lkml.org 
[lkml]   [2013]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] [media] uvcvideo: Retry usb_submit_urb on -EPERM return
From
Hi Laurent,

Thanks for the changes! I agree that your synchronization logic is
correct. Just two small comments:

On Mon, Apr 29, 2013 at 1:34 PM, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
> Hi Shawn,
>
> Thank you for the patch.
>
> On Tuesday 23 April 2013 17:42:32 Shawn Nematbakhsh wrote:
>> While usb_kill_urb is in progress, calls to usb_submit_urb will fail
>> with -EPERM (documented in Documentation/usb/URB.txt). The UVC driver
>> does not correctly handle this case -- there is no synchronization
>> between uvc_v4l2_open / uvc_status_start and uvc_v4l2_release /
>> uvc_status_stop.
>
> Wouldn't it be better to synchronize status operations in open/release ?
> Something like the following patch:
>
> From 9285d678ed2f823bb215f6bdec3ca1a9e1cac977 Mon Sep 17 00:00:00 2001
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Date: Fri, 26 Apr 2013 03:28:51 +0200
> Subject: [PATCH] uvcvideo: Fix open/close race condition
>
> Maintaining the users count using an atomic variable makes sure that
> access to the counter won't be racy, but doesn't serialize access to the
> operations protected by the counter. This creates a race condition that
> could result in the status URB being submitted multiple times.
>
> Use a mutex to protect the users count and serialize access to the
> status start and stop operations.
>
> Reported-by: Shawn Nematbakhsh <shawnn@chromium.org>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/usb/uvc/uvc_driver.c | 22 ++++++++++++++++------
> drivers/media/usb/uvc/uvc_status.c | 21 ++-------------------
> drivers/media/usb/uvc/uvc_v4l2.c | 14 ++++++++++----
> drivers/media/usb/uvc/uvcvideo.h | 7 +++----
> 4 files changed, 31 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index e68fa53..b638037 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -1836,8 +1836,8 @@ static int uvc_probe(struct usb_interface *intf,
> INIT_LIST_HEAD(&dev->chains);
> INIT_LIST_HEAD(&dev->streams);
> atomic_set(&dev->nstreams, 0);
> - atomic_set(&dev->users, 0);

I think dev->users is uninitialized now? Probably we should initialize
to 0 here.

> atomic_set(&dev->nmappings, 0);
> + mutex_init(&dev->lock);
>
> dev->udev = usb_get_dev(udev);
> dev->intf = usb_get_intf(intf);
> @@ -1953,8 +1953,12 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
>
> /* Controls are cached on the fly so they don't need to be saved. */
> if (intf->cur_altsetting->desc.bInterfaceSubClass ==
> - UVC_SC_VIDEOCONTROL)
> - return uvc_status_suspend(dev);
> + UVC_SC_VIDEOCONTROL) {
> + mutex_lock(&dev->lock);
> + if (dev->users)
> + uvc_status_stop(dev);
> + mutex_unlock(&dev->lock);

To keep the same control flow, should we return here?

> + }
>
> list_for_each_entry(stream, &dev->streams, list) {
> if (stream->intf == intf)
> @@ -1976,14 +1980,20 @@ static int __uvc_resume(struct usb_interface *intf, int reset)
>
> if (intf->cur_altsetting->desc.bInterfaceSubClass ==
> UVC_SC_VIDEOCONTROL) {
> - if (reset) {
> - int ret = uvc_ctrl_resume_device(dev);
> + int ret = 0;
>
> + if (reset) {
> + ret = uvc_ctrl_resume_device(dev);
> if (ret < 0)
> return ret;
> }
>
> - return uvc_status_resume(dev);
> + mutex_lock(&dev->lock);
> + if (dev->users)
> + ret = uvc_status_start(dev, GFP_NOIO);
> + mutex_unlock(&dev->lock);
> +
> + return ret;
> }
>
> list_for_each_entry(stream, &dev->streams, list) {
> diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
> index b749277..f552ab9 100644
> --- a/drivers/media/usb/uvc/uvc_status.c
> +++ b/drivers/media/usb/uvc/uvc_status.c
> @@ -206,32 +206,15 @@ void uvc_status_cleanup(struct uvc_device *dev)
> uvc_input_cleanup(dev);
> }
>
> -int uvc_status_start(struct uvc_device *dev)
> +int uvc_status_start(struct uvc_device *dev, gfp_t flags)
> {
> if (dev->int_urb == NULL)
> return 0;
>
> - return usb_submit_urb(dev->int_urb, GFP_KERNEL);
> + return usb_submit_urb(dev->int_urb, flags);
> }
>
> void uvc_status_stop(struct uvc_device *dev)
> {
> usb_kill_urb(dev->int_urb);
> }
> -
> -int uvc_status_suspend(struct uvc_device *dev)
> -{
> - if (atomic_read(&dev->users))
> - usb_kill_urb(dev->int_urb);
> -
> - return 0;
> -}
> -
> -int uvc_status_resume(struct uvc_device *dev)
> -{
> - if (dev->int_urb == NULL || atomic_read(&dev->users) == 0)
> - return 0;
> -
> - return usb_submit_urb(dev->int_urb, GFP_NOIO);
> -}
> -
> diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
> index b2dc326..3afff92 100644
> --- a/drivers/media/usb/uvc/uvc_v4l2.c
> +++ b/drivers/media/usb/uvc/uvc_v4l2.c
> @@ -498,16 +498,20 @@ static int uvc_v4l2_open(struct file *file)
> return -ENOMEM;
> }
>
> - if (atomic_inc_return(&stream->dev->users) == 1) {
> - ret = uvc_status_start(stream->dev);
> + mutex_lock(&stream->dev->lock);
> + if (stream->dev->users == 0) {
> + ret = uvc_status_start(stream->dev, GFP_KERNEL);
> if (ret < 0) {
> - atomic_dec(&stream->dev->users);
> + mutex_unlock(&stream->dev->lock);
> usb_autopm_put_interface(stream->dev->intf);
> kfree(handle);
> return ret;
> }
> }
>
> + stream->dev->users++;
> + mutex_unlock(&stream->dev->lock);
> +
> v4l2_fh_init(&handle->vfh, stream->vdev);
> v4l2_fh_add(&handle->vfh);
> handle->chain = stream->chain;
> @@ -538,8 +542,10 @@ static int uvc_v4l2_release(struct file *file)
> kfree(handle);
> file->private_data = NULL;
>
> - if (atomic_dec_return(&stream->dev->users) == 0)
> + mutex_lock(&stream->dev->lock);
> + if (--stream->dev->users == 0)
> uvc_status_stop(stream->dev);
> + mutex_unlock(&stream->dev->lock);
>
> usb_autopm_put_interface(stream->dev->intf);
> return 0;
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index 9cd584a..eb90a92 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -515,7 +515,8 @@ struct uvc_device {
> char name[32];
>
> enum uvc_device_state state;
> - atomic_t users;
> + struct mutex lock; /* Protects users */
> + unsigned int users;
> atomic_t nmappings;
>
> /* Video control interface */
> @@ -661,10 +662,8 @@ void uvc_video_clock_update(struct uvc_streaming *stream,
> /* Status */
> extern int uvc_status_init(struct uvc_device *dev);
> extern void uvc_status_cleanup(struct uvc_device *dev);
> -extern int uvc_status_start(struct uvc_device *dev);
> +extern int uvc_status_start(struct uvc_device *dev, gfp_t flags);
> extern void uvc_status_stop(struct uvc_device *dev);
> -extern int uvc_status_suspend(struct uvc_device *dev);
> -extern int uvc_status_resume(struct uvc_device *dev);
>
> /* Controls */
> extern const struct v4l2_subscribed_event_ops uvc_ctrl_sub_ev_ops;
>
>> This patch adds a retry / timeout when uvc_status_open / usb_submit_urb
>> returns -EPERM. This usually means that usb_kill_urb is in progress, and
>> we just need to wait a while.
>>
>> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
>> ---
>> drivers/media/usb/uvc/uvc_v4l2.c | 10 +++++++++-
>> drivers/media/usb/uvc/uvcvideo.h | 1 +
>> 2 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/media/usb/uvc/uvc_v4l2.c
>> b/drivers/media/usb/uvc/uvc_v4l2.c index b2dc326..f1498a8 100644
>> --- a/drivers/media/usb/uvc/uvc_v4l2.c
>> +++ b/drivers/media/usb/uvc/uvc_v4l2.c
>> @@ -479,6 +479,7 @@ static int uvc_v4l2_open(struct file *file)
>> {
>> struct uvc_streaming *stream;
>> struct uvc_fh *handle;
>> + unsigned long timeout;
>> int ret = 0;
>>
>> uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n");
>> @@ -499,7 +500,14 @@ static int uvc_v4l2_open(struct file *file)
>> }
>>
>> if (atomic_inc_return(&stream->dev->users) == 1) {
>> - ret = uvc_status_start(stream->dev);
>> + timeout = jiffies + msecs_to_jiffies(UVC_STATUS_START_TIMEOUT);
>> + /* -EPERM means stop in progress, wait for completion */
>> + do {
>> + ret = uvc_status_start(stream->dev);
>> + if (ret == -EPERM)
>> + usleep_range(5000, 6000);
>> + } while (ret == -EPERM && time_before(jiffies, timeout));
>> +
>> if (ret < 0) {
>> atomic_dec(&stream->dev->users);
>> usb_autopm_put_interface(stream->dev->intf);
>> diff --git a/drivers/media/usb/uvc/uvcvideo.h
>> b/drivers/media/usb/uvc/uvcvideo.h index af505fd..a47e1d3 100644
>> --- a/drivers/media/usb/uvc/uvcvideo.h
>> +++ b/drivers/media/usb/uvc/uvcvideo.h
>> @@ -122,6 +122,7 @@
>>
>> #define UVC_CTRL_CONTROL_TIMEOUT 300
>> #define UVC_CTRL_STREAMING_TIMEOUT 5000
>> +#define UVC_STATUS_START_TIMEOUT 100
>>
>> /* Maximum allowed number of control mappings per device */
>> #define UVC_MAX_CONTROL_MAPPINGS 1024
> --
> Regards,
>
> Laurent Pinchart
>

Thanks,

Shawn


\
 
 \ /
  Last update: 2013-05-04 01:21    [W:0.075 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site