lkml.org 
[lkml]   [2013]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 0/9] TPU PWM support
Date
Hi Simon,

On Thursday 25 April 2013 09:54:02 Simon Horman wrote:
> On Wed, Apr 24, 2013 at 04:40:44PM +0900, Simon Horman wrote:
> > On Wed, Apr 24, 2013 at 02:06:00AM +0200, Laurent Pinchart wrote:
> > > Hello,
> > >
> > > This patch set adds support for the TPU PWM unit found in the sh73a0 and
> > > r8a7740 SoCs. It deprecates and removes the leds-renesas-tpu driver in
> > > favor of a combination of leds-pwm and pwm-rmob.
> > >
> > > I've tested the code on Armadillo only as I don't have access to a kota2
> > > board. This is why I've added backlight support to Armadillo as part of
> > > this set.
> > >
> > > As an added bonus patches 7/9 and 8/9 remove function GPIOs support from
> > > the sh73a0 platform. Along with the other PFC-related patches recently
> > > posted on the list, mach-shmobile is now free of function GPIOs. Any
> > > volunteer to migrate arch/sh ? :-)
> > >
> > > The patches are based on a merge of "[PATCH 00/37] Fully migrate r8a7740
> > > to pinctrl", "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI power
> > > gate as a regulator" and "[PATCH] sh-pfc: r8a7740: Add bias (pull-
> > > up/down) pinconf support".
> > >
> > > Laurent Pinchart (9):
> > > sh-pfc: sh73a0: Add TPU pin groups and functions
> > > sh-pfc: r8a7740: Add TPU pin groups and functions
> > > pwm: Add Renesas Mobile TPU PWM driver
> > > ARM: mach-shmobile: clock-r8a7740: add TPU PWM support
> > > ARM: mach-shmobile: armadillo800eva: Add backlight support
> > > ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob
> > > sh-pfc: sh73a0: Remove function GPIOs
> > > ARM: shmobile: sh73a0: Remove all GPIOs
> > > leds: Remove leds-renesas-tpu driver
> > >
> > > arch/arm/mach-shmobile/board-armadillo800eva.c | 51 ++-
> > > arch/arm/mach-shmobile/board-kota2.c | 178 +++++---
> > > arch/arm/mach-shmobile/clock-r8a7740.c | 4 +-
> > > arch/arm/mach-shmobile/clock-sh73a0.c | 8 +-
> > > arch/arm/mach-shmobile/include/mach/sh73a0.h | 373 +--------------
> > > drivers/leds/Kconfig | 12 -
> > > drivers/leds/Makefile | 1 -
> > > drivers/leds/leds-renesas-tpu.c | 336 --------------
> > > drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 50 ++
> > > drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 608 +++++++----------
> > > drivers/pwm/Kconfig | 7 +
> > > drivers/pwm/Makefile | 1 +
> > > drivers/pwm/pwm-rmob.c | 462 ++++++++++++++++++
> > > include/linux/platform_data/leds-renesas-tpu.h | 14 -
> > > include/linux/platform_data/pwm-rmob.h | 18 +
> > > 15 files changed, 913 insertions(+), 1210 deletions(-)
> > > delete mode 100644 drivers/leds/leds-renesas-tpu.c
> > > create mode 100644 drivers/pwm/pwm-rmob.c
> > > delete mode 100644 include/linux/platform_data/leds-renesas-tpu.h
> > > create mode 100644 include/linux/platform_data/pwm-rmob.h
> >
> > I have rebased the pinmux branch on renesas-boards3-for-v3.10 to
> > supply dependencies. That tag includes the renesas-pinmux2-for-v3.10
> > tag which the pinmux branch was previously based on.
> >
> > I have applied this entire series on the resulting pinmux branch.
> >
> > I plan to push this when I tag renesas-next-20130424 later today.
> > If not I will tag and push renesas-next-20130425 tomorrow.
>
> As there has been subsequent discussion and a v2 of this series posted, and
> I have dropped the "[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI
> power gate as a regulator" series for similar reasons; I have dropped these
> patches for now.

I'll wait for Magnus' ack and I'll then ask you to apply the patches.

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2013-04-25 13:01    [W:0.104 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site