lkml.org 
[lkml]   [2013]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clocksource: sh_cmt: 32-bit control register support
Date
Hi Magnus,

Thanks for the patch.

On Monday 17 June 2013 15:40:52 Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> Add support for CMT hardware with 32-bit control and counter
> registers, as found on r8a73a4 and r8a7790. To use the CMT
> with 32-bit hardware a second I/O memory resource needs to
> point out the CMSTR register and it needs to be 32 bit wide.

Is a memory second resource required ? Can't we use a single resource that
will contain all the registers ?

(and one more comment below)

> Signed-off-by: Magnus Damm <damm@opensource.se>
> ---
>
> Tested on r8a73a4 used on APE6EVM.
>
> drivers/clocksource/sh_cmt.c | 50 +++++++++++++++++++++++++++------------
> 1 file changed, 36 insertions(+), 14 deletions(-)
>
> --- 0001/drivers/clocksource/sh_cmt.c
> +++ work/drivers/clocksource/sh_cmt.c 2013-06-17 13:47:34.000000000 +0900
> @@ -37,6 +37,7 @@
>
> struct sh_cmt_priv {
> void __iomem *mapbase;
> + void __iomem *mapbase_str;
> struct clk *clk;
> unsigned long width; /* 16 or 32 bit version of hardware block */
> unsigned long overflow_bit;
> @@ -79,6 +80,12 @@ struct sh_cmt_priv {
> * CMCSR 0xffca0060 16-bit
> * CMCNT 0xffca0064 32-bit
> * CMCOR 0xffca0068 32-bit
> + *
> + * "32-bit counter and 32-bit control" as found on r8a73a4 and r8a7790:
> + * CMSTR 0xffca0500 32-bit
> + * CMCSR 0xffca0510 32-bit
> + * CMCNT 0xffca0514 32-bit
> + * CMCOR 0xffca0518 32-bit
> */
>
> static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
> @@ -109,9 +116,7 @@ static void sh_cmt_write32(void __iomem
>
> static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
> {
> - struct sh_timer_config *cfg = p->pdev->dev.platform_data;
> -
> - return p->read_control(p->mapbase - cfg->channel_offset, 0);
> + return p->read_control(p->mapbase_str, 0);
> }
>
> static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)
> @@ -127,9 +132,7 @@ static inline unsigned long sh_cmt_read_
> static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
> unsigned long value)
> {
> - struct sh_timer_config *cfg = p->pdev->dev.platform_data;
> -
> - p->write_control(p->mapbase - cfg->channel_offset, 0, value);
> + p->write_control(p->mapbase_str, 0, value);
> }
>
> static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,
> @@ -676,7 +679,7 @@ static int sh_cmt_register(struct sh_cmt
> static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device
> *pdev) {
> struct sh_timer_config *cfg = pdev->dev.platform_data;
> - struct resource *res;
> + struct resource *res, *res2;
> int irq, ret;
> ret = -ENXIO;
>
> @@ -694,6 +697,9 @@ static int sh_cmt_setup(struct sh_cmt_pr
> goto err0;
> }
>
> + /* optional resource for the shared timer start/stop register */
> + res2 = platform_get_resource(p->pdev, IORESOURCE_MEM, 1);
> +
> irq = platform_get_irq(p->pdev, 0);
> if (irq < 0) {
> dev_err(&p->pdev->dev, "failed to get irq\n");
> @@ -707,6 +713,15 @@ static int sh_cmt_setup(struct sh_cmt_pr
> goto err0;
> }
>
> + /* map second resource for CMSTR */
> + p->mapbase_str = ioremap_nocache(res2 ? res2->start :
> + res->start - cfg->channel_offset,
> + res2 ? resource_size(res2) : 2);
> + if (p->mapbase_str == NULL) {
> + dev_err(&p->pdev->dev, "failed to remap I/O second memory\n");
> + goto err1;
> + }
> +
> /* request irq using setup_irq() (too early for request_irq()) */
> p->irqaction.name = dev_name(&p->pdev->dev);
> p->irqaction.handler = sh_cmt_interrupt;
> @@ -719,11 +734,17 @@ static int sh_cmt_setup(struct sh_cmt_pr
> if (IS_ERR(p->clk)) {
> dev_err(&p->pdev->dev, "cannot get clock\n");
> ret = PTR_ERR(p->clk);
> - goto err1;
> + goto err2;
> }
>
> - p->read_control = sh_cmt_read16;
> - p->write_control = sh_cmt_write16;
> + if (res2 && (resource_size(res2) == 4)) {
> + /* assume both CMSTR and CMCSR to be 32-bit */
> + p->read_control = sh_cmt_read32;
> + p->write_control = sh_cmt_write32;
> + } else {
> + p->read_control = sh_cmt_read16;
> + p->write_control = sh_cmt_write16;
> + }
>
> if (resource_size(res) == 6) {
> p->width = 16;
> @@ -752,22 +773,23 @@ static int sh_cmt_setup(struct sh_cmt_pr
> cfg->clocksource_rating);
> if (ret) {
> dev_err(&p->pdev->dev, "registration failed\n");
> - goto err2;
> + goto err3;
> }
> p->cs_enabled = false;
>
> ret = setup_irq(irq, &p->irqaction);
> if (ret) {
> dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> - goto err2;
> + goto err3;
> }
>
> platform_set_drvdata(pdev, p);
>
> return 0;
> -err2:
> +err3:
> clk_put(p->clk);
> -
> +err2:
> + iounmap(p->mapbase_str);
> err1:
> iounmap(p->mapbase);

Time to switch to devm_* managed functions ? :-)

> err0:

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2013-06-17 21:01    [W:0.096 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site