lkml.org 
[lkml]   [2013]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 10/21] ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes
    Date
    Use usbhs_init_phys() to register the PHY's RESET regulators
    and the NOP PHY devices.

    Signed-off-by: Roger Quadros <rogerq@ti.com>
    ---
    arch/arm/mach-omap2/board-cm-t3517.c | 20 ++++++++++++++------
    1 files changed, 14 insertions(+), 6 deletions(-)

    diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
    index a66da80..6920f6cf 100644
    --- a/arch/arm/mach-omap2/board-cm-t3517.c
    +++ b/arch/arm/mach-omap2/board-cm-t3517.c
    @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {}
    #define HSUSB2_RESET_GPIO (147)
    #define USB_HUB_RESET_GPIO (152)

    +static struct usbhs_phy_data phy_data[] __initdata = {
    + {
    + .port = 1,
    + .reset_gpio = HSUSB1_RESET_GPIO,
    + .vcc_gpio = -EINVAL,
    + },
    + {
    + .port = 2,
    + .reset_gpio = HSUSB2_RESET_GPIO,
    + .vcc_gpio = -EINVAL,
    + },
    +};
    +
    static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
    .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
    .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
    - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
    -
    - .phy_reset = true,
    - .reset_gpio_port[0] = HSUSB1_RESET_GPIO,
    - .reset_gpio_port[1] = HSUSB2_RESET_GPIO,
    - .reset_gpio_port[2] = -EINVAL,
    };

    static int __init cm_t3517_init_usbh(void)
    @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void)
    msleep(1);
    }

    + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
    usbhs_init(&cm_t3517_ehci_pdata);

    return 0;
    --
    1.7.4.1


    \
     
     \ /
      Last update: 2013-03-20 18:01    [W:2.150 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site