lkml.org 
[lkml]   [2013]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/1] pinctrl: add Intel BayTrail GPIO/pinctrl support
On 06/18/2013 06:17 PM, Linus Walleij wrote:
> On Tue, Jun 18, 2013 at 1:33 PM, Mathias Nyman
> <mathias.nyman@linux.intel.com> wrote:
>
>> Add support for gpio on Intel BayTrail platforms. BayTrail supports 3 banks
>> of gpios called SCORE, NCORE ans SUS with 102, 28 and 44 gpio pins.
>> Supports gpio interrupts and ACPI gpio events
>>
>> Pins may be muxed to alternate function instead of gpio by firmware.
>> This driver does not touch the pin muxing and expect firmare
>> to set pin muxing and pullup/down properties properly.
>>
>> Signed-off-by: Mathias Nyman<mathias.nyman@linux.intel.com>
>
> I have a feeling this driver will evolve quite a bit and eventually
> register a pure pinctrl interface as well (currently it's only using
> the ranges as some data container...)
>
> Anyway, it's a good starting point and obviously (I guess?)
> gets your hardware up an ticking, so let's take this as a
> starting point.
>
> So patch applied.
>

Thanks, much appreciated.
We'll see how it evolves.

> This thing only seems to use gpiolib-acpi.c for the basic
> device matching and IRQ handling backend, is that correct?

It only uses gpiolib-acpi.c for handling GPIO-signaled ACPI Events,
which are like SCI events on hardware reduced ACPI platforms.

Basically It's ACPI saying "I have a firmware method that needs to be
run if a certain gpio is triggered, please do that for me"

So the acpi_gpiochip_request_interrupts() registers interrupt handlers
which call ACPI firmware methods for those gpio interrupts.

Otherwise gpiolib-acpi.c is useful for other device drivers to translate
ACPI gpio resource numbers to linux gpio numbers. In ACPI tables the
gpio resource numbers are per controller and zero based.
>
> What I'm thinking of moving forward is that I have seen
> ACPI fragments with things like "PullUp" etc, which is pinctrl
> domain, so we may come to need some generic ACPI helpers
> inside drivers/pinctrl as well sooner or later.

Probably yes, I'm not an expert on ACPI (or pinctrl), but ACPI5 added
the GpioInt and GpioIo resources for devices. GpioInt resource
descriptor has the follwing arguments: GpioInt(EdgeLevel, ActiveLevel,
Shared, PinConfig, DebounceTimeout, ResourceSource,
esourceSourceIndex, ResourceUsage, DescriptorName, VendorData) {PinList}

Where the PinConfig argument can be PullDefault, PullUp, PullDown,
PullNone or some vendor specific value.

ResourceSource tells which gpio controller the pin belongs to.

Right now drivers only have helpers for translating the ACPI gpio pin
number to linux gpio number.

-Mathias


\
 
 \ /
  Last update: 2013-06-19 13:01    [W:0.172 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site