lkml.org 
[lkml]   [2013]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 1/1] clk: Add notifier support in clk_prepare_enable/clk_disable_unprepare
On Fri, 15 Mar 2013, Russell King - ARM Linux wrote:

> On Tue, Mar 12, 2013 at 06:47:53PM -0700, Bill Huang wrote:
> > On Tue, 2013-03-12 at 21:40 +0800, Russell King - ARM Linux wrote:
> > > On Tue, Mar 12, 2013 at 05:37:41AM -0700, Bill Huang wrote:
> > > > Add the below four notifier events so drivers which are interested in
> > > > knowing the clock status can act accordingly. This is extremely useful
> > > > in some of the DVFS (Dynamic Voltage Frequency Scaling) design.
> > > >
> > > > PRE_CLK_ENABLE
> > > > POST_CLK_ENABLE
> > > > PRE_CLK_DISABLE
> > > > POST_CLK_DISABLE
> > > >
> > > > Signed-off-by: Bill Huang <bilhuang@nvidia.com>
> > >
> > > NAK. *Sigh* NO, this is the wrong level to be doing stuff like this.
> > >
> > > The *ONLY* thing that clk_prepare_enable() and clk_prepare_disable() should
> > > *EVER* be doing is calling clk_prepare(), clk_enable(), clk_disable() and
> > > clk_unprepare(). Those two functions are *merely* helpers for drivers
> > > who don't wish to make the individual calls.
> > >
> > > Drivers are still completely free to call the individual functions, at
> > > which point your proposal breaks horribly - and they _do_ call the
> > > individual functions.
> >
> > I'm proposing to give device driver a choice when it knows that some
> > driver might be interested in knowing its clock's enabled/disabled state
> > change at runtime, this is very important for centralized DVFS core
> > driver. It is not meant to be covering all cases especially for drivers
> > which is not part of the DVFS, so we don't care if it is calling
> > clk_enable/disable directly or not.
>
> But you're not giving drivers a choice. You're giving them an ultimatum.
> Either they use clk_prepare_enable() which must only be called from non-
> atomic contexts and have the notifiers, or if they need to use the
> individual functions (which is what they _should_ be doing but people
> are too lazy to properly convert stuff) they don't get the option of
> the notifiers at all.
>
> This sucks totally, design wise.
>
> The whole point of clk_prepare_enable() is that it is a helper function
> to _only_ do the clk_prepare() call followed by a clk_enable() call and
> _nothing_ _else_ _what_ _so_ _ever_.

If people are too lazy and start abusing clk_prepare_enable() then this
helper function becomes counter-productive and should simply be removed.
Same issue as with IS_ERR_OR_NULL().


Nicolas


\
 
 \ /
  Last update: 2013-03-15 20:23    [W:0.106 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site