lkml.org 
[lkml]   [2013]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v6 05/10] mtd: get the ECC info from the Extended Parameter Page
    Date
    Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page
    to store the ECC info.

    The onfi spec tells us that if the nand chip's recommended ECC codeword
    size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then
    read the Extended ECC information that is part of the extended parameter
    page to retrieve the ECC requirements for this device.

    This patch implement the reading of the Extended Parameter Page, and parses
    the sections for ECC type, and get the ECC info from the ECC section.

    Tested this patch with Micron MT29F64G08CBABAWP.

    Acked-by: Pekon Gupta <pekon@ti.com>
    Signed-off-by: Huang Shijie <b32955@freescale.com>
    ---
    drivers/mtd/nand/nand_base.c | 80 ++++++++++++++++++++++++++++++++++++++++++
    1 files changed, 80 insertions(+), 0 deletions(-)

    diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
    index b63b731..0b1162a 100644
    --- a/drivers/mtd/nand/nand_base.c
    +++ b/drivers/mtd/nand/nand_base.c
    @@ -2835,6 +2835,71 @@ static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
    return crc;
    }

    +/* Parse the Extended Parameter Page. */
    +static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
    + struct nand_chip *chip, struct nand_onfi_params *p)
    +{
    + struct onfi_ext_param_page *ep;
    + struct onfi_ext_section *s;
    + struct onfi_ext_ecc_info *ecc;
    + uint8_t *cursor;
    + int len;
    + int ret;
    + int i;
    +
    + len = le16_to_cpu(p->ext_param_page_length) * 16;
    + ep = kmalloc(len, GFP_KERNEL);
    + if (!ep) {
    + ret = -ENOMEM;
    + goto ext_out;
    + }
    +
    + /* Send our own NAND_CMD_PARAM. */
    + chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
    +
    + /* Use the Change Read Column command to skip the ONFI param pages. */
    + chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
    + sizeof(*p) * p->num_of_param_pages , -1);
    +
    + /* Read out the Extended Parameter Page. */
    + chip->read_buf(mtd, (uint8_t *)ep, len);
    + if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
    + != le16_to_cpu(ep->crc)) || strncmp(ep->sig, "EPPS", 4)) {
    + pr_debug("fail in the CRC.\n");
    + ret = -EINVAL;
    + goto ext_out;
    + }
    +
    + /* find the ECC section. */
    + cursor = (uint8_t *)(ep + 1);
    + for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
    + s = ep->sections + i;
    + if (s->type == ONFI_SECTION_TYPE_2)
    + break;
    + cursor += s->length * 16;
    + }
    + if (i == ONFI_EXT_SECTION_MAX) {
    + pr_debug("We can not find the ECC section.\n");
    + ret = -EINVAL;
    + goto ext_out;
    + }
    +
    + /* get the info we want. */
    + ecc = (struct onfi_ext_ecc_info *)cursor;
    +
    + if (ecc->codeword_size) {
    + chip->ecc_strength_ds = ecc->ecc_bits;
    + chip->ecc_step_ds = 1 << ecc->codeword_size;
    + }
    +
    + pr_info("ONFI extended param page detected.\n");
    + return 0;
    +
    +ext_out:
    + kfree(ep);
    + return ret;
    +}
    +
    /*
    * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
    */
    @@ -2903,6 +2968,21 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
    if (p->ecc_bits != 0xff) {
    chip->ecc_strength_ds = p->ecc_bits;
    chip->ecc_step_ds = 512;
    + } else if (chip->onfi_version >= 21 &&
    + (onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
    +
    + /*
    + * The nand_flash_detect_ext_param_page() uses the
    + * Change Read Column command which maybe not supported
    + * by the chip->cmdfunc. So try to update the chip->cmdfunc
    + * now. We do not replace user supplied command function.
    + */
    + if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
    + chip->cmdfunc = nand_command_lp;
    +
    + /* The Extended Parameter Page is supported since ONFI 2.1. */
    + if (nand_flash_detect_ext_param_page(mtd, chip, p))
    + pr_info("Failed to detect the extended param page.\n");
    }

    pr_info("ONFI flash detected\n");
    --
    1.7.1



    \
     
     \ /
      Last update: 2013-05-17 06:21    [W:4.230 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site