lkml.org 
[lkml]   [2013]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subjectmakedumpfile mmap() benchmark
From
Date

> Jingbai Ma wote on 27 Mar 2013:
> I have tested the makedumpfile mmap patch on a machine with 2TB memory,
> here is testing results:
> Test environment:
> Machine: HP ProLiant DL980 G7 with 2TB RAM.
> CPU: Intel(R) Xeon(R) CPU E7- 2860 @ 2.27GHz (8 sockets, 10 cores)
> (Only 1 cpu was enabled the 2nd kernel)
> Kernel: 3.9.0-rc3+ with mmap kernel patch v3
> vmcore size: 2.0TB
> Dump file size: 3.6GB
> makedumpfile mmap branch with parameters: -c --message-level 23 -d 31
> --map-size <map-size>
> All measured time from debug message of makedumpfile.
>
> As a comparison, I also have tested with original kernel and original
> makedumpfile 1.5.1 and 1.5.3.
> I added all [Excluding unnecessary pages] and [Excluding free pages]
> time together as "Filter Pages", and [Copyying Data] as "Copy data" here.
>
> makedumjpfile Kernel map-size (KB) Filter pages (s) Copy data (s) Total (s)
> 1.5.1 3.7.0-0.36.el7.x86_64 N/A 940.28 1269.25 2209.53
> 1.5.3 3.7.0-0.36.el7.x86_64 N/A 380.09 992.77 1372.86
> 1.5.3 v3.9-rc3 N/A 197.77 892.27 1090.04
> 1.5.3+mmap v3.9-rc3+mmap 0 164.87 606.06 770.93
> 1.5.3+mmap v3.9-rc3+mmap 4 88.62 576.07 664.69
> 1.5.3+mmap v3.9-rc3+mmap 1024 83.66 477.23 560.89
> 1.5.3+mmap v3.9-rc3+mmap 2048 83.44 477.21 560.65
> 1.5.3+mmap v3.9-rc3+mmap 10240 83.84 476.56 560.4

I have also tested the makedumpfile mmap patch on a machine with 2TB memory,
here are the results:
Test environment:
Machine: SGI UV1000 with 2TB RAM.
CPU: Intel(R) Xeon(R) CPU E7- 8837 @ 2.67GHz
(only 1 cpu was enabled in the 2nd kernel)
Kernel: 3.0.13 with mmap kernel patch v3 (I had to tweak the patch a bit)
vmcore size: 2.0TB
Dump file size: 3.6GB
makedumpfile mmap branch with parameters: -c --message-level 23 -d 31
--map-size <map-size>
All measured times are actual clock times.
All tests are noncyclic. Crash kernel memory: crashkernel=512M

As did Jingbai Ma, I also tested with an unpatched kernel and
makedumpfile 1.5.1 and 1.5.3. But they do 2 filtering scans: unnecessary
pages and free pages; here added together as filter pages time.

Filter Copy
makedumpfile Kernel map-size(KB) pages(s) data(s) Total(s)
1.5.1 3.0.13 N/A 671 511 1182
1.5.3 3.0.13 N/A 294 535 829
1.5.3+mmap 3.0.13+mmap 0 54 506 560
1.5.3+mmap 3.0.13+mmap 4096 40 416 456
1.5.3+mmap 3.0.13+mmap 10240 37 424 461

Using mmap for the copy data as well as for filtering pages did little:
1.5.3+mmap 3.0.13+mmap 4096 37 414 451

My results are quite similar to Jingbai Ma's.
The mmap patch to the kernel greatly speeds the filtering of pages, so
we at SGI would very much like to see this patch in the 3.10 kernel.
http://marc.info/?l=linux-kernel&m=136627770125345&w=2

What puzzles me is that the patch greatly speeds the read's of /proc/vmcore
(where map-size is 0) as well as providing the mmap ability. I can now
seek/read page structures almost as fast as mmap'ing and copying them.
(versus Jingbai Ma's results where mmap almost doubled the speed of reads)
I have put counters in to verify, and we are doing several million
seek/read's vs. a few thousand mmap's. Yet the performance is similar
(54sec vs. 37sec, above). I can't rationalize that much improvement.

Thanks,
Cliff Wickman


\
 
 \ /
  Last update: 2013-05-03 21:41    [W:1.624 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site