lkml.org 
[lkml]   [2013]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/4] arm: omap: Add phy binding info for musb in plat data
Date
In order for controllers to get PHY in case of non dt boot, the phy
binding information (phy label) should be added in the platform
data of the controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/mach-omap2/usb-musb.c | 6 +++++-
include/linux/usb/musb.h | 3 +++
2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 3242a55..5ddbe39 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,8 +85,12 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;

- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx()) {
musb_plat.has_mailbox = true;
+ musb_plat.phy_name = "omap-usb2";
+ } else if (cpu_is_omap34xx()) {
+ musb_plat.phy_name = "twl4030";
+ }

if (soc_is_am35xx()) {
oh_name = "am35x_otg_hs";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..c05d46d 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -104,6 +104,9 @@ struct musb_hdrc_platform_data {
/* for clk_get() */
const char *clock;

+ /* phy device label */
+ const char *phy_name;
+
/* (HOST or OTG) switch VBUS on/off */
int (*set_vbus)(struct device *dev, int is_on);

--
1.7.10.4


\
 
 \ /
  Last update: 2013-05-17 16:01    [W:0.920 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site