lkml.org 
[lkml]   [2013]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/8] spi: spi-ep93xx: move the clock divider calcs into ep93xx_spi_chip_setup()
On Fri, Jun 28, 2013 at 11:45:28AM -0700, H Hartley Sweeten wrote:
> The divider values stored in the per chip data are only used to set the
> registers in the hardware to generate the desired SPI clock. Since these
> are calculated per transfer based on the t->speed_hz there is no reason
> keep them in the per chip data.
>
> Move the ep93xx_spi_calc_divisors() call into ep93xx_spi_chip_setup()
> and return the dividers thru pointers. Remove the divider values from
> the per chip data structure.
>
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <rmallon@gmail.com>
> Cc: Mika Westerberg <mika.westerberg@iki.fi>

Acked-by: Mika Westerberg <mika.westerberg@iki.fi>


\
 
 \ /
  Last update: 2013-06-30 19:21    [W:0.042 / U:12.776 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site