lkml.org 
[lkml]   [2013]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/15] [SCSI] nsp32: use mdelay instead of large udelay constants
Date
ARM cannot handle udelay for more than 2 miliseconds, so we
should use mdelay instead for those.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: GOTO Masanori <gotom@debian.or.jp>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
---
drivers/scsi/nsp32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879d..0665f9c 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
* reset SCSI bus
*/
nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
- udelay(RESET_HOLD_TIME);
+ mdelay(RESET_HOLD_TIME / 1000);
nsp32_write1(base, SCSI_BUS_CONTROL, 0);
for(i = 0; i < 5; i++) {
intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
--
1.8.1.2


\
 
 \ /
  Last update: 2013-06-01 00:41    [W:0.147 / U:1.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site