lkml.org 
[lkml]   [2013]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] clk: Fix race condition between clk_set_parent and clk_enable()
Date
Quoting Saravana Kannan (2013-05-15 21:07:24)
> Without this patch, the following race condition is possible.
> * clk-A has two parents - clk-X and clk-Y.
> * All three are disabled and clk-X is current parent.
> * Thread A: clk_set_parent(clk-A, clk-Y).
> * Thread A: <snip execution flow>
> * Thread A: Grabs enable lock.
> * Thread A: Sees enable count of clk-A is 0, so doesn't enable clk-Y.
> * Thread A: Updates clk-A SW parent to clk-Y
> * Thread A: Releases enable lock.
> * Thread B: clk_enable(clk-A).
> * Thread B: clk_enable() enables clk-Y, then enabled clk-A and returns.
>
> clk-A is now enabled in software, but not clocking in hardware since the
> hardware parent is still clk-X.
>
> The only way to avoid race conditions between clk_set_parent() and
> clk_enable/disable() is to ensure that clk_enable/disable() calls don't
> require changes to hardware enable state between changes to software clock
> topology and hardware clock topology.
>
> The options to achieve the above are:
> 1. Grab the enable lock before changing software/hardware topology and
> release it afterwards.
> 2. Keep the clock enabled for the duration of software/hardware topology
> change so that any additional enable/disable calls don't try to change
> the hardware state. Once the topology change is complete, the clock can
> be put back in its original enable state.
>
> Option (1) is not an acceptable solution since the set_parent() ops might
> need to sleep.
>
> Therefore, this patch implements option (2).
>
> This patch doesn't violate any API semantics. clk_disable() doesn't
> guarantee that the clock is actually disabled. So, no clients of a clock
> can assume that a clock is disabled after their last call to clk_disable().
> So, enabling the clock during a parent change is not a violation of any API
> semantics.
>
> This also has the nice side effect of simplifying the error handling code.
>
> Signed-off-by: Saravana Kannan <skannan@codeaurora.org>

Updated to this version in clk-next.

Thanks,
Mike

> ---
> drivers/clk/clk.c | 91 ++++++++++++++++++++++++++---------------------------
> 1 files changed, 45 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index 934cfd1..b4dbb8c 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1377,67 +1377,61 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
> unsigned long flags;
> int ret = 0;
> struct clk *old_parent = clk->parent;
> - bool migrated_enable = false;
>
> - /* migrate prepare */
> - if (clk->prepare_count)
> + /*
> + * Migrate prepare state between parents and prevent race with
> + * clk_enable().
> + *
> + * If the clock is not prepared, then a race with
> + * clk_enable/disable() is impossible since we already have the
> + * prepare lock (future calls to clk_enable() need to be preceded by
> + * a clk_prepare()).
> + *
> + * If the clock is prepared, migrate the prepared state to the new
> + * parent and also protect against a race with clk_enable() by
> + * forcing the clock and the new parent on. This ensures that all
> + * future calls to clk_enable() are practically NOPs with respect to
> + * hardware and software states.
> + *
> + * See also: Comment for clk_set_parent() below.
> + */
> + if (clk->prepare_count) {
> __clk_prepare(parent);
> -
> - flags = clk_enable_lock();
> -
> - /* migrate enable */
> - if (clk->enable_count) {
> - __clk_enable(parent);
> - migrated_enable = true;
> + clk_enable(parent);
> + clk_enable(clk);
> }
>
> /* update the clk tree topology */
> + flags = clk_enable_lock();
> clk_reparent(clk, parent);
> -
> clk_enable_unlock(flags);
>
> /* change clock input source */
> if (parent && clk->ops->set_parent)
> ret = clk->ops->set_parent(clk->hw, p_index);
> -
> if (ret) {
> - /*
> - * The error handling is tricky due to that we need to release
> - * the spinlock while issuing the .set_parent callback. This
> - * means the new parent might have been enabled/disabled in
> - * between, which must be considered when doing rollback.
> - */
> - flags = clk_enable_lock();
>
> + flags = clk_enable_lock();
> clk_reparent(clk, old_parent);
> -
> - if (migrated_enable && clk->enable_count) {
> - __clk_disable(parent);
> - } else if (migrated_enable && (clk->enable_count == 0)) {
> - __clk_disable(old_parent);
> - } else if (!migrated_enable && clk->enable_count) {
> - __clk_disable(parent);
> - __clk_enable(old_parent);
> - }
> -
> clk_enable_unlock(flags);
>
> - if (clk->prepare_count)
> + if (clk->prepare_count) {
> + clk_disable(clk);
> + clk_disable(parent);
> __clk_unprepare(parent);
> -
> + }
> return ret;
> }
>
> - /* clean up enable for old parent if migration was done */
> - if (migrated_enable) {
> - flags = clk_enable_lock();
> - __clk_disable(old_parent);
> - clk_enable_unlock(flags);
> - }
> -
> - /* clean up prepare for old parent if migration was done */
> - if (clk->prepare_count)
> + /*
> + * Finish the migration of prepare state and undo the changes done
> + * for preventing a race with clk_enable().
> + */
> + if (clk->prepare_count) {
> + clk_disable(clk);
> + clk_disable(old_parent);
> __clk_unprepare(old_parent);
> + }
>
> /* update debugfs with new clk tree topology */
> clk_debug_reparent(clk, parent);
> @@ -1449,12 +1443,17 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
> * @clk: the mux clk whose input we are switching
> * @parent: the new input to clk
> *
> - * Re-parent clk to use parent as it's new input source. If clk has the
> - * CLK_SET_PARENT_GATE flag set then clk must be gated for this
> - * operation to succeed. After successfully changing clk's parent
> - * clk_set_parent will update the clk topology, sysfs topology and
> - * propagate rate recalculation via __clk_recalc_rates. Returns 0 on
> - * success, -EERROR otherwise.
> + * Re-parent clk to use parent as its new input source. If clk is in
> + * prepared state, the clk will get enabled for the duration of this call. If
> + * that's not acceptable for a specific clk (Eg: the consumer can't handle
> + * that, the reparenting is glitchy in hardware, etc), use the
> + * CLK_SET_PARENT_GATE flag to allow reparenting only when clk is unprepared.
> + *
> + * After successfully changing clk's parent clk_set_parent will update the
> + * clk topology, sysfs topology and propagate rate recalculation via
> + * __clk_recalc_rates.
> + *
> + * Returns 0 on success, -EERROR otherwise.
> */
> int clk_set_parent(struct clk *clk, struct clk *parent)
> {
> --
> 1.7.8.3
>
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation


\
 
 \ /
  Last update: 2013-05-16 23:21    [W:1.211 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site