lkml.org 
[lkml]   [2013]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/2] ARM: mmc: bcm281xx SDHCI driver (dt mods)
Date
Add SDHCI driver for the Broadcom 281xx SoCs. Also
add bindings for it into bcm281xx dts files.

Changes from V1:
- split original patch into 2, one for driver and this one for dt

Signed-off-by: Christian Daudt <csd@broadcom.com>

diff --git a/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt
new file mode 100644
index 0000000..ad1c4bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt
@@ -0,0 +1,16 @@
+Broadcom BCM281xx SDHCI driver
+
+This file documents differences between the core properties in mmc.txt
+and the properties in the bcm281xx driver.
+
+Required properties:
+- compatible : Should be "bcm,kona-sdhci"
+
+Example:
+
+sdio2: sdio@0x3f1a0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ interrupts = <0x0 74 0x4>;
+};
+
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 248067c..9ae3404 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -27,4 +27,21 @@
status = "okay";
};

+ sdio0: sdio@0x3f180000 {
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+ sdio1: sdio@0x3f190000 {
+ non-removable;
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+ sdio3: sdio@0x3f1b0000 {
+ max-frequency = <48000000>;
+ status = "okay";
+ };
+
+
};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index ad13588..6606b41 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -47,4 +47,33 @@
cache-unified;
cache-level = <2>;
};
+
+ sdio0: sdio@0x3f180000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f180000 0x10000>;
+ interrupts = <0x0 77 0x4>;
+ status = "disabled";
+ };
+
+ sdio1: sdio@0x3f190000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f190000 0x10000>;
+ interrupts = <0x0 76 0x4>;
+ status = "disabled";
+ };
+
+ sdio2: sdio@0x3f1a0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1a0000 0x10000>;
+ interrupts = <0x0 74 0x4>;
+ status = "disabled";
+ };
+
+ sdio3: sdio@0x3f1b0000 {
+ compatible = "bcm,kona-sdhci";
+ reg = <0x3f1b0000 0x10000>;
+ interrupts = <0x0 73 0x4>;
+ status = "disabled";
+ };
+
};
--
1.7.10.4



\
 
 \ /
  Last update: 2013-05-10 18:41    [W:0.074 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site