lkml.org 
[lkml]   [2013]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 0/4] ARM: OMAP2+: Panda USB Host support and DVI EDID fix
    Date
    Hi Benoit & Tony,

    The first two patches make changes to dts files to get USB host support
    and DVI EDID to work on Panda.

    The third patch should get USB host functional on uEVM.

    The fourth patch is a temporary workaround to create a clock alias to
    the USB PHY clock as it is not possible to define this via device tree.
    This patch is required for USB host to work on Panda and uEVM.

    The first 3 patches are for Benoit and the last one is for Tony.

    Changes in v2:
    - Fixed subject for patch 4
    - Added "regulator-always-on" for Panda's USB Hub regulator

    cheers,
    -roger

    Roger Quadros (4):
    ARM: dts: omap4-panda: Add USB Host support
    ARM: dts: omap4-panda: Fix DVI EDID reads
    ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
    ARM: OMAP2+: Provide alias to USB PHY clock

    arch/arm/boot/dts/omap4-panda-common.dtsi | 69 +++++++++++++++++++++++++++++
    arch/arm/boot/dts/omap5-uevm.dts | 7 +++
    arch/arm/mach-omap2/board-generic.c | 23 +++++++++-
    3 files changed, 98 insertions(+), 1 deletions(-)

    --
    1.7.4.1



    \
     
     \ /
      Last update: 2013-06-18 19:01    [W:2.684 / U:0.152 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site