lkml.org 
[lkml]   [2013]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [5/9] thermal: exynos: Make the zone handling dependent on trip count
On 12-04-2013 07:16, amit daniel kachhap wrote:
> Hi Eduardo,
>
> On Fri, Apr 12, 2013 at 2:18 AM, Eduardo Valentin
> <eduardo.valentin@ti.com> wrote:
>> On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
>>>
>>> This code changes the zone handling to use the trip count passed
>>> by the TMU driver. This also helps in adding more zone support.
>>>
>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
>>>
>>> ---
>>> drivers/thermal/samsung/exynos_common.c | 56
>>> +++++++++++++------------
>>> drivers/thermal/samsung/exynos_common.h | 13 +++---
>>> include/linux/platform_data/exynos_thermal.h | 7 ++-
>>> 3 files changed, 40 insertions(+), 36 deletions(-)
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_common.c
>>> b/drivers/thermal/samsung/exynos_common.c
>>> index 649d67c..0c0098d 100644
>>> --- a/drivers/thermal/samsung/exynos_common.c
>>> +++ b/drivers/thermal/samsung/exynos_common.c
>>> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device
>>> *thermal,
>>> static int exynos_get_trip_type(struct thermal_zone_device *thermal, int
>>> trip,
>>> enum thermal_trip_type *type)
>>> {
>>> - switch (GET_ZONE(trip)) {
>>> - case MONITOR_ZONE:
>>> - case WARN_ZONE:
>>> - *type = THERMAL_TRIP_ACTIVE;
>>> - break;
>>> - case PANIC_ZONE:
>>> - *type = THERMAL_TRIP_CRITICAL;
>>> - break;
>>> - default:
>>> + struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>> +
>>> + if (trip < 0 || trip >= max_trip)
>>> return -EINVAL;
>>> - }
>>> + else if (trip == (max_trip - 1))
>>> + *type = THERMAL_TRIP_CRITICAL;
>>> + else
>>> + *type = THERMAL_TRIP_ACTIVE;
>>> +
>>> return 0;
>>> }
>>>
>>> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct
>>> thermal_zone_device *thermal, int trip,
>>> unsigned long *temp)
>>> {
>>> struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>>
>>> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
>>> + if (trip < 0 || trip >= max_trip)
>>> return -EINVAL;
>>>
>>> *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
>>> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct
>>> thermal_zone_device *thermal, int trip,
>>> static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
>>> unsigned long *temp)
>>> {
>>> - int ret;
>>> - /* Panic zone */
>>> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
>>> - return ret;
>>> + struct exynos_thermal_zone *th_zone = thermal->devdata;
>>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count;
>>> + /* Get the temp of highest trip*/
>>> + return exynos_get_trip_temp(thermal, max_trip - 1, temp);
>>> }
>>>
>>> int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
>>> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device
>>> *thermal,
>>> tab_size = data->cooling_data.freq_clip_count;
>>>
>>> if (tab_ptr == NULL || tab_size == 0)
>>> - return -EINVAL;
>>> + return 0;
>>>
>>> /* find the cooling device registered*/
>>> for (i = 0; i < th_zone->cool_dev_size; i++)
>>> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device
>>> *thermal,
>>> tab_size = data->cooling_data.freq_clip_count;
>>>
>>> if (tab_size == 0)
>>> - return -EINVAL;
>>> + return 0;
>>>
>>> /* find the cooling device registered*/
>>> for (i = 0; i < th_zone->cool_dev_size; i++)
>>
>>
>> The above two chunks are confusing. I dont understand how they are now
>> supposed to be valid settings.
> Well it is made valid when there is no cooling table registered and
> hence no cooling.

I suppose that is the case when you have sensors covering domains
different of your CPU domain, where you cool off using cpufreq (table),
right?

I suggest you adding a comment explaining why this is now valid..


>>
>>
>>> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct
>>> thermal_sensor_conf *sensor_conf)
>>> return -ENOMEM;
>>>
>>> th_zone->sensor_conf = sensor_conf;
>>> - cpumask_set_cpu(0, &mask_val);
>>> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
>>> - if (IS_ERR(th_zone->cool_dev[0])) {
>>> - pr_err("Failed to register cpufreq cooling device\n");
>>> - ret = -EINVAL;
>>> - goto err_unregister;
>>> + if (sensor_conf->cooling_data.freq_clip_count > 0) {
>>> + cpumask_set_cpu(0, &mask_val);
>>> + th_zone->cool_dev[0] =
>>> cpufreq_cooling_register(&mask_val);
>>> + if (IS_ERR(th_zone->cool_dev[0])) {
>>> + pr_err("Failed to register cpufreq cooling
>>> device\n");
>>> + ret = -EINVAL;
>>> + goto err_unregister;
>>> + }
>>> + th_zone->cool_dev_size++;
>>> }
>>> - th_zone->cool_dev_size++;
>>>
>>> th_zone->therm_dev =
>>> thermal_zone_device_register(sensor_conf->name,
>>> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops,
>>> NULL, 0,
>>> - sensor_conf->trip_data.trigger_falling ?
>>> - 0 : IDLE_INTERVAL);
>>> + sensor_conf->trip_data.trip_count, 0, th_zone,
>>> &exynos_dev_ops,
>>> + NULL, 0, sensor_conf->trip_data.trigger_falling ?
>>> + 0 : IDLE_INTERVAL);
>>>
>>> if (IS_ERR(th_zone->therm_dev)) {
>>> pr_err("Failed to register thermal zone device\n");
>>> diff --git a/drivers/thermal/samsung/exynos_common.h
>>> b/drivers/thermal/samsung/exynos_common.h
>>> index b8d289e..453e09a 100644
>>> --- a/drivers/thermal/samsung/exynos_common.h
>>> +++ b/drivers/thermal/samsung/exynos_common.h
>>> @@ -27,23 +27,22 @@
>>> #define SENSOR_NAME_LEN 16
>>> #define MAX_TRIP_COUNT 8
>>> #define MAX_COOLING_DEVICE 4
>>> -#define MAX_THRESHOLD_LEVS 4
>>> +#define MAX_THRESHOLD_LEVS 5
>>>
>>> #define ACTIVE_INTERVAL 500
>>> #define IDLE_INTERVAL 10000
>>> #define MCELSIUS 1000
>>>
>>> /* CPU Zone information */
>>> -#define PANIC_ZONE 4
>>> -#define WARN_ZONE 3
>>> -#define MONITOR_ZONE 2
>>> -#define SAFE_ZONE 1
>>> +#define PANIC_ZONE 5
>>> +#define ALARM_ZONE 4
>>> +#define WARN_ZONE 3
>>> +#define MONITOR_ZONE 2
>>> +#define SAFE_ZONE 1
>>>
>>
>>
>> Updating this does not seam to be part of the intent of this patch. You
>> probably want to send a separate patch for this.
> yes right.
>>
>>
>>> #define GET_ZONE(trip) (trip + 2)
>>> #define GET_TRIP(zone) (zone - 2)
>>>
>>> -#define EXYNOS_ZONE_COUNT 3
>>> -
>>> struct thermal_trip_point_conf {
>>> int trip_val[MAX_TRIP_COUNT];
>>> int trip_count;
>>> diff --git a/include/linux/platform_data/exynos_thermal.h
>>> b/include/linux/platform_data/exynos_thermal.h
>>> index da7e627..893b758 100644
>>> --- a/include/linux/platform_data/exynos_thermal.h
>>> +++ b/include/linux/platform_data/exynos_thermal.h
>>> @@ -23,6 +23,8 @@
>>> #define _LINUX_EXYNOS_THERMAL_H
>>> #include <linux/cpu_cooling.h>
>>>
>>> +#define MAX_TRIP 5
>>> +
>>
>>
>>
>> Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same
> Yes they can be removed.
>>
>>
>>> enum calibration_type {
>>> TYPE_ONE_POINT_TRIMMING,
>>> TYPE_TWO_POINT_TRIMMING,
>>> @@ -100,11 +102,12 @@ struct freq_clip_table {
>>> struct exynos_tmu_platform_data {
>>> u8 threshold;
>>> u8 threshold_falling;
>>> - u8 trigger_levels[4];
>>> + u8 trigger_levels[MAX_TRIP];
>>> bool trigger_level0_en;
>>> bool trigger_level1_en;
>>> bool trigger_level2_en;
>>> bool trigger_level3_en;
>>> + bool trigger_level4_en;
>>>
>>> u8 gain;
>>> u8 reference_voltage;
>>> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data {
>>>
>>> enum calibration_type cal_type;
>>> enum soc_type type;
>>> - struct freq_clip_table freq_tab[4];
>>> + struct freq_clip_table freq_tab[MAX_TRIP];
>>> unsigned int freq_tab_count;
>>> };
>>> #endif /* _LINUX_EXYNOS_THERMAL_H */
>>>
>>
>
>



\
 
 \ /
  Last update: 2013-04-12 15:01    [W:0.076 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site