lkml.org 
[lkml]   [2013]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V3 10/21] thermal: exynos: Fix to clear only the generated interrupts
On 09-05-2013 22:22, amit daniel kachhap wrote:
> Hi,
>
> On Thu, May 9, 2013 at 8:03 PM, Eduardo Valentin
> <eduardo.valentin@ti.com> wrote:
>> On 07-05-2013 09:01, Amit Daniel Kachhap wrote:
>>> This patch uses the TMU status register to know the generated interrupts
>>> and only clear them in the interrupt handler.
>>>
>>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>> ---
>>> drivers/thermal/samsung/exynos_tmu.c | 10 ++++------
>>> drivers/thermal/samsung/exynos_tmu_data.c | 2 ++
>>> 2 files changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>> index 97b87aa..082d5a2 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> @@ -325,17 +325,15 @@ static void exynos_tmu_work(struct work_struct *work)
>>> struct exynos_tmu_data, irq_work);
>>> struct exynos_tmu_platform_data *pdata = data->pdata;
>>> struct exynos_tmu_registers *reg = pdata->registers;
>>> + unsigned int val_irq;
>>>
>>> exynos_report_trigger();
>>> mutex_lock(&data->lock);
>>> clk_enable(data->clk);
>>>
>>> - if (data->soc == SOC_ARCH_EXYNOS)
>>> - writel((reg->inten_rise_mask << reg->inten_rise_shift) |
>>> - (reg->inten_fall_mask << reg->inten_fall_shift),
>>> - data->base + reg->tmu_intclear);
>>> - else
>>> - writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
>>> + val_irq = readl(data->base + reg->tmu_intstat);
>>> + /* clear the interrupts */
>>> + writel(val_irq, data->base + reg->tmu_intclear);
>>>
>>
>> hmmm.. Don t you need to act accordingly depending on what is in your
>> int status?
>
> Earlier also it is done like this way. Basically core thermal layer
> checks temp for each trip so even if I check for which threshold
> interrupt is raised it is of no use. Anyway this is a TODO for me.
>

Please add a /* TODO: */ entry then.

> Thanks,
> Amit Daniel
>>
>>> clk_disable(data->clk);
>>> mutex_unlock(&data->lock);
>>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>>> index 3a1ded1..7322597 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>>> @@ -45,6 +45,7 @@ static struct exynos_tmu_registers exynos4210_tmu_registers = {
>>> .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
>>> .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
>>> .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
>>> + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>>> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>>> };
>>> struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
>>> @@ -111,6 +112,7 @@ static struct exynos_tmu_registers exynos5250_tmu_registers = {
>>> .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
>>> .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
>>> .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
>>> + .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
>>> .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
>>> .emul_con = EXYNOS_EMUL_CON,
>>> .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
>>>
>>
>>
>
>


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-05-10 18:21    [W:0.097 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site