lkml.org 
[lkml]   [2013]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] mfd: palmas: Add power off control
From
Date
On Sat, 2013-03-16 at 01:22 +0800, Stephen Warren wrote:
> On 03/14/2013 11:51 PM, Bill Huang wrote:
> > On Fri, 2013-03-15 at 13:19 +0800, Stephen Warren wrote:
> >> On 03/14/2013 04:58 AM, Bill Huang wrote:
> >>> Hook up "pm_power_off" to palmas power off routine if there is DT
> >>> property "ti,system-power-controller" defined, so platform which is
> >>> powered by this regulator can be powered off properly.
> >>
> >>> diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
> >>
> >>> + pdata->pm_off = of_property_read_bool(node,
> >>> + "ti,system-power-controller");
> >>
> >> You would need to add that property to the DT binding documentation for
> >> this device.
> >
> > Does it work that some time later Laxmain helps to add it when he
> > submits his pmic bindings for Palmas?
>
> I'll note that Ian Lartey and Graeme Gregory actually seem to be the
> people defining the PMIC bindings for Palmas. See:
>
> http://comments.gmane.org/gmane.linux.documentation/9948
>
> Or is Laxman planning to send some updates to that?
>
> But irrespective of that no, I don't think that influences this at all;
> if you introduce driver support for new DT content, then either that DT
> content should already be documented in the binding, or this patch
> should add it to the documentation.

Thanks, here I just need to add a property into the DT bindings but
currently there is no any Palmas binding document exist so that means I
have to hold off the patch.




\
 
 \ /
  Last update: 2013-03-16 03:41    [W:0.387 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site