lkml.org 
[lkml]   [2013]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression in RCU subsystem in latest mainline kernel
On Wed, Jun 26, 2013 at 06:10:58PM +1000, Michael Ellerman wrote:
> On Tue, Jun 25, 2013 at 09:03:32AM -0700, Paul E. McKenney wrote:
> > On Tue, Jun 25, 2013 at 05:44:23PM +1000, Michael Ellerman wrote:
> > > On Tue, Jun 25, 2013 at 05:19:14PM +1000, Michael Ellerman wrote:
> > > >
> > > > Here's another trace from 3.10-rc7 plus a few local patches.
> > >
> > > And here's another with CONFIG_RCU_CPU_STALL_INFO=y in case that's useful:
> > >
> > > PASS running test_pmc5_6_overuse()
> > > INFO: rcu_sched self-detected stall on CPU
> > > 8: (1 GPs behind) idle=8eb/140000000000002/0 softirq=215/220
> >
> > So this CPU has been out of action since before the beginning of the
> > current grace period ("1 GPs behind"). It is not idle, having taken
> > a pair of nested interrupts from process context (matching the stack
> > below). This CPU has take five softirqs since the last grace period
> > that it noticed, which makes it likely that the loop is within the
> > softirq handler.
> >
> > > (t=2100 jiffies g=18446744073709551583 c=18446744073709551582 q=13)
> >
> > Assuming HZ=100, this stall has been going on for 21 seconds. There
> > is a grace period in progress according to RCU's global state (which
> > this CPU is not yet aware of). There are a total of 13 RCU callbacks
> > queued across the entire system.
> >
> > If the system is at all responsive, I suggest using ftrace (either from
> > the boot command line or at runtime) to trace __do_softirq() and
> > hrtimer_interrupt().
>
> Thanks for decoding it Paul.
>
> I've narrowed down the test case and I think this is probably just a
> case of too many perf interrupts. If I reduce the sampling period by
> half the test runs fine.
>
> There is logic in perf to detect an interrupt storm, but for some reason
> it's not saving us. I'll dig in there, but I don't think it's an RCU
> problem.

Whew! ;-)

Thanx, Paul



\
 
 \ /
  Last update: 2013-06-27 03:41    [W:0.075 / U:2.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site