Messages in this thread | | | Date | Tue, 23 Apr 2013 12:13:33 +0200 | From | Alexander Holler <> | Subject | Re: [PATCH 3/3] rtc: rtc-hid-sensor-time; add option hctosys to set time at boot |
| |
Am 23.04.2013 12:08, schrieb Alexander Holler: > Am 23.04.2013 10:51, schrieb Alexander Holler: >> Am 23.04.2013 01:38, schrieb Andrew Morton: >>> On Fri, 19 Apr 2013 17:14:12 +0200 Alexander Holler >>> <holler@ahsoftware.de> wrote: >>> >>>> drivers/rtc/hctosys (CONFIG_RTC_HCTOSYS) doesn't work for >>>> rtc-hid-sensor-time because it will be called in late_init, and thus >>>> before >>>> rtc-hid-sensor-time gets loaded. >>> >>> Isn't that true of all RTC drivers which are built as modules? There's >>> nothing special about hid-sensor-time here? >>> >>> I assume the standard answer here is "your RTC driver should be built >>> into vmlinux". If we wish to make things work for modular RTC drivers >>> then we should find a solution which addresses *all* RTC drivers? >> >> No. I having rtc-hid-sensor-time, hid-sensor-hub (and USB) statically >> linked in doesn't help. Here is what happens here with such an >> configuration: >> >> -- >> [ 7.638970] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) >> [ 7.645639] Waiting 180sec before mounting root device... >> [ 16.598759] HID-SENSOR-2000a0 HID-SENSOR-2000a0.0: rtc core: >> registered hid-sensor-time as rtc0 >> [ 16.608712] HID-SENSOR-2000a0 HID-SENSOR-2000a0.0: hctosys: setting >> system clock to 2013-04-19 16:45:06 UTC (1366389906) >> -- >> >> I havent't looked in detail at why rtc-hid-sensor-time gets loaded that >> late, but I assume it's because the USB stack (and/or the device or the >> communication inbetween) needs some time (and I assume that's why >> rootwait and rootdelay got invented too). >> >>> >>>> To set the time through rtc-hid-sensor-time >>>> at startup, the module now checks by default if the system time is >>>> before >>>> 1970-01-02 and sets the system time (once) if this is the case. >>>> >>>> To disable this behaviour, set the module option hctosys to zero, >>>> e.g. by >>>> using rtc-hid-sensor-time.hctosys=0 at the kernel command line if the >>>> driver is statically linked into the kernel. >>> >>> Is a bit hacky, no? >> >> I didn't have any other idea to prevent an USB (or any other >> hot-pluggable HID) device to change the time while still beeing able (by >> default) to set the time by such an device at boot. But I'm open to >> suggestions. (E.g. one of the scenarios I want to prevent is, that a >> computer gets it's time by NTP and someone is able to change the time >> later on by simply plugging in some HID device.) >> > > To add something more: I use the system time as a bool > "time_was_set_once" and have choosen one day just in case something > needs really long to boot (e.g. because of some lengthy fsck or whatever > else). > > A solution to both problems might be to change the logic for hctosys > completly to read the time when the first RTC device appears (or when > the device mentioned in CONFIG_RTC_HCTOSYS_DEVICE appears). But that > would require a change to hctosys or the RTC subsystem, which would > involve more patches and discussion. As rtc-hid-sensor-time currently > seems to be the only RTC with the above problems, I've gone the easy > route and only modified this driver.
Oh, damn. I've forgotten my example above with NTP. In that case setting the time when the first RTC appears doesn't work.
Regards,
Alexander
| |