lkml.org 
[lkml]   [2013]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] PCI: Make sure VF's driver get attached after PF's
On 05/14/2013 05:39 PM, Alexander Duyck wrote:
> On 05/14/2013 12:59 PM, Yinghai Lu wrote:
>> On Tue, May 14, 2013 at 12:45 PM, Alexander Duyck
>> <alexander.h.duyck@intel.com> wrote:
>>> On 05/14/2013 11:44 AM, Yinghai Lu wrote:
>>>> On Tue, May 14, 2013 at 9:00 AM, Alexander Duyck
>>>> <alexander.h.duyck@intel.com> wrote:
>>>>> I'm sorry, but what is the point of this patch? With device assignment
>>>>> it is always possible to have VFs loaded and the PF driver unloaded
>>>>> since you cannot remove the VFs if they are assigned to a VM.
>>>> unload PF driver will not call pci_disable_sriov?
>>> You cannot call pci_disable_sriov because you will panic all of the
>>> guests that have devices assigned.
>> ixgbe_remove did call pci_disable_sriov...
>>
>> for guest panic, that is another problem.
>> just like you pci passthrough with real pci device and hotremove the
>> card in host.
>>
>> ...
>
> I suggest you take another look. In ixgbe_disable_sriov, which is the
> function that is called we do a check for assigned VFs. If they are
> assigned then we do not call pci_disable_sriov.
>
>>
>>> So how does your patch actually fix this problem? It seems like it is
>>> just avoiding it.
>> yes, until the first one is done.
>
> Avoiding the issue doesn't fix the underlying problem and instead you
> are likely just introducing more bugs as a result.
>
>>> From what I can tell your problem is originating in pci_call_probe. I
>>> believe it is calling work_on_cpu and that doesn't seem correct since
>>> the work should be taking place on a CPU already local to the PF. You
>>> might want to look there to see why you are trying to schedule work on a
>>> CPU which should be perfectly fine for you to already be doing your work on.
>> it always try to go with local cpu with same pxm.
>
> The problem is we really shouldn't be calling work_for_cpu in this case
> since we are already on the correct CPU. What probably should be
> happening is that pci_call_probe should be doing a check to see if the
> current CPU is already contained within the device node map and if so
> just call local_pci_probe directly. That way you can avoid deadlocking
> the system by trying to flush the CPU queue of the CPU you are currently on.
>
That's the patch that Michael Tsirkin posted for a fix,
but it was noted that if you have the case where the _same_ driver is used for vf & pf,
other deadlocks may occur.
It would work in the case of ixgbe/ixgbevf, but not for something like
the Mellanox pf/vf driver (which is the same).

>
> Alex
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html



\
 
 \ /
  Last update: 2013-05-22 01:01    [W:0.131 / U:2.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site