lkml.org 
[lkml]   [2013]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3.8.0-rc4+ - Oops on removing WinTV-HVR-1400 expresscard TV Tuner


On 03/07/13 17:30, Bjorn Helgaas wrote:
> On Thu, Mar 7, 2013 at 9:28 AM, Chris Clayton <chris2553@googlemail.com> wrote:
>>
>>
>> On 03/06/13 23:45, Bjorn Helgaas wrote:
>>>
>>> On Thu, Jan 31, 2013 at 5:09 AM, Chris Clayton <chris2553@googlemail.com>
>>> wrote:
>>>
>>>> My usb3 expresscard device has arrived and I get an oops with that too,
>>>> if I
>>>> remove it without unloading the driver first. I guess it shouldn't be a
>>>> surprise that the driver isn't expecting the device to disappear.
>>>>
>>>> As I mentioned, I have some trouble with the WinTV-HVR-1400 card, which
>>>> sometimes pops out again, if I push it into the slot too hard (but I'm
>>>> geeting better at that with practice). So what I've done (with the usb3
>>>> card
>>>> too) to avoid the oopsen is blacklist the driver in
>>>> /etc/modprobe.d/blacklist.conf and then load them when I'm sure the card
>>>> is
>>>> properly inserted. Not exactly hotplug, but at least I don't have to
>>>> reboot
>>>> because of an oops- and it's not something I'm doing several times an
>>>> hour.
>>>
>>>
>>> Hi Chris,
>>>
>>> What's the current state of this? It sounds to me like it still
>>> doesn't work out of the box. Having to blacklist the driver and load
>>> it manually is a completely unacceptable user experience. If you have
>>> to manually choose acpiphp over pciehp, that is also unacceptable.
>>>
>>> So if you're still limping along with hacky workarounds like this, I'd
>>> like to pursue this more and see if we can't figure out a better
>>> solution.
>>>
>>> Bjorn
>>>
>> Hi Bjorn,
>>
>> If I unblacklist the driver, insert the HVR-1400 card and then remove it, I
>> still get the oops. This is with kernel 3.8.2. I no longer get the oops with
>> the USB3 card, but I don't know how or when that was fixed.
>>
>> I stopped working on it when, after finding the workaround to the oops and
>> then spending many many hours figuring out a fix so that scandvb would find
>> some channels, no one on the linux-media list seemed interested in the fix.
>> On top of that, even though scanning now finds all the available channels,
>> the quality of the TV picture and sound is very poor indeed. I didn't want
>> to bang my head against the linux-media wall again, so I abandoned the card
>> and now use a USB TV stick, which gives is much better results than the
>> card. It's a pity because the card also supports an analog signal which
>> means I can watch the RF output from my satellite box, which I have piped
>> around the house. Anyway, the linux-media folks are not your problem and if
>> I want to watch satellite TV on my laptop, I can make one of my rare visits
>> to Windows (where the picture and sound are good).
>>
>> Having said (ranted?) all that, I would be more than happy to help fix the
>> oops. After I first reported it, I realised that I didn't have a hotplug
>> driver loaded. With help from Yijing Wang, we eventually managed to get the
>> card recognised and drivers loaded when it is inserted. That doesn't help
>> with the oops, though. I now have the pciehp driver compiled statically onto
>> the kernel (and pass pcie_ports=native to the kernel), but removing the card
>> with the cx23885 driver loaded always results in an oops. I originally
>> reported this to the linux-media list because functions from the cx23885
>> driver are at the top of the call trace, but only Martin responded with some
>> hotplug-related suggestions, which is what swung discussion the way of the
>> linux-pci list.
>
> OK. There are several potential problems here.
>
> 1) The change to make scandvb find some channels. This is probably a
> cx23885 or linux-media issue, and I can't help with that.
>
> 2) TV picture/sound quality problem. Again, probably a cx23885 driver
> issue, and I can't help with that.
>

I'm not going to use the card and I don't have the time (or patience) to
submit the change again.

> 3) HVR-1400 not being recognized when inserted. This is a PCI hotplug
> issue, and I *can* help with this. I don't know what your hardware
> is, but in general, pciehp should take care of this. If it doesn't,
> or if you have to use an argument like "pcie_ports=native", we should
> fix this.
>
> 4) Oops when removing HVR-1400 ExpressCard. From the backtrace, I
> assume the cx23885 driver is still bound to the device when you remove
> the card. It'd be nice if the driver could handle the device going
> away, but I'm not surprised that it doesn't.
>

Nor am I, but it's hardly plug and play, is it. With Windows I can plug
and unplug the card at will without crashing the system.

> If you unbind the driver before removing the card, the oops should not
> happen. You should be able to do this manually with something like
> this (with the address of your device, of course):
>
> # echo 0000:05:00.0 > /sys/bus/pci/drivers/cx23885/unbind
>
> It would also be nice if there were a good user interface for doing
> this, e.g., something like "Safely remove hardware" on Windows. But I
> don't know what it is on Linux.
>

Thanks, I'll look into that and see if I can write a little panel applet
to provide a UI.

> So 3) is the thing I might be able to help with. If there's still a
> problem here (and even having to boot with an argument is a problem),
> let's start by collecting complete dmesg logs, with and without your
> "pcie_ports" option. Boot without the card installed, then insert it
> and remove it. If you can use something like v3.9-rc1 with
> CONFIG_HOTPLUG_PCI_PCIE=y, that would be ideal.
>

OK, I've gathered these logs using a kernel built from a pull of Linus'
tree this afternoon (v3.9-rc1-108-g9f22578). Also, the cx23885 driver is
still blacklisted to avoid unnecessary noise and the chance of an oops
if the card springs out again when I insert it. The driver does load if
it's not blacklisted (and the pcie_ports=native option is present).

The two logs are attached. As you will see, nothing at all happens when
the pcie_ports=native option is absent. The nf_conntrack message is
normally the last one from a normal boot.

Chris

> Bjorn
>
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (chris@laptop) (gcc version 4.7.3 20130302 (prerelease) (GCC) ) #34 SMP PREEMPT Thu Mar 7 19:33:03 GMT 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dab0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dab0f000-0x00000000dad4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dad4f000-0x00000000dad6efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dad6f000-0x00000000daf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf1f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK AH531/FJNBB0F, BIOS 1.30 05/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01628000, 0x01628fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x379fffff]
[ 0.000000] [mem 0x34000000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 FUJ )
[ 0.000000] ACPI: XSDT daffe120 00084 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FACP daff0000 000F4 (v03 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: DSDT daff3000 0794A (v02 FUJ FJNBB0F 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS daf3d000 00040
[ 0.000000] ACPI: SLIC daffd000 00176 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SSDT daffb000 01068 (v01 FUJ PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! daff2000 000A5 (v32 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: HPET dafef000 00038 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: APIC dafee000 00098 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: MCFG dafed000 0003C (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT dafec000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT dafeb000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI dafea000 0003E (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe9000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe8000 00242 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7810MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01629000, 0x01629fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x1fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdab0efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x00000000-0x1fdfffff]
[ 0.000000] On node 0 totalpages: 2074796
[ 0.000000] free_area_init_node: node 0, pgdat c1569140, node_mem_map f37fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15621 pages used for memmap
[ 0.000000] HighMem zone: 1846546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f37bc000 s26496 r0 d22656 u49152
[ 0.000000] pcpu-alloc: s26496 r0 d22656 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2073012
[ 0.000000] Kernel command line: root=/dev/sda5 pcie_ports=native ro resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0021fe00)
[ 0.000000] Memory: 8221536k/8910848k available (4096k kernel code, 77644k reserved, 1466k data, 376k init, 7386180k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc156f000 - 0xc15cd000 ( 376 kB)
.data : 0xc1400258 - 0xc156eb80 (1466 kB)
.text : 0xc1000000 - 0xc1400258 (4096 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2494.124 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.24 BogoMIPS (lpj=9976496)
[ 0.000117] pid_max: default: 32768 minimum: 301
[ 0.000198] Mount-cache hash table entries: 512
[ 0.000430] Disabled fast string operations
[ 0.000485] CPU: Physical Processor ID: 0
[ 0.000539] CPU: Processor Core ID: 0
[ 0.000596] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000674] mce: CPU supports 7 MCE banks
[ 0.000736] CPU0: Thermal monitoring enabled (TM1)
[ 0.000800] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.001003] Freeing SMP alternatives: 16k freed
[ 0.001062] ACPI: Core revision 20130117
[ 0.005472] ACPI: All ACPI Tables successfully acquired
[ 0.005924] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.006395] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046178] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.046373] TSC deadline timer enabled
[ 0.046381] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.046613] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.046674] ... version: 3
[ 0.046728] ... bit width: 48
[ 0.046783] ... generic registers: 4
[ 0.046838] ... value mask: 0000ffffffffffff
[ 0.046895] ... max period: 000000007fffffff
[ 0.046951] ... fixed-purpose events: 3
[ 0.047006] ... event mask: 000000070000000f
[ 0.062595] CPU 1 irqstacks, hard=f30b2000 soft=f30b4000
[ 0.072953] Initializing CPU#1
[ 0.073724] Disabled fast string operations
[ 0.062595] smpboot: Booting Node 0, Processors #1
[ 0.075909] CPU 2 irqstacks, hard=f30d2000 soft=f30d4000
[ 0.086360] Initializing CPU#2
[ 0.087149] Disabled fast string operations
[ 0.076068] #2
[ 0.089325] CPU 3 irqstacks, hard=f30de000 soft=f30e8000
[ 0.089485] #3 OK
[ 0.099786] Initializing CPU#3
[ 0.100576] Disabled fast string operations
[ 0.102692] Brought up 4 CPUs
[ 0.102856] smpboot: Total of 4 processors activated (19952.99 BogoMIPS)
[ 0.105542] devtmpfs: initialized
[ 0.105801] PM: Registering ACPI NVS region [mem 0xdad4f000-0xdad6efff] (131072 bytes)
[ 0.105865] PM: Registering ACPI NVS region [mem 0xdaf1f000-0xdaf9efff] (524288 bytes)
[ 0.105992] NET: Registered protocol family 16
[ 0.106176] ACPI: bus type pci registered
[ 0.106270] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.106346] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.106405] PCI: Using MMCONFIG for extended config space
[ 0.106462] PCI: Using configuration type 1 for base access
[ 0.107558] bio: create slab <bio-0> at 0
[ 0.107658] ACPI: Added _OSI(Module Device)
[ 0.107714] ACPI: Added _OSI(Processor Device)
[ 0.107769] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.107826] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109096] ACPI: EC: Look up EC in DSDT
[ 0.110340] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122765] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.123178] ACPI: SSDT dad4d718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.123630] ACPI: Dynamic OEM Table Load:
[ 0.123764] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.134969] ACPI: SSDT daf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.135448] ACPI: Dynamic OEM Table Load:
[ 0.135581] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.146869] ACPI: SSDT dad4cd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.147313] ACPI: Dynamic OEM Table Load:
[ 0.147446] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.159408] ACPI: Interpreter enabled
[ 0.159467] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.159667] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.159823] S3 S4 S5)
[ 0.159999] ACPI: Using IOAPIC for interrupt routing
[ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.164578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.164666] \_SB_.PCI0:_OSC invalid UUID
[ 0.164666] _OSC request data:1 8 1f
[ 0.164693] \_SB_.PCI0:_OSC invalid UUID
[ 0.164694] _OSC request data:1 f 1f
[ 0.164696] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.164759] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.165277] PCI host bridge to bus 0000:00
[ 0.165334] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.165391] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.166053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.166113] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.166173] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.166239] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.166311] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.166320] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.166326] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.166330] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.166417] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.166441] pci 0000:00:16.0: reg 10: [mem 0xf1605000-0xf160500f 64bit]
[ 0.166502] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.166577] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.166598] pci 0000:00:1a.0: reg 10: [mem 0xf160a000-0xf160a3ff]
[ 0.166670] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.166705] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.166794] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.166813] pci 0000:00:1b.0: reg 10: [mem 0xf1600000-0xf1603fff 64bit]
[ 0.166867] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166917] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.167014] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.167078] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.167177] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.167216] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.167301] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.167362] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.167393] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.167482] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.167503] pci 0000:00:1d.0: reg 10: [mem 0xf1609000-0xf16093ff]
[ 0.167576] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.167607] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167694] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.167827] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.167845] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.167853] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.167861] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.167868] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.167876] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.167884] pci 0000:00:1f.2: reg 24: [mem 0xf1608000-0xf16087ff]
[ 0.167916] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.167968] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.167982] pci 0000:00:1f.3: reg 10: [mem 0xf1604000-0xf16040ff 64bit]
[ 0.168003] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.168298] pci 0000:01:00.0: [8086:008a] type 00 class 0x028000
[ 0.168462] pci 0000:01:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
[ 0.169019] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.169145] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.174954] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175018] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.175107] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.175168] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.175173] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.175181] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.175256] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.175277] pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.175311] pci 0000:07:00.0: reg 18: [mem 0xf0c04000-0xf0c04fff 64bit pref]
[ 0.175332] pci 0000:07:00.0: reg 20: [mem 0xf0c00000-0xf0c03fff 64bit pref]
[ 0.175392] pci 0000:07:00.0: supports D1 D2
[ 0.175393] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175433] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.182860] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.182947] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.182955] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.182976] pci_bus 0000:00: on NUMA node 0
[ 0.182977] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.183351] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.183929] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.184504] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.185080] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.185657] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186312] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.186970] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.187544] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.188302] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.188441] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.188483] Found 1 acpi root devices
[ 0.188511] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.188674] ACPI: No dock devices found.
[ 0.188763] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.188826] vgaarb: loaded
[ 0.188878] vgaarb: bridge control possible 0000:00:02.0
[ 0.188985] SCSI subsystem initialized
[ 0.189040] ACPI: bus type scsi registered
[ 0.189106] libata version 3.00 loaded.
[ 0.189109] ACPI: bus type usb registered
[ 0.189178] usbcore: registered new interface driver usbfs
[ 0.189244] usbcore: registered new interface driver hub
[ 0.189321] usbcore: registered new device driver usb
[ 0.189390] Linux video capture interface: v2.00
[ 0.189473] Advanced Linux Sound Architecture Driver Initialized.
[ 0.189532] PCI: Using ACPI for IRQ routing
[ 0.191220] PCI: pci_cache_line_size set to 64 bytes
[ 0.191311] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.191312] e820: reserve RAM buffer [mem 0xdab0f000-0xdbffffff]
[ 0.191314] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.191315] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.191442] Switching to clocksource hpet
[ 0.191538] pnp: PnP ACPI init
[ 0.191594] ACPI: bus type pnp registered
[ 0.191669] pnp 00:00: [dma 4]
[ 0.191683] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.191699] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.191767] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.191789] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.191819] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.191878] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.191937] system 00:04: [io 0xffff] has been reserved
[ 0.191996] system 00:04: [io 0xffff] has been reserved
[ 0.192054] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.192112] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.192171] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.192229] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.192289] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192307] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.192341] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.192401] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.192420] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.192438] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.192544] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.192604] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.192664] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.192724] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.192784] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.192844] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.192907] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.192967] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.193027] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.193088] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.193148] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193312] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.193373] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.193441] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.193476] pnp: PnP ACPI: found 11 devices
[ 0.193531] ACPI: ACPI bus type pnp unregistered
[ 0.229464] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.229528] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.229598] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.229657] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.229721] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.229785] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.229852] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.229909] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.229973] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.230160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.230162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.230163] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230165] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.230166] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.230168] pci_bus 0000:01: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.230169] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.230170] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.230172] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.230173] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.230174] pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.230197] NET: Registered protocol family 2
[ 0.230369] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.230441] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.230510] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.230580] TCP: reno registered
[ 0.230634] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230695] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.230790] NET: Registered protocol family 1
[ 0.230854] pci 0000:00:02.0: Boot video device
[ 0.231072] PCI: CLS 64 bytes, default 64
[ 0.231650] bounce pool size: 64 pages
[ 0.232791] fuse init (API version 7.21)
[ 0.232906] msgmni has been set to 1631
[ 0.233235] io scheduler noop registered
[ 0.233328] io scheduler cfq registered (default)
[ 0.233627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.233717] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 1c16 ss_vid 10cf ss_did 1610
[ 0.233823] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.233829] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.233898] intel_idle: MWAIT substates: 0x21120
[ 0.233898] intel_idle: v0.4 model 0x2A
[ 0.233899] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.234023] ACPI: AC Adapter [ACAD] (on-line)
[ 0.234195] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.234259] ACPI: Power Button [PWRB]
[ 0.234340] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.234414] ACPI: Lid Switch [LID]
[ 0.234493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.234555] ACPI: Power Button [PWRF]
[ 0.234661] ACPI: Requesting acpi_cpufreq
[ 0.236490] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.236549] ACPI: Thermal Zone [THRM] (55 C)
[ 0.236616] isapnp: Scanning for PnP cards...
[ 0.237081] ACPI: Battery Slot [BAT1] (battery present)
[ 0.590974] isapnp: No Plug & Play device found
[ 0.595844] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.596230] Real Time Clock Driver v1.12b
[ 0.596286] Linux agpgart interface v0.103
[ 0.596363] [drm] Initialized drm 1.1.0 20060810
[ 0.596722] [drm] Memory usable by graphics device = 2048M
[ 0.596783] i915 0000:00:02.0: setting latency timer to 64
[ 0.596937] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.596996] [drm] Driver supports precise vblank timestamp query.
[ 0.597106] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.618321] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 0.618380] [drm] This can cause pipe underruns and display issues.
[ 0.618439] [drm] Please upgrade your BIOS to fix this.
[ 0.634607] fbcon: inteldrmfb (fb0) is primary device
[ 1.228700] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.228702] Switching to clocksource tsc
[ 1.774903] Console: switching to colour frame buffer device 170x48
[ 1.777714] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.777736] i915 0000:00:02.0: registered panic notifier
[ 1.797990] acpi device:31: registered as cooling_device4
[ 1.798123] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.798175] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.798220] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.798312] ahci 0000:00:1f.2: version 3.0
[ 1.813379] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[ 1.813412] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.813445] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.821518] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.821603] scsi0 : ahci
[ 1.821655] scsi1 : ahci
[ 1.821699] scsi2 : ahci
[ 1.821742] scsi3 : ahci
[ 1.821784] scsi4 : ahci
[ 1.821827] scsi5 : ahci
[ 1.821858] ata1: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608100 irq 19
[ 1.821885] ata2: DUMMY
[ 1.821893] ata3: DUMMY
[ 1.821902] ata4: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608280 irq 19
[ 1.821928] ata5: DUMMY
[ 1.822364] ata6: DUMMY
[ 1.822830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.823322] ehci-pci: EHCI PCI platform driver
[ 1.823862] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.823865] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.824365] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.824895] ehci-pci 0000:00:1a.0: debug port 2
[ 1.829343] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.829348] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf160a000
[ 1.841396] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.841955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.842524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.843106] usb usb1: Product: EHCI Host Controller
[ 1.843696] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.844302] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.844991] hub 1-0:1.0: USB hub found
[ 1.845624] hub 1-0:1.0: 2 ports detected
[ 1.846344] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.846347] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.846996] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.847674] ehci-pci 0000:00:1d.0: debug port 2
[ 1.852258] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.852274] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1609000
[ 1.861417] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.862121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.862837] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.863568] usb usb2: Product: EHCI Host Controller
[ 1.864308] usb usb2: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.865052] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.865845] hub 2-0:1.0: USB hub found
[ 1.866563] hub 2-0:1.0: 2 ports detected
[ 1.867308] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.868035] Initializing USB Mass Storage driver...
[ 1.868761] usbcore: registered new interface driver usb-storage
[ 1.869489] USB Mass Storage support registered.
[ 1.870209] usbcore: registered new interface driver ums-realtek
[ 1.870934] usbcore: registered new interface driver usbserial
[ 1.871647] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.878311] i8042: Detected active multiplexing controller, rev 1.1
[ 1.881830] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.882521] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.883200] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.883877] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.884555] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.885280] mousedev: PS/2 mouse device common for all mice
[ 1.886065] i2c /dev entries driver
[ 1.886944] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 1.887685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.888453] IR NEC protocol handler initialized
[ 1.889208] IR RC5(x) protocol handler initialized
[ 1.889955] IR RC6 protocol handler initialized
[ 1.890686] IR JVC protocol handler initialized
[ 1.891420] IR Sony protocol handler initialized
[ 1.892143] IR RC5 (streamzap) protocol handler initialized
[ 1.892866] IR SANYO protocol handler initialized
[ 1.893601] IR MCE Keyboard/mouse protocol handler initialized
[ 1.894406] cpuidle: using governor ladder
[ 1.895223] cpuidle: using governor menu
[ 1.896092] usbcore: registered new interface driver usbhid
[ 1.896827] usbhid: USB HID core driver
[ 1.897673] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.898406] TCP: cubic registered
[ 1.899119] NET: Registered protocol family 17
[ 1.899850] NET: Registered protocol family 15
[ 1.900674] Using IPI No-Shortcut mode
[ 1.911206] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.141805] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.146477] ata4.00: ATAPI: TSSTcorp CDDVDW SN-208AB, FC01, max UDMA/100
[ 2.153811] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.156341] ata4.00: configured for UDMA/100
[ 2.157814] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.183143] ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001A, max UDMA/100
[ 2.183943] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.185730] ata1.00: configured for UDMA/100
[ 2.186639] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
[ 2.187534] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.188338] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.189271] sd 0:0:0:0: [sda] Write Protect is off
[ 2.189899] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB FC01 PQ: 0 ANSI: 5
[ 2.190960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.190979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.192676] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.193544] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.194519] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.290393] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.291271] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.292451] hub 1-1:1.0: USB hub found
[ 2.293388] hub 1-1:1.0: 6 ports detected
[ 2.323324] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.324903] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.337580] registered taskstats version 1
[ 2.338758] ALSA device list:
[ 2.339597] No soundcards found.
[ 2.374699] kjournald starting. Commit interval 5 seconds
[ 2.374742] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 2.374748] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 2.395479] devtmpfs: mounted
[ 2.396349] Freeing unused kernel memory: 376k freed
[ 2.406091] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.538672] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.539530] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.540739] hub 2-1:1.0: USB hub found
[ 2.541679] hub 2-1:1.0: 6 ports detected
[ 2.614518] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.740474] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b213
[ 2.741363] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.742209] usb 1-1.3: Product: FJ Camera
[ 2.743061] usb 1-1.3: Manufacturer: Sonix Technology Co., Ltd.
[ 2.743902] usb 1-1.3: SerialNumber: SN0001
[ 2.818738] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.914543] usb 2-1.3: New USB device found, idVendor=0461, idProduct=4d20
[ 2.915461] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.916328] usb 2-1.3: Product: USB Optical Mouse
[ 2.919617] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.920710] hid-generic 0003:0461:4D20.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.776409] EXT3-fs (sda5): using internal journal
[ 4.537417] udevd[95]: starting version 182
[ 4.967153] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 4.996034] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 4.997305] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 4.998668] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 4.999984] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.084795] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.086430] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xf8974000, 5c:9a:d8:5c:63:31, XID 0c200000 IRQ 17
[ 5.087775] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.139085] hda_codec: ALC269VB: SKU not ready 0x90970130
[ 6.404279] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
[ 6.417104] usbcore: registered new interface driver uvcvideo
[ 6.420253] USB Video Class driver (1.1.1)
[ 6.807006] r8169 0000:07:00.0 eth0: link down
[ 6.807024] r8169 0000:07:00.0 eth0: link down
[ 7.981607] kjournald starting. Commit interval 5 seconds
[ 7.981691] EXT3-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[ 7.981901] EXT3-fs (sda8): using internal journal
[ 7.981904] EXT3-fs (sda8): mounted filesystem with writeback data mode
[ 8.011190] kjournald starting. Commit interval 5 seconds
[ 8.011278] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
[ 8.011484] EXT3-fs (sda9): using internal journal
[ 8.011486] EXT3-fs (sda9): mounted filesystem with writeback data mode
[ 8.037953] kjournald starting. Commit interval 5 seconds
[ 8.038327] EXT3-fs (sda10): using internal journal
[ 8.038330] EXT3-fs (sda10): mounted filesystem with writeback data mode
[ 8.136132] Adding 8191996k swap on /dev/sda6. Priority:-1 extents:1 across:8191996k
[ 8.340605] r8169 0000:07:00.0 eth0: link up
[ 20.014352] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 173.939823] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 174.042170] pci 0000:02:00.0: [14f1:8852] type 00 class 0x040000
[ 174.042232] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x001fffff 64bit]
[ 174.042430] pci 0000:02:00.0: supports D1 D2
[ 174.042434] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 174.042547] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 174.042727] pci 0000:02:00.0: BAR 0: assigned [mem 0xf0e00000-0xf0ffffff 64bit]
[ 174.042758] pcieport 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 174.042765] pcieport 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 174.042776] pcieport 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 174.042786] pcieport 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 174.042942] pci 0000:02:00.0: no hotplug settings from platform
[ 225.523708] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3)
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc1+ (chris@laptop) (gcc version 4.7.3 20130302 (prerelease) (GCC) ) #34 SMP PREEMPT Thu Mar 7 19:33:03 GMT 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dab0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dab0f000-0x00000000dad4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dad4f000-0x00000000dad6efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dad6f000-0x00000000daf1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daf1f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: FUJITSU LIFEBOOK AH531/FJNBB0F, BIOS 1.30 05/28/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01628000, 0x01628fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x379fffff]
[ 0.000000] [mem 0x34000000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] ACPI: RSDP 000f00e0 00024 (v02 FUJ )
[ 0.000000] ACPI: XSDT daffe120 00084 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: FACP daff0000 000F4 (v03 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: DSDT daff3000 0794A (v02 FUJ FJNBB0F 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS daf3d000 00040
[ 0.000000] ACPI: SLIC daffd000 00176 (v01 FUJ PC 00000001 FUJ 00000001)
[ 0.000000] ACPI: SSDT daffb000 01068 (v01 FUJ PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! daff2000 000A5 (v32 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: HPET dafef000 00038 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: APIC dafee000 00098 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: MCFG dafed000 0003C (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT dafec000 007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT dafeb000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI dafea000 0003E (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe9000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI dafe8000 00242 (v01 FUJ PC 00000001 PTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7810MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01629000, 0x01629fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x1fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdab0efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x00000000-0x1fdfffff]
[ 0.000000] On node 0 totalpages: 2074796
[ 0.000000] free_area_init_node: node 0, pgdat c1569140, node_mem_map f37fe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15621 pages used for memmap
[ 0.000000] HighMem zone: 1846546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f37bc000 s26496 r0 d22656 u49152
[ 0.000000] pcpu-alloc: s26496 r0 d22656 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2073012
[ 0.000000] Kernel command line: root=/dev/sda5 ro resume=/dev/sda6
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0021fe00)
[ 0.000000] Memory: 8221536k/8910848k available (4096k kernel code, 77644k reserved, 1466k data, 376k init, 7386180k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc156f000 - 0xc15cd000 ( 376 kB)
.data : 0xc1400258 - 0xc156eb80 (1466 kB)
.text : 0xc1000000 - 0xc1400258 (4096 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3008000 soft=f300a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.012000] tsc: Unable to calibrate against PIT
[ 0.012000] tsc: using HPET reference calibration
[ 0.012000] tsc: Detected 2494.327 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.65 BogoMIPS (lpj=9977308)
[ 0.000116] pid_max: default: 32768 minimum: 301
[ 0.000197] Mount-cache hash table entries: 512
[ 0.000419] Disabled fast string operations
[ 0.000475] CPU: Physical Processor ID: 0
[ 0.000529] CPU: Processor Core ID: 0
[ 0.000585] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000665] mce: CPU supports 7 MCE banks
[ 0.000730] CPU0: Thermal monitoring enabled (TM1)
[ 0.000793] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.000998] Freeing SMP alternatives: 16k freed
[ 0.001056] ACPI: Core revision 20130117
[ 0.005706] ACPI: All ACPI Tables successfully acquired
[ 0.006154] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.006629] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046416] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.046612] TSC deadline timer enabled
[ 0.046620] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.046853] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.046915] ... version: 3
[ 0.046970] ... bit width: 48
[ 0.047025] ... generic registers: 4
[ 0.047079] ... value mask: 0000ffffffffffff
[ 0.047136] ... max period: 000000007fffffff
[ 0.047192] ... fixed-purpose events: 3
[ 0.047247] ... event mask: 000000070000000f
[ 0.062836] CPU 1 irqstacks, hard=f30b2000 soft=f30b4000
[ 0.073190] Initializing CPU#1
[ 0.073965] Disabled fast string operations
[ 0.062837] smpboot: Booting Node 0, Processors #1
[ 0.076147] CPU 2 irqstacks, hard=f30d2000 soft=f30d4000
[ 0.086598] Initializing CPU#2
[ 0.087388] Disabled fast string operations
[ 0.076307] #2
[ 0.089565] CPU 3 irqstacks, hard=f30de000 soft=f30e8000
[ 0.089725] #3 OK
[ 0.100027] Initializing CPU#3
[ 0.100817] Disabled fast string operations
[ 0.102933] Brought up 4 CPUs
[ 0.103095] smpboot: Total of 4 processors activated (19954.61 BogoMIPS)
[ 0.105769] devtmpfs: initialized
[ 0.106013] PM: Registering ACPI NVS region [mem 0xdad4f000-0xdad6efff] (131072 bytes)
[ 0.106076] PM: Registering ACPI NVS region [mem 0xdaf1f000-0xdaf9efff] (524288 bytes)
[ 0.106204] NET: Registered protocol family 16
[ 0.106373] ACPI: bus type pci registered
[ 0.106467] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.106543] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.106602] PCI: Using MMCONFIG for extended config space
[ 0.106659] PCI: Using configuration type 1 for base access
[ 0.107748] bio: create slab <bio-0> at 0
[ 0.107849] ACPI: Added _OSI(Module Device)
[ 0.107905] ACPI: Added _OSI(Processor Device)
[ 0.107961] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108017] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.109289] ACPI: EC: Look up EC in DSDT
[ 0.110533] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.127015] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.127427] ACPI: SSDT dad4d718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.127877] ACPI: Dynamic OEM Table Load:
[ 0.128011] ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.139220] ACPI: SSDT daf0fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.139697] ACPI: Dynamic OEM Table Load:
[ 0.139831] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.151121] ACPI: SSDT dad4cd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.151564] ACPI: Dynamic OEM Table Load:
[ 0.151697] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.163655] ACPI: Interpreter enabled
[ 0.163714] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.163913] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.164068] S3 S4 S5)
[ 0.164244] ACPI: Using IOAPIC for interrupt routing
[ 0.164322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.168912] \_SB_.PCI0:_OSC invalid UUID
[ 0.168912] _OSC request data:1 8 1f
[ 0.168939] \_SB_.PCI0:_OSC invalid UUID
[ 0.168939] _OSC request data:1 f 1f
[ 0.168942] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.169004] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.169522] PCI host bridge to bus 0000:00
[ 0.169578] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.169635] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.170238] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.170297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.170357] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.170417] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.170483] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.170555] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.170564] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.170570] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.170574] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.170661] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.170685] pci 0000:00:16.0: reg 10: [mem 0xf1605000-0xf160500f 64bit]
[ 0.170746] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.170820] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.170842] pci 0000:00:1a.0: reg 10: [mem 0xf160a000-0xf160a3ff]
[ 0.170914] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.170949] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.171038] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.171058] pci 0000:00:1b.0: reg 10: [mem 0xf1600000-0xf1603fff 64bit]
[ 0.171112] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.171162] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.171263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.171327] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.171426] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.171464] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.171549] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.171610] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.171641] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.171730] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.171752] pci 0000:00:1d.0: reg 10: [mem 0xf1609000-0xf16093ff]
[ 0.171825] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.171857] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.171943] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.172077] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.172095] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.172103] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.172111] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.172119] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.172127] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.172135] pci 0000:00:1f.2: reg 24: [mem 0xf1608000-0xf16087ff]
[ 0.172167] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.172219] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.172234] pci 0000:00:1f.3: reg 10: [mem 0xf1604000-0xf16040ff 64bit]
[ 0.172255] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.172549] pci 0000:01:00.0: [8086:008a] type 00 class 0x028000
[ 0.172697] pci 0000:01:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
[ 0.173253] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.173378] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.179208] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.179272] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.179360] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.179421] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.179426] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.179435] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.179509] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.179530] pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.179564] pci 0000:07:00.0: reg 18: [mem 0xf0c04000-0xf0c04fff 64bit pref]
[ 0.179586] pci 0000:07:00.0: reg 20: [mem 0xf0c00000-0xf0c03fff 64bit pref]
[ 0.179646] pci 0000:07:00.0: supports D1 D2
[ 0.179647] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.179687] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.187116] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.187202] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.187210] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.187231] pci_bus 0000:00: on NUMA node 0
[ 0.187231] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.187606] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.188182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.188756] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.189330] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.189905] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.190560] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.191215] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.191789] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.192545] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.192684] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.192726] Found 1 acpi root devices
[ 0.192754] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.192917] ACPI: No dock devices found.
[ 0.193006] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.193069] vgaarb: loaded
[ 0.193121] vgaarb: bridge control possible 0000:00:02.0
[ 0.193227] SCSI subsystem initialized
[ 0.193283] ACPI: bus type scsi registered
[ 0.193349] libata version 3.00 loaded.
[ 0.193352] ACPI: bus type usb registered
[ 0.193420] usbcore: registered new interface driver usbfs
[ 0.193487] usbcore: registered new interface driver hub
[ 0.193563] usbcore: registered new device driver usb
[ 0.193632] Linux video capture interface: v2.00
[ 0.193716] Advanced Linux Sound Architecture Driver Initialized.
[ 0.193774] PCI: Using ACPI for IRQ routing
[ 0.195462] PCI: pci_cache_line_size set to 64 bytes
[ 0.195553] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.195554] e820: reserve RAM buffer [mem 0xdab0f000-0xdbffffff]
[ 0.195555] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.195556] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.195675] Switching to clocksource hpet
[ 0.195771] pnp: PnP ACPI init
[ 0.195827] ACPI: bus type pnp registered
[ 0.195902] pnp 00:00: [dma 4]
[ 0.195915] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.195931] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.195998] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.196020] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.196051] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.196110] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.196169] system 00:04: [io 0xffff] has been reserved
[ 0.196228] system 00:04: [io 0xffff] has been reserved
[ 0.196285] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.196344] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.196403] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.196462] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.196521] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.196539] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.196573] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.196632] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.196651] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.196670] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.196775] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.196835] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.196895] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.196955] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.197014] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.197074] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.197137] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.197197] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.197256] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.197316] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.197376] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.197540] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.197600] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.197661] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.197692] pnp: PnP ACPI: found 11 devices
[ 0.197747] ACPI: ACPI bus type pnp unregistered
[ 0.233658] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.233791] pci 0000:00:1c.3: PCI bridge to [bus 02-06]
[ 0.233850] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.233914] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.233977] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.234045] pci 0000:00:1c.5: PCI bridge to [bus 07]
[ 0.234102] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.234166] pci 0000:00:1c.5: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.234353] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.234355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.234356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.234358] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.234359] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.234360] pci_bus 0000:01: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.234362] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.234363] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.234364] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.234366] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.234367] pci_bus 0000:07: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref]
[ 0.234390] NET: Registered protocol family 2
[ 0.234562] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234634] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234703] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234773] TCP: reno registered
[ 0.234826] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234887] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234981] NET: Registered protocol family 1
[ 0.235043] pci 0000:00:02.0: Boot video device
[ 0.235262] PCI: CLS 64 bytes, default 64
[ 0.235834] bounce pool size: 64 pages
[ 0.236972] fuse init (API version 7.21)
[ 0.237088] msgmni has been set to 1631
[ 0.237415] io scheduler noop registered
[ 0.237507] io scheduler cfq registered (default)
[ 0.237768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.237840] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.237909] intel_idle: MWAIT substates: 0x21120
[ 0.237909] intel_idle: v0.4 model 0x2A
[ 0.237910] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.238027] ACPI: AC Adapter [ACAD] (on-line)
[ 0.238195] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.238258] ACPI: Power Button [PWRB]
[ 0.238340] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.238414] ACPI: Lid Switch [LID]
[ 0.238490] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.238553] ACPI: Power Button [PWRF]
[ 0.238659] ACPI: Requesting acpi_cpufreq
[ 0.240502] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.240561] ACPI: Thermal Zone [THRM] (55 C)
[ 0.240628] isapnp: Scanning for PnP cards...
[ 0.241093] ACPI: Battery Slot [BAT1] (battery present)
[ 0.595042] isapnp: No Plug & Play device found
[ 0.599949] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.600336] Real Time Clock Driver v1.12b
[ 0.600392] Linux agpgart interface v0.103
[ 0.600469] [drm] Initialized drm 1.1.0 20060810
[ 0.600830] [drm] Memory usable by graphics device = 2048M
[ 0.600891] i915 0000:00:02.0: setting latency timer to 64
[ 0.601044] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.601103] [drm] Driver supports precise vblank timestamp query.
[ 0.601215] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.622424] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 0.622483] [drm] This can cause pipe underruns and display issues.
[ 0.622541] [drm] Please upgrade your BIOS to fix this.
[ 0.638836] fbcon: inteldrmfb (fb0) is primary device
[ 1.232933] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.232935] Switching to clocksource tsc
[ 1.813739] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.819197] Console: switching to colour frame buffer device 170x48
[ 1.822032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.822054] i915 0000:00:02.0: registered panic notifier
[ 1.842276] acpi device:31: registered as cooling_device4
[ 1.842409] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.842462] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.842508] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.842600] ahci 0000:00:1f.2: version 3.0
[ 1.857654] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode
[ 1.857686] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.857719] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.865878] scsi0 : ahci
[ 1.865930] scsi1 : ahci
[ 1.865970] scsi2 : ahci
[ 1.866010] scsi3 : ahci
[ 1.866049] scsi4 : ahci
[ 1.866089] scsi5 : ahci
[ 1.866120] ata1: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608100 irq 19
[ 1.866147] ata2: DUMMY
[ 1.866154] ata3: DUMMY
[ 1.866164] ata4: SATA max UDMA/133 abar m2048@0xf1608000 port 0xf1608280 irq 19
[ 1.866190] ata5: DUMMY
[ 1.866627] ata6: DUMMY
[ 1.867091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.867581] ehci-pci: EHCI PCI platform driver
[ 1.868116] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 1.868119] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.868616] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.869146] ehci-pci 0000:00:1a.0: debug port 2
[ 1.873586] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.873591] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf160a000
[ 1.885675] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.886234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.886802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.887383] usb usb1: Product: EHCI Host Controller
[ 1.887972] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.888577] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.889260] hub 1-0:1.0: USB hub found
[ 1.889888] hub 1-0:1.0: 2 ports detected
[ 1.890603] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.890606] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.891254] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.891931] ehci-pci 0000:00:1d.0: debug port 2
[ 1.896501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.896516] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1609000
[ 1.905697] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.906402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.907118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.907849] usb usb2: Product: EHCI Host Controller
[ 1.908589] usb usb2: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
[ 1.909333] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.910126] hub 2-0:1.0: USB hub found
[ 1.910844] hub 2-0:1.0: 2 ports detected
[ 1.911587] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.912312] Initializing USB Mass Storage driver...
[ 1.913032] usbcore: registered new interface driver usb-storage
[ 1.913752] USB Mass Storage support registered.
[ 1.914474] usbcore: registered new interface driver ums-realtek
[ 1.915209] usbcore: registered new interface driver usbserial
[ 1.915932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.922342] i8042: Detected active multiplexing controller, rev 1.1
[ 1.925863] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.926562] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.927242] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.927920] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.928597] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.929318] mousedev: PS/2 mouse device common for all mice
[ 1.930087] i2c /dev entries driver
[ 1.930956] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 1.931697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.932470] IR NEC protocol handler initialized
[ 1.933222] IR RC5(x) protocol handler initialized
[ 1.933972] IR RC6 protocol handler initialized
[ 1.934709] IR JVC protocol handler initialized
[ 1.935439] IR Sony protocol handler initialized
[ 1.936163] IR RC5 (streamzap) protocol handler initialized
[ 1.936895] IR SANYO protocol handler initialized
[ 1.937619] IR MCE Keyboard/mouse protocol handler initialized
[ 1.938430] cpuidle: using governor ladder
[ 1.939250] cpuidle: using governor menu
[ 1.940143] usbcore: registered new interface driver usbhid
[ 1.940878] usbhid: USB HID core driver
[ 1.941710] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.942447] TCP: cubic registered
[ 1.943179] NET: Registered protocol family 17
[ 1.943903] NET: Registered protocol family 15
[ 1.944711] Using IPI No-Shortcut mode
[ 1.953868] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.186080] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.192122] ata4.00: ATAPI: TSSTcorp CDDVDW SN-208AB, FC01, max UDMA/100
[ 2.194084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.201976] ata4.00: configured for UDMA/100
[ 2.202054] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.243147] ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001A, max UDMA/100
[ 2.243948] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.245728] ata1.00: configured for UDMA/100
[ 2.246715] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
[ 2.247608] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.248409] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.249332] sd 0:0:0:0: [sda] Write Protect is off
[ 2.249993] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208AB FC01 PQ: 0 ANSI: 5
[ 2.251016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.251075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.252772] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.253643] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.254651] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.334640] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.335513] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.336694] hub 1-1:1.0: USB hub found
[ 2.337633] hub 1-1:1.0: 6 ports detected
[ 2.383380] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.384914] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.397591] registered taskstats version 1
[ 2.398781] ALSA device list:
[ 2.399618] No soundcards found.
[ 2.434707] kjournald starting. Commit interval 5 seconds
[ 2.434748] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 2.434753] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 2.450343] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.455498] devtmpfs: mounted
[ 2.456352] Freeing unused kernel memory: 376k freed
[ 2.582916] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.583776] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.584994] hub 2-1:1.0: USB hub found
[ 2.585995] hub 2-1:1.0: 6 ports detected
[ 2.658747] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.784796] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b213
[ 2.785674] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.786522] usb 1-1.3: Product: FJ Camera
[ 2.787377] usb 1-1.3: Manufacturer: Sonix Technology Co., Ltd.
[ 2.788221] usb 1-1.3: SerialNumber: SN0001
[ 2.863019] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.958788] usb 2-1.3: New USB device found, idVendor=0461, idProduct=4d20
[ 2.959708] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.960590] usb 2-1.3: Product: USB Optical Mouse
[ 2.963929] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.964925] hid-generic 0003:0461:4D20.0001: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 3.791616] EXT3-fs (sda5): using internal journal
[ 4.564100] udevd[95]: starting version 182
[ 4.971568] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 5.000453] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 5.001741] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 5.003104] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 5.004435] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.111472] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.112908] r8169 0000:07:00.0 eth0: RTL8168e/8111e at 0xf89dc000, 5c:9a:d8:5c:63:31, XID 0c200000 IRQ 17
[ 5.114134] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.165709] hda_codec: ALC269VB: SKU not ready 0x90970130
[ 6.218516] r8169 0000:07:00.0 eth0: link down
[ 6.219836] r8169 0000:07:00.0 eth0: link down
[ 6.820272] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
[ 6.833017] usbcore: registered new interface driver uvcvideo
[ 6.836051] USB Video Class driver (1.1.1)
[ 7.754281] r8169 0000:07:00.0 eth0: link up
[ 8.008218] kjournald starting. Commit interval 5 seconds
[ 8.008281] EXT3-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[ 8.013531] EXT3-fs (sda8): using internal journal
[ 8.016138] EXT3-fs (sda8): mounted filesystem with writeback data mode
[ 8.060072] kjournald starting. Commit interval 5 seconds
[ 8.060142] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
[ 8.065466] EXT3-fs (sda9): using internal journal
[ 8.068132] EXT3-fs (sda9): mounted filesystem with writeback data mode
[ 8.120214] kjournald starting. Commit interval 5 seconds
[ 8.123089] EXT3-fs (sda10): using internal journal
[ 8.125830] EXT3-fs (sda10): mounted filesystem with writeback data mode
[ 8.218360] Adding 8191996k swap on /dev/sda6. Priority:-1 extents:1 across:8191996k
[ 20.641906] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
\
 
 \ /
  Last update: 2013-03-07 22:03    [W:2.329 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site