:21    [W:0.063 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site