lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: 3.9.0-rc1: kexec not working: root disk does not show up
Vivek Goyal wrote:
> On Fri, Mar 08, 2013 at 12:17:04PM -0500, Vivek Goyal wrote:
>> Hi,
>>
>> With 3.9.0-rc1, kexec seems to have stopped working on my system. 3.8.0
>> works just fine.
>>
>> In second kernel root disk does not show up. Dracut waits for quite some
>> time and then gives up.
>>
>> My root is on SATA disk. None of the SATA disks are up. Not sure but
>> looking at the logs, I am wondering if it is SATA driver related issue.
>>
>> [ 17.564011] ata4.00: qc timeout (cmd 0xec)
>> [ 17.568179] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.574339] ata4: limiting SATA link speed to 1.5 Gbps
>> [ 17.579549] ata1.00: qc timeout (cmd 0xec)
>> [ 17.583716] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.589864] ata1: limiting SATA link speed to 1.5 Gbps
>> [ 17.595070] ata2.00: qc timeout (cmd 0xa1)
>> [ 17.599231] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.605379] ata2: limiting SATA link speed to 1.5 Gbps
>> [ 17.610593] ata6.00: qc timeout (cmd 0xec)
>> [ 17.614760] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.620908] ata6: limiting SATA link speed to 1.5 Gbps
>> [ 17.626120] ata3.00: qc timeout (cmd 0xec)
>> [ 17.630280] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.636427] ata3: limiting SATA link speed to 1.5 Gbps
>> [ 17.913016] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.919279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.931019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.943016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.949275] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>>
>> Following are the console logs of second kernel boot through kexec. And
>> after that also attaching console logs for regular first kernel boot.
>
> Ok, some more observation.
>
> - Problem seems to be in during shutdown path. Because older kernel 3.8
> can kexec into newer kernel 3.9.rc1 but not vice-a-versa.
>
> I did git bisecting and following commit seems to be problem.
>
> commit 7897e6022761ace7377f0f784fca059da55f5d71
> Author: Konstantin Khlebnikov<khlebnikov@openvz.org>
> Date: Mon Feb 4 15:55:58 2013 +0400
>
> PCI: Disable Bus Master unconditionally in pci_device_shutdown()
>
> Commit b566a22c23 ("PCI: disable Bus Master on PCI device shutdown")
> used pci_disable_device(), but that doesn't disable Bus Mastering
> unconditionally; we allow nested enable/disable calls, and only the
> last disable call actually does anything.
>
> This uses pci_clear_master() to unconditionally clear the Bus Master
> bit.
>
> Matthew Garrett and Alan Cox said (see LKML link below) that clearing
> Bus
> Master for all PCI devices may lead to unpredictable consequences:
> some
> devices ignores this bit and continue DMA, some of them hang after
> that or
> crash the whole system. But we're already trying to clear Bus Master
> in
> general because of b566a22c23; this merely deals with the cases where
> drivers haven't shut down the device correctly.
>
> [bhelgaas: changelog]
> Link: https://lkml.org/lkml/2012/6/6/278
> Signed-off-by: Konstantin Khlebnikov<khlebnikov@openvz.org>
> Signed-off-by: Bjorn Helgaas<bhelgaas@google.com>
> Acked-by: Rafael J. Wysocki<rafael.j.wysocki@intel.com>
>
> I reverted above commit and things work again. Just that I get following
> warning during shutdown.
>
> [ 54.252516] ------------[ cut here ]------------
> [ 54.257199] WARNING: at drivers/pci/pci.c:1397
> pci_disable_device+0x90/0xa0()
> [ 54.264387] Hardware name: HP xw6600 Workstation
> [ 54.269061] Device pci
> disabling already-disabled device
> [ 54.274341] Modules linked in: floppy
> [ 54.278403] Pid: 5272, comm: kexec Not tainted 3.9.0-rc2+ #207
> [ 54.284289] Call Trace:
> [ 54.286801] [<ffffffff8133c600>] ? pci_disable_device+0x60/0xa0
> [ 54.292864] [<ffffffff8103e49f>] warn_slowpath_common+0x7f/0xc0
> [ 54.298926] [<ffffffff8103e596>] warn_slowpath_fmt+0x46/0x50
> [ 54.304727] [<ffffffff8133c592>] ? do_pci_disable_device+0x52/0x60
> [ 54.311050] [<ffffffff8133c630>] pci_disable_device+0x90/0xa0
> [ 54.316938] [<ffffffff8133e1a4>] pci_device_shutdown+0x44/0x50
> [ 54.322915] [<ffffffff81462b2d>] device_shutdown+0x1d/0x180
> [ 54.328631] [<ffffffff81056ba6>] kernel_restart_prepare+0x36/0x50
> [ 54.334866] [<ffffffff810a16c0>] kernel_kexec+0x50/0x80
> [ 54.340235] [<ffffffff81056e35>] sys_reboot+0x1f5/0x260
> [ 54.345604] [<ffffffff811621b9>] ? mntput_no_expire+0x49/0x160
> [ 54.351578] [<ffffffff811622f6>] ? mntput+0x26/0x40
> [ 54.356601] [<ffffffff81144539>] ? __fput+0x1a9/0x280
> [ 54.361798] [<ffffffff8105fae4>] ? task_work_run+0xc4/0xe0
> [ 54.367428] [<ffffffff810029a5>] ? do_notify_resume+0x75/0x80
> [ 54.373319] [<ffffffff81882742>] system_call_fastpath+0x16/0x1b
> [ 54.379382] ---[ end trace ea6ecbf97debf2e2 ]---
> [ 54.385157] Starting new kernel
>
>
> I am leaving the logs from previous mail intact so that newly CCed
> people can have a look at it and don't go hunting for old mail in
> lkml archives.
>
> Thanks
> Vivek
>

Look like I fixed one bug and added another.
After ->shutdown() device can be in D3-cold state and config space is unreachable.

try this patch

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -385,6 +385,12 @@ static void pci_device_shutdown(struct device *dev)

if (drv && drv->shutdown)
drv->shutdown(pci_dev);
+
+ if (pci_dev->current_state == PCI_D3cold) {
+ WARN_ON(pci_dev->msi_enabled || pci_dev->msix_enabled);
+ return;
+ }
+
pci_msi_shutdown(pci_dev);
pci_msix_shutdown(pci_dev);

>>
>> [ 78.286132] Starting new kernel
>> [ 0.000000] Initializing cgroup subsys cpuset
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Linux version 3.9.0-rc1+ (<edited>) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #168 SMP Fri Mar 8 11:26:01 EST 2013
>> [ 0.000000] Command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 selinux=0 crashkernel=128M@64M
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000096fff] usable
>> [ 0.000000] BIOS-e820: [mem 0x0000000000097000-0x000000000009ffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffc283f] usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000bffc2840-0x00000000bfffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.5 present.
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
>> [ 0.000000] e820: last_pfn = 0xbffc2 max_arch_pfn = 0x400000000
>> [ 0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
>> [ 0.000000] Scanning 1 areas for low memory corruption
>> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
>> [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
>> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
>> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffc1fff]
>> [ 0.000000] RAMDISK: [mem 0x7fb80000-0x7fff4fff]
>> [ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 4095MB)
>> [ 0.000000] ACPI: RSDP 00000000000e9810 00024 (v02 HPQOEM)
>> [ 0.000000] ACPI: XSDT 00000000bffc52ec 0006C (v01 HPQOEM SLIC-WKS 20070918 00000000)
>> [ 0.000000] ACPI: FACP 00000000bffc5494 000F4 (v03 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI BIOS Bug: Error: 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20130117/tbfadt-462)
>> [ 0.000000] ACPI: DSDT 00000000bffc5a6e 02697 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
>> [ 0.000000] ACPI: FACS 00000000bffc5200 00040
>> [ 0.000000] ACPI: SSDT 00000000bffc8105 06A92 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
>> [ 0.000000] ACPI: APIC 00000000bffc5588 000C8 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: ASF! 00000000bffc5650 0006A (v32 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: MCFG 00000000bffc5852 0003C (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: SLIC 00000000bffc588e 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
>> [ 0.000000] ACPI: HPET 00000000bffc5a04 00038 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: TCPA 00000000bffc5a3c 00032 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: DMAR 00000000bffc56ba 00108 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] No NUMA configuration found
>> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
>> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
>> [ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff]
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00001000-0x00096fff]
>> [ 0.000000] node 0: [mem 0x00100000-0xbffc1fff]
>> [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
>> [ 0.000000] ACPI: PM-Timer IO Port: 0xf808
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
>> [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>> [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>> [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>> [ 0.000000] PM: Registered nosave memory: 00000000bffc2000 - 00000000bffc3000
>> [ 0.000000] PM: Registered nosave memory: 00000000bffc3000 - 00000000c0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>> [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80000 r8192 d22400 u262144
>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032002
>> [ 0.000000] Policy zone: Normal
>> [ 0.000000] Kernel command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 selinux=0 crashkernel=128M@64M
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] __ex_table already sorted, skipping sort
>> [ 0.000000] Checking aperture...
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] Memory: 3907908k/5242880k available (8771k kernel code, 1049248k absent, 285724k reserved, 6390k data, 1160k init)
>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>> [ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] console [ttyS0] enabled
>> [ 0.000000] tsc: Fast TSC calibration using PIT
>> [ 0.000000] tsc: Detected 2333.212 MHz processor
>> [ 0.003004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.42 BogoMIPS (lpj=2333212)
>> [ 0.005003] pid_max: default: 32768 minimum: 301
>> [ 0.006037] Security Framework initialized
>> [ 0.007006] SELinux: Disabled at boot.
>> [ 0.009034] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> [ 0.012165] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> [ 0.014109] Mount-cache hash table entries: 256
>> [ 0.015275] Initializing cgroup subsys cpuacct
>> [ 0.016004] Initializing cgroup subsys freezer
>> [ 0.017003] Initializing cgroup subsys blkio
>> [ 0.018041] CPU: Physical Processor ID: 0
>> [ 0.019003] CPU: Processor Core ID: 0
>> [ 0.020003] mce: CPU supports 6 MCE banks
>> [ 0.021015] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>> [ 0.021015] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>> [ 0.021015] tlb_flushall_shift: -1
>> [ 0.022108] Freeing SMP alternatives: 28k freed
>> [ 0.023017] ACPI: Core revision 20130117
>> [ 0.026741] ACPI: All ACPI Tables successfully acquired
>> [ 0.029012] ftrace: allocating 30474 entries in 120 pages
>> [ 0.038566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.039000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> [ 0.039000] ...trying to set up timer (IRQ0) through the 8259A ...
>> [ 0.039000] ..... (found apic 0 pin 2) ...
>> [ 0.039000] ....... failed.
>> [ 0.039000] ...trying to set up timer as Virtual Wire IRQ...
>> [ 0.049837] ..... works.
>> [ 0.050001] smpboot: CPU0: Genuine Intel(R) CPU @ 2.33GHz (fam: 06, model: 17, stepping: 04)
>> [ 0.055000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>> [ 0.059002] ... version: 2
>> [ 0.060001] ... bit width: 40
>> [ 0.061001] ... generic registers: 2
>> [ 0.062001] ... value mask: 000000ffffffffff
>> [ 0.063001] ... max period: 000000007fffffff
>> [ 0.064001] ... fixed-purpose events: 3
>> [ 0.065001] ... event mask: 0000000700000003
>> [ 0.067132] smpboot: Booting Node 0, Processors #1 #2 #3
>> [ 0.106013] Brought up 4 CPUs
>> [ 0.107003] smpboot: Total of 4 processors activated (18665.69 BogoMIPS)
>> [ 0.110027] EVM: security.selinux
>> [ 0.111002] EVM: security.ima
>> [ 0.112001] EVM: security.capability
>> [ 0.113311] xor: measuring software checksum speed
>> [ 0.124002] prefetch64-sse: 10032.000 MB/sec
>> [ 0.135002] generic_sse: 8868.000 MB/sec
>> [ 0.136001] xor: using function: prefetch64-sse (10032.000 MB/sec)
>> [ 0.137021] RTC time: 11:34:18, date: 03/08/13
>> [ 0.138061] NET: Registered protocol family 16
>> [ 0.140097] ACPI: bus type PCI registered
>> [ 0.141030] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 0.142007] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ 0.158208] PCI: Using configuration type 1 for base access
>> [ 0.180046] bio: create slab<bio-0> at 0
>> [ 0.200279] raid6: sse2x1 3210 MB/s
>> [ 0.220281] raid6: sse2x2 5792 MB/s
>> [ 0.240279] raid6: sse2x4 6367 MB/s
>> [ 0.244002] raid6: using algorithm sse2x4 (6367 MB/s)
>> [ 0.249002] raid6: using ssse3x2 recovery algorithm
>> [ 0.254021] ACPI: Added _OSI(Module Device)
>> [ 0.259004] ACPI: Added _OSI(Processor Device)
>> [ 0.264002] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.269002] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 0.287016] ACPI: SSDT 00000000bffd07c1 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
>> [ 0.295577] ACPI: Dynamic OEM Table Load:
>> [ 0.300255] ACPI: SSDT (null) 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
>> [ 0.314303] ACPI: Interpreter enabled
>> [ 0.318007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
>> [ 0.328002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
>> [ 0.337010] ACPI: (supports S0 S3 S4 S5)
>> [ 0.341002] ACPI: Using IOAPIC for interrupt routing
>> [ 0.346024] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>> [ 0.371038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ 0.377054] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
>> [ 0.387002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
>> [ 0.399002] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
>> [ 0.407045] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
>> [ 0.416002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
>> [ 0.429006] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>> [ 0.437002] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
>> [ 0.445055] PCI host bridge to bus 0000:00
>> [ 0.449005] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [ 0.455003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
>> [ 0.461002] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
>> [ 0.469088] pci 0000:00:01.0: System wakeup disabled by ACPI
>> [ 0.474092] pci 0000:00:05.0: System wakeup disabled by ACPI
>> [ 0.480093] pci 0000:00:09.0: System wakeup disabled by ACPI
>> [ 0.488198] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> [ 0.494124] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> [ 0.500108] pci 0000:00:1d.1: System wakeup disabled by ACPI
>> [ 0.506105] pci 0000:00:1d.2: System wakeup disabled by ACPI
>> [ 0.512107] pci 0000:00:1d.3: System wakeup disabled by ACPI
>> [ 0.517165] pci 0000:00:1d.7: System wakeup disabled by ACPI
>> [ 0.523090] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> [ 0.530184] pci 0000:00:01.0: PCI bridge to [bus 80]
>> [ 0.535072] pci 0000:60:00.0: System wakeup disabled by ACPI
>> [ 0.543013] pci 0000:00:05.0: PCI bridge to [bus 60]
>> [ 0.559008] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>> [ 0.569972] pci 0000:1e:00.0: System wakeup disabled by ACPI
>> [ 0.580060] pci 0000:1e:01.0: System wakeup disabled by ACPI
>> [ 0.587184] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>> [ 0.595031] pci 0000:1e:00.0: PCI bridge to [bus 20]
>> [ 0.606331] pci 0000:40:00.0: System wakeup disabled by ACPI
>> [ 0.612281] pci 0000:1e:01.0: PCI bridge to [bus 40]
>> [ 0.621230] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
>> [ 0.628272] pci 0000:0e:00.0: System wakeup disabled by ACPI
>> [ 0.636052] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>> [ 0.641052] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>> [ 0.648032] ACPI _OSC control for PCIe not granted, disabling ASPM
>> [ 0.655324] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15), disabled.
>> [ 0.663054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
>> [ 0.671307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15), disabled.
>> [ 0.680314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15), disabled.
>> [ 0.688307] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>> [ 0.697314] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15), disabled.
>> [ 0.705306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15), disabled.
>> [ 0.714311] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>> [ 0.723080] ACPI: No dock devices found.
>> [ 0.727034] vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 0.735004] vgaarb: loaded
>> [ 0.738001] vgaarb: bridge control possible 0000:60:00.0
>> [ 0.744075] SCSI subsystem initialized
>> [ 0.748004] ACPI: bus type ATA registered
>> [ 0.752034] ACPI: bus type USB registered
>> [ 0.756034] usbcore: registered new interface driver usbfs
>> [ 0.762020] usbcore: registered new interface driver hub
>> [ 0.767035] usbcore: registered new device driver usb
>> [ 0.773034] pps_core: LinuxPPS API ver. 1 registered
>> [ 0.778009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti<giometti@linux.it>
>> [ 0.787019] PTP clock support registered
>> [ 0.791043] Advanced Linux Sound Architecture Driver Initialized.
>> [ 0.798003] PCI: Using ACPI for IRQ routing
>> [ 0.850063] cfg80211: Calling CRDA to update world regulatory domain
>> [ 0.852127] NetLabel: Initializing
>> [ 0.852128] NetLabel: domain hash size = 128
>> [ 0.852129] NetLabel: protocols = UNLABELED CIPSOv4
>> [ 0.852177] NetLabel: unlabeled traffic allowed by default
>> [ 0.852208] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>> [ 0.852208] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> [ 0.852208] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>> [ 0.893076] Switching to clocksource hpet
>> [ 0.903801] pnp: PnP ACPI init
>> [ 0.906931] ACPI: bus type PNP registered
>> [ 0.912914] system 00:0b: [io 0x04d0-0x04d1] has been reserved
>> [ 0.919062] system 00:0c: [io 0x0400-0x041f] has been reserved
>> [ 0.925046] system 00:0c: [io 0x0420-0x043f] has been reserved
>> [ 0.931032] system 00:0c: [io 0x0440-0x045f] has been reserved
>> [ 0.937019] system 00:0c: [io 0x0460-0x047f] has been reserved
>> [ 0.943005] system 00:0c: [io 0x0480-0x048f] has been reserved
>> [ 0.948990] system 00:0c: [io 0x0490-0x049f] has been reserved
>> [ 0.954977] system 00:0c: [io 0xf800-0xf81f] has been reserved
>> [ 0.960964] system 00:0c: [io 0xf820-0xf83f] has been reserved
>> [ 0.966951] system 00:0c: [io 0xf840-0xf85f] has been reserved
>> [ 0.972938] system 00:0c: [io 0xf860-0xf87f] has been reserved
>> [ 0.978925] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
>> [ 0.984911] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
>> [ 0.990898] system 00:0c: [io 0xfc80-0xfcff] has been reserved
>> [ 0.996885] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
>> [ 1.002872] system 00:0c: [io 0xfe80-0xfeff] has been reserved
>> [ 1.008991] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>> [ 1.015668] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
>> [ 1.022350] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>> [ 1.029031] system 00:0d: [mem 0xfe700000-0xfe7003ff] has been reserved
>> [ 1.035712] system 00:0d: [mem 0xfe600000-0xfe6fffff] has been reserved
>> [ 1.042393] system 00:0d: [mem 0xfe000000-0xfe01ffff] has been reserved
>> [ 1.049354] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>> [ 1.056380] system 00:0e: [mem 0x000c0000-0x000e7fff] could not be reserved
>> [ 1.063408] system 00:0e: [mem 0x000e8000-0x000effff] could not be reserved
>> [ 1.070436] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
>> [ 1.077464] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
>> [ 1.084495] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
>> [ 1.091327] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
>> [ 1.098030] pnp: PnP ACPI: found 16 devices
>> [ 1.102277] ACPI: bus type PNP unregistered
>> [ 1.118954] pci 0000:0e:00.0: no compatible bridge window for [mem 0xde7e0000-0xde7effff pref]
>> [ 1.128749] pci 0000:00:01.0: PCI bridge to [bus 80]
>> [ 1.133794] pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000)
>> [ 1.140642] pci 0000:00:05.0: PCI bridge to [bus 60]
>> [ 1.145677] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
>> [ 1.151839] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff]
>> [ 1.158694] pci 0000:00:05.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [ 1.166541] pci 0000:1e:00.0: PCI bridge to [bus 20]
>> [ 1.171944] pci 0000:40:00.0: BAR 6: assigned [mem 0xf3400000-0xf347ffff pref]
>> [ 1.179265] pci 0000:1e:01.0: PCI bridge to [bus 40]
>> [ 1.184299] pci 0000:1e:01.0: bridge window [io 0x2000-0x2fff]
>> [ 1.190551] pci 0000:1e:01.0: bridge window [mem 0xf3100000-0xf31fffff]
>> [ 1.197447] pci 0000:1e:01.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
>> [ 1.205424] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>> [ 1.210713] pci 0000:10:00.0: bridge window [io 0x2000-0x2fff]
>> [ 1.216966] pci 0000:10:00.0: bridge window [mem 0xf3100000-0xf31fffff]
>> [ 1.223859] pci 0000:10:00.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
>> [ 1.231835] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
>> [ 1.237492] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>> [ 1.242781] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
>> [ 1.248943] pci 0000:00:09.0: bridge window [mem 0xf3100000-0xf32fffff]
>> [ 1.255798] pci 0000:00:09.0: bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
>> [ 1.263645] pci 0000:0e:00.0: BAR 6: assigned [mem 0xf3500000-0xf350ffff pref]
>> [ 1.270969] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>> [ 1.276004] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
>> [ 1.282162] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
>> [ 1.289018] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref]
>> [ 1.296865] pci 0000:00:1e.0: PCI bridge to [bus 01]
>> [ 1.303293] NET: Registered protocol family 2
>> [ 1.307928] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>> [ 1.315542] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
>> [ 1.322741] TCP: Hash tables configured (established 32768 bind 32768)
>> [ 1.329384] TCP: reno registered
>> [ 1.332694] UDP hash table entries: 2048 (order: 5, 196608 bytes)
>> [ 1.338949] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
>> [ 1.346469] NET: Registered protocol family 1
>> [ 1.351012] RPC: Registered named UNIX socket transport module.
>> [ 1.356996] RPC: Registered udp transport module.
>> [ 1.361766] RPC: Registered tcp transport module.
>> [ 1.366535] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [ 1.374378] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
>> [ 1.380936] Trying to unpack rootfs image as initramfs...
>> [ 1.470967] Freeing initrd memory: 4564k freed
>> [ 1.477127] dmar: Host address width 36
>> [ 1.481034] dmar: DRHD base: 0x000000fe710000 flags: 0x0
>> [ 1.486434] dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.494272] dmar: DRHD base: 0x000000fe714000 flags: 0x0
>> [ 1.499653] dmar: IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.507499] dmar: DRHD base: 0x000000fe719000 flags: 0x0
>> [ 1.512878] dmar: IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.520720] dmar: DRHD base: 0x000000fe718000 flags: 0x1
>> [ 1.526100] dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.533943] dmar: RMRR base: 0x000000bffd3000 end: 0x000000bffd3fff
>> [ 1.540273] dmar: RMRR base: 0x000000bffd4000 end: 0x000000bffd4fff
>> [ 1.546602] dmar: RMRR base: 0x000000bffd5000 end: 0x000000bffd5fff
>> [ 1.552931] dmar: RMRR base: 0x000000bffd6000 end: 0x000000bffd6fff
>> [ 1.559275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [ 1.565780] software IO TLB [mem 0xbbfc2000-0xbffc2000] (64MB) mapped at [ffff8800bbfc2000-ffff8800bffc1fff]
>> [ 1.577157] microcode: CPU0 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.583224] microcode: CPU1 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.589304] microcode: CPU2 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.595375] microcode: CPU3 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.601536] microcode: Microcode Update Driver: v2.00<tigran@aivazian.fsnet.co.uk>, Peter Oruba
>> [ 1.610416] Scanning for low memory corruption every 60 seconds
>> [ 1.616959] Initialise module verification
>> [ 1.621181] audit: initializing netlink socket (disabled)
>> [ 1.626667] type=2000 audit(1362742457.625:1): initialized
>> [ 1.664001] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 1.677912] VFS: Disk quotas dquot_6.5.2
>> [ 1.682043] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [ 1.690900] NFS: Registering the id_resolver key type
>> [ 1.696024] Key type id_resolver registered
>> [ 1.700279] Key type id_legacy registered
>> [ 1.704466] msgmni has been set to 7641
>> [ 1.709276] Key type asymmetric registered
>> [ 1.713444] Asymmetric key parser 'x509' registered
>> [ 1.718587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>> [ 1.726134] io scheduler noop registered
>> [ 1.730124] io scheduler deadline registered
>> [ 1.734579] io scheduler cfq registered (default)
>> [ 1.743917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 1.749986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [ 1.758437] ACPI: Power Button [PBTN]
>> [ 1.762292] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [ 1.769785] ACPI: Power Button [PWRF]
>> [ 1.773899] ACPI: Requesting acpi_cpufreq
>> [ 1.781088] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ 1.808005] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> [ 1.814873] Non-volatile memory driver v1.3
>> [ 1.819226] Linux agpgart interface v0.103
>> [ 1.823870] [drm] Initialized drm 1.1.0 20060810
>> [ 1.832523] brd: module loaded
>> [ 1.837698] loop: module loaded
>> [ 1.841684] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>> [ 1.849958] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
>> [ 1.858330] scsi0 : ahci
>> [ 1.861210] scsi1 : ahci
>> [ 1.864056] scsi2 : ahci
>> [ 1.866914] scsi3 : ahci
>> [ 1.869769] scsi4 : ahci
>> [ 1.872626] scsi5 : ahci
>> [ 1.875419] ata1: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304500 irq 19
>> [ 1.882915] ata2: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304580 irq 19
>> [ 1.890413] ata3: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304600 irq 19
>> [ 1.897910] ata4: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304680 irq 19
>> [ 1.905407] ata5: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304700 irq 19
>> [ 1.912904] ata6: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304780 irq 19
>> [ 1.921786] scsi6 : ata_piix
>> [ 1.924968] scsi7 : ata_piix
>> [ 1.928098] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
>> [ 1.935120] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
>> [ 1.942775] tg3.c:v3.130 (February 14, 2013)
>> [ 1.972566] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:ea:3c:7d
>> [ 1.982920] tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>> [ 1.992757] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>> [ 2.000682] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>> [ 2.007587] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>> [ 2.013742] e100: Copyright(c) 1999-2006 Intel Corporation
>> [ 2.019389] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>> [ 2.026500] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [ 2.032406] sky2: driver version 1.30
>> [ 2.036725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.043325] ehci-pci: EHCI PCI platform driver
>> [ 2.047993] ehci-pci 0000:00:1d.7: EHCI Host Controller
>> [ 2.053397] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>> [ 2.060906] ehci-pci 0000:00:1d.7: debug port 1
>> [ 2.069457] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3304000
>> [ 2.081017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [ 2.086870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 2.093721] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.101040] usb usb1: Product: EHCI Host Controller
>> [ 2.105982] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
>> [ 2.111790] usb usb1: SerialNumber: 0000:00:1d.7
>> [ 2.116724] hub 1-0:1.0: USB hub found
>> [ 2.120545] hub 1-0:1.0: 8 ports detected
>> [ 2.124828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 2.131174] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 2.137738] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ 2.143141] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>> [ 2.150640] uhci_hcd 0000:00:1d.0: detected 2 ports
>> [ 2.155615] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
>> [ 2.161468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.168319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.175642] usb usb2: Product: UHCI Host Controller
>> [ 2.180585] usb usb2: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.186394] usb usb2: SerialNumber: 0000:00:1d.0
>> [ 2.191310] hub 2-0:1.0: USB hub found
>> [ 2.195139] hub 2-0:1.0: 2 ports detected
>> [ 2.199413] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ 2.204827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>> [ 2.212335] uhci_hcd 0000:00:1d.1: detected 2 ports
>> [ 2.217305] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
>> [ 2.223167] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.225037] ata5: SATA link down (SStatus 0 SControl 300)
>> [ 2.225064] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.225087] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 2.225114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.225133] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.225154] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.266626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.273950] usb usb3: Product: UHCI Host Controller
>> [ 2.278891] usb usb3: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.284700] usb usb3: SerialNumber: 0000:00:1d.1
>> [ 2.289633] hub 3-0:1.0: USB hub found
>> [ 2.293454] hub 3-0:1.0: 2 ports detected
>> [ 2.297779] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ 2.303174] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>> [ 2.310668] uhci_hcd 0000:00:1d.2: detected 2 ports
>> [ 2.315644] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
>> [ 2.321502] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.328347] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.335661] usb usb4: Product: UHCI Host Controller
>> [ 2.340597] usb usb4: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.346400] usb usb4: SerialNumber: 0000:00:1d.2
>> [ 2.351290] hub 4-0:1.0: USB hub found
>> [ 2.355110] hub 4-0:1.0: 2 ports detected
>> [ 2.359378] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ 2.364753] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>> [ 2.372252] uhci_hcd 0000:00:1d.3: detected 2 ports
>> [ 2.377222] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
>> [ 2.383074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.389922] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.397238] usb usb5: Product: UHCI Host Controller
>> [ 2.402182] usb usb5: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.407990] usb usb5: SerialNumber: 0000:00:1d.3
>> [ 2.412895] hub 5-0:1.0: USB hub found
>> [ 2.417495] hub 5-0:1.0: 2 ports detected
>> [ 2.421795] usbcore: registered new interface driver usblp
>> [ 2.427343] Initializing USB Mass Storage driver...
>> [ 2.432364] usbcore: registered new interface driver usb-storage
>> [ 2.438432] USB Mass Storage support registered.
>> [ 2.443290] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>> [ 2.576017] tsc: Refined TSC clocksource calibration: 2333.415 MHz
>> [ 2.582266] Switching to clocksource tsc
>> [ 2.646010] usb 2-2: new low-speed USB device number 2 using uhci_hcd
>> [ 2.703408] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 2.708661] mousedev: PS/2 mouse device common for all mice
>> [ 2.714692] rtc_cmos 00:03: RTC can wake from S4
>> [ 2.719565] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>> [ 2.725739] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>> [ 2.733627] md: linear personality registered for level -1
>> [ 2.739179] md: raid0 personality registered for level 0
>> [ 2.744548] md: raid1 personality registered for level 1
>> [ 2.749916] md: raid10 personality registered for level 10
>> [ 2.755458] md: raid6 personality registered for level 6
>> [ 2.760824] md: raid5 personality registered for level 5
>> [ 2.766192] md: raid4 personality registered for level 4
>> [ 2.771822] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>> [ 2.780505] device-mapper: raid: Loading target version 1.4.2
>> [ 2.786410] device-mapper: cache-policy-mq: version 1.0.0 loaded
>> [ 2.792475] device-mapper: cache cleaner: version 1.0.0 loaded
>> [ 2.798363] cpuidle: using governor ladder
>> [ 2.802517] cpuidle: using governor menu
>> [ 2.806498] EFI Variables Facility v0.08 2004-May-17
>> [ 2.811651] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 2.818589] usbcore: registered new interface driver usbhid
>> [ 2.824220] usbhid: USB HID core driver
>> [ 5.842007] hda-intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
>> [ 6.852006] hda-intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x000f0000
>> [ 7.225015] ata3.00: qc timeout (cmd 0xec)
>> [ 7.229177] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 7.235334] ata4.00: qc timeout (cmd 0xec)
>> [ 7.239496] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 7.245652] ata1.00: qc timeout (cmd 0xec)
>> [ 7.249813] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 7.255970] ata2.00: qc timeout (cmd 0xa1)
>> [ 7.260136] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 7.266300] ata6.00: qc timeout (cmd 0xec)
>> [ 7.270465] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 7.558019] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 7.570023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 7.582019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 7.588277] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 7.594529] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 7.861006] hda-intel 0000:00:1b.0: Codec #0 probe error; disabling it...
>> [ 8.873006] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000
>> [ 8.885125] hda_codec: ALC262: SKU not ready 0x411111f0
>> [ 8.902602] Netfilter messages via NETLINK v0.30.
>> [ 8.907378] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> [ 8.913711] ctnetlink v0.93: registering with nfnetlink.
>> [ 8.919199] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 8.924605] TCP: cubic registered
>> [ 8.927982] Initializing XFRM netlink socket
>> [ 8.932728] NET: Registered protocol family 10
>> [ 8.937542] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 8.943061] sit: IPv6 over IPv4 tunneling driver
>> [ 8.948056] NET: Registered protocol family 17
>> [ 8.952588] Key type dns_resolver registered
>> [ 8.957700] Loading module verification certificates
>> [ 8.963791] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c33cdda5e831cd8c069c7b17dc72268cc6fc0e7'
>> [ 8.973628] registered taskstats version 1
>> [ 8.979508] Key type encrypted registered
>> [ 8.985276] IMA: No TPM chip found, activating TPM-bypass!
>> [ 8.993723] Magic number: 5:775:579
>> [ 8.997497] mem kmem: hash matches
>> [ 9.000970] pci_bus 0000:00: hash matches
>> [ 9.005070] console [netcon0] enabled
>> [ 9.008792] netconsole: network logging started
>> [ 9.098143] ALSA device list:
>> [ 9.101179] #0: HDA Intel at 0xf3300000 irq 65
>> [ 17.564011] ata4.00: qc timeout (cmd 0xec)
>> [ 17.568179] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.574339] ata4: limiting SATA link speed to 1.5 Gbps
>> [ 17.579549] ata1.00: qc timeout (cmd 0xec)
>> [ 17.583716] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.589864] ata1: limiting SATA link speed to 1.5 Gbps
>> [ 17.595070] ata2.00: qc timeout (cmd 0xa1)
>> [ 17.599231] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.605379] ata2: limiting SATA link speed to 1.5 Gbps
>> [ 17.610593] ata6.00: qc timeout (cmd 0xec)
>> [ 17.614760] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.620908] ata6: limiting SATA link speed to 1.5 Gbps
>> [ 17.626120] ata3.00: qc timeout (cmd 0xec)
>> [ 17.630280] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 17.636427] ata3: limiting SATA link speed to 1.5 Gbps
>> [ 17.913016] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.919279] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.931019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.943016] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 17.949275] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 47.919011] ata4.00: qc timeout (cmd 0xec)
>> [ 47.923177] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 47.929338] ata1.00: qc timeout (cmd 0xec)
>> [ 47.933503] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 47.939658] ata2.00: qc timeout (cmd 0xa1)
>> [ 47.943824] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 47.949980] ata6.00: qc timeout (cmd 0xec)
>> [ 47.954159] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 47.960318] ata3.00: qc timeout (cmd 0xec)
>> [ 47.964483] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> [ 48.242017] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 48.254021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 48.266018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 48.272272] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 48.278529] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>> [ 48.286162] Freeing unused kernel memory: 1160k freed
>> [ 48.291702] Write protecting the kernel read-only data: 14336k
>> [ 48.302132] Freeing unused kernel memory: 1456k freed
>> [ 48.309312] Freeing unused kernel memory: 504k freed
>> [ 48.345557] dracut: dracut-009-12.fc15
>> [ 48.360229] udev[1113]: starting version 167
>> [ 48.438175] dracut: Starting plymouth daemon
>> [ 48.468363] Floppy drive(s): fd0 is 1.44M
>> [ 51.488031] floppy0: no floppy controllers found
>>
>>
>> First kernel boot logs
>> =======================
>>
>> [ 0.000000] Initializing cgroup subsys cpuset
>> [ 0.000000] Initializing cgroup subsys cpu
>> [ 0.000000] Linux version 3.9.0-rc1+ (<edited>) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #168 SMP Fri Mar 8 11:26:01 EST 2013
>> [ 0.000000] Command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 console=ttyS0,115200n8 selinux=0 crashkernel=128M@64M
>> [ 0.000000] e820: BIOS-provided physical RAM map:
>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
>> [ 0.000000] BIOS-e820: [mem 0x0000000000097000-0x000000000009ffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffc283f] usable
>> [ 0.000000] BIOS-e820: [mem 0x00000000bffc2840-0x00000000bfffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
>> [ 0.000000] NX (Execute Disable) protection: active
>> [ 0.000000] SMBIOS 2.5 present.
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> [ 0.000000] e820: last_pfn = 0xbffc2 max_arch_pfn = 0x400000000
>> [ 0.000000] found SMP MP-table at [mem 0x000fe700-0x000fe70f] mapped at [ffff8800000fe700]
>> [ 0.000000] Scanning 1 areas for low memory corruption
>> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>> [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
>> [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
>> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
>> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffc1fff]
>> [ 0.000000] RAMDISK: [mem 0x37b7b000-0x37feffff]
>> [ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 4095MB)
>> [ 0.000000] ACPI: RSDP 00000000000e9810 00024 (v02 HPQOEM)
>> [ 0.000000] ACPI: XSDT 00000000bffc52ec 0006C (v01 HPQOEM SLIC-WKS 20070918 00000000)
>> [ 0.000000] ACPI: FACP 00000000bffc5494 000F4 (v03 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI BIOS Bug: Error: 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20130117/tbfadt-462)
>> [ 0.000000] ACPI: DSDT 00000000bffc5a6e 02697 (v01 HPQOEM DSDT 00000001 MSFT 0100000E)
>> [ 0.000000] ACPI: FACS 00000000bffc5200 00040
>> [ 0.000000] ACPI: SSDT 00000000bffc8105 06A92 (v01 HPQOEM PROJECT 00000001 MSFT 0100000E)
>> [ 0.000000] ACPI: APIC 00000000bffc5588 000C8 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: ASF! 00000000bffc5650 0006A (v32 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: MCFG 00000000bffc5852 0003C (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: SLIC 00000000bffc588e 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
>> [ 0.000000] ACPI: HPET 00000000bffc5a04 00038 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: TCPA 00000000bffc5a3c 00032 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] ACPI: DMAR 00000000bffc56ba 00108 (v01 HPQOEM SEABURG 00000001 00000000)
>> [ 0.000000] No NUMA configuration found
>> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
>> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
>> [ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff]
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
>> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
>> [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
>> [ 0.000000] Movable zone start for each node
>> [ 0.000000] Early memory node ranges
>> [ 0.000000] node 0: [mem 0x00001000-0x00096fff]
>> [ 0.000000] node 0: [mem 0x00100000-0xbffc1fff]
>> [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
>> [ 0.000000] ACPI: PM-Timer IO Port: 0xf808
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
>> [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>> [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>> [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>> [ 0.000000] PM: Registered nosave memory: 00000000bffc2000 - 00000000bffc3000
>> [ 0.000000] PM: Registered nosave memory: 00000000bffc3000 - 00000000c0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>> [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
>> [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80000 r8192 d22400 u262144
>> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032002
>> [ 0.000000] Policy zone: Normal
>> [ 0.000000] Kernel command line: ro root=UUID=90e92cac-8f9b-464d-9e00-11491cc4bf8e rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us console=tty0 console=ttyS0,115200n8 console=ttyS0,115200n8 selinux=0 crashkernel=128M@64M
>> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>> [ 0.000000] __ex_table already sorted, skipping sort
>> [ 0.000000] Checking aperture...
>> [ 0.000000] No AGP bridge found
>> [ 0.000000] Memory: 3907908k/5242880k available (8771k kernel code, 1049248k absent, 285724k reserved, 6390k data, 1160k init)
>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>> [ 0.000000] Hierarchical RCU implementation.
>> [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>> [ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
>> [ 0.000000] Console: colour VGA+ 80x25
>> [ 0.000000] console [tty0] enabled
>> [ 0.000000] console [ttyS0] enabled
>> [ 0.000000] tsc: Fast TSC calibration using PIT
>> [ 0.000000] tsc: Detected 2333.444 MHz processor
>> [ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.88 BogoMIPS (lpj=2333444)
>> [ 0.004003] pid_max: default: 32768 minimum: 301
>> [ 0.005037] Security Framework initialized
>> [ 0.006007] SELinux: Disabled at boot.
>> [ 0.007306] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>> [ 0.010580] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> [ 0.012523] Mount-cache hash table entries: 256
>> [ 0.013272] Initializing cgroup subsys cpuacct
>> [ 0.014004] Initializing cgroup subsys freezer
>> [ 0.015003] Initializing cgroup subsys blkio
>> [ 0.016041] CPU: Physical Processor ID: 0
>> [ 0.017002] CPU: Processor Core ID: 0
>> [ 0.018003] mce: CPU supports 6 MCE banks
>> [ 0.019009] CPU0: Thermal monitoring enabled (TM2)
>> [ 0.020008] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>> [ 0.020008] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>> [ 0.020008] tlb_flushall_shift: -1
>> [ 0.021106] Freeing SMP alternatives: 28k freed
>> [ 0.022017] ACPI: Core revision 20130117
>> [ 0.025989] ACPI: All ACPI Tables successfully acquired
>> [ 0.028007] ftrace: allocating 30474 entries in 120 pages
>> [ 0.037562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.048659] smpboot: CPU0: Genuine Intel(R) CPU @ 2.33GHz (fam: 06, model: 17, stepping: 04)
>> [ 0.053000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>> [ 0.057002] ... version: 2
>> [ 0.058001] ... bit width: 40
>> [ 0.059001] ... generic registers: 2
>> [ 0.060001] ... value mask: 000000ffffffffff
>> [ 0.061001] ... max period: 000000007fffffff
>> [ 0.062001] ... fixed-purpose events: 3
>> [ 0.063001] ... event mask: 0000000700000003
>> [ 0.065120] smpboot: Booting Node 0, Processors #1 #2 #3
>> [ 0.104014] Brought up 4 CPUs
>> [ 0.105002] smpboot: Total of 4 processors activated (18667.55 BogoMIPS)
>> [ 0.108341] EVM: security.selinux
>> [ 0.109008] EVM: security.ima
>> [ 0.110003] EVM: security.capability
>> [ 0.111316] xor: measuring software checksum speed
>> [ 0.122002] prefetch64-sse: 10028.000 MB/sec
>> [ 0.133002] generic_sse: 8864.000 MB/sec
>> [ 0.134001] xor: using function: prefetch64-sse (10028.000 MB/sec)
>> [ 0.135021] RTC time: 12:05:42, date: 03/08/13
>> [ 0.136061] NET: Registered protocol family 16
>> [ 0.138111] ACPI: bus type PCI registered
>> [ 0.139031] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ 0.140007] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ 0.157009] PCI: Using configuration type 1 for base access
>> [ 0.174040] bio: create slab<bio-0> at 0
>> [ 0.194294] raid6: sse2x1 3265 MB/s
>> [ 0.214301] raid6: sse2x2 5906 MB/s
>> [ 0.234300] raid6: sse2x4 6492 MB/s
>> [ 0.238002] raid6: using algorithm sse2x4 (6492 MB/s)
>> [ 0.243002] raid6: using ssse3x2 recovery algorithm
>> [ 0.248018] ACPI: Added _OSI(Module Device)
>> [ 0.253003] ACPI: Added _OSI(Processor Device)
>> [ 0.257002] ACPI: Added _OSI(3.0 _SCP Extensions)
>> [ 0.262002] ACPI: Added _OSI(Processor Aggregator Device)
>> [ 0.280016] ACPI: SSDT 00000000bffd07c1 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
>> [ 0.288577] ACPI: Dynamic OEM Table Load:
>> [ 0.293254] ACPI: SSDT (null) 008C4 (v01 HPQOEM CPU_TM2 00000001 MSFT 0100000E)
>> [ 0.307302] ACPI: Interpreter enabled
>> [ 0.311007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
>> [ 0.321002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
>> [ 0.330010] ACPI: (supports S0 S3 S4 S5)
>> [ 0.334002] ACPI: Using IOAPIC for interrupt routing
>> [ 0.339026] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>> [ 0.365037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ 0.371050] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
>> [ 0.381002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
>> [ 0.393003] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
>> [ 0.401045] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211)
>> [ 0.410002] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013aa61c30), AE_ALREADY_EXISTS (20130117/psparse-537)
>> [ 0.423006] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>> [ 0.431002] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
>> [ 0.439135] PCI host bridge to bus 0000:00
>> [ 0.443005] pci_bus 0000:00: root bus resource [bus 00-ff]
>> [ 0.449003] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
>> [ 0.455002] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffff]
>> [ 0.462144] pci 0000:00:01.0: System wakeup disabled by ACPI
>> [ 0.468096] pci 0000:00:05.0: System wakeup disabled by ACPI
>> [ 0.474098] pci 0000:00:09.0: System wakeup disabled by ACPI
>> [ 0.482195] pci 0000:00:1c.0: System wakeup disabled by ACPI
>> [ 0.488116] pci 0000:00:1d.0: System wakeup disabled by ACPI
>> [ 0.494113] pci 0000:00:1d.1: System wakeup disabled by ACPI
>> [ 0.499116] pci 0000:00:1d.2: System wakeup disabled by ACPI
>> [ 0.505112] pci 0000:00:1d.3: System wakeup disabled by ACPI
>> [ 0.511173] pci 0000:00:1d.7: System wakeup disabled by ACPI
>> [ 0.517091] pci 0000:00:1e.0: System wakeup disabled by ACPI
>> [ 0.524065] pci 0000:00:01.0: PCI bridge to [bus 80]
>> [ 0.529135] pci 0000:60:00.0: System wakeup disabled by ACPI
>> [ 0.537013] pci 0000:00:05.0: PCI bridge to [bus 60]
>> [ 0.553008] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>> [ 0.563972] pci 0000:1e:00.0: System wakeup disabled by ACPI
>> [ 0.574013] pci 0000:1e:01.0: System wakeup disabled by ACPI
>> [ 0.581138] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>> [ 0.589039] pci 0000:1e:00.0: PCI bridge to [bus 20]
>> [ 0.600285] pci 0000:40:00.0: System wakeup disabled by ACPI
>> [ 0.606287] pci 0000:1e:01.0: PCI bridge to [bus 40]
>> [ 0.615184] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
>> [ 0.622252] pci 0000:0e:00.0: System wakeup disabled by ACPI
>> [ 0.630015] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>> [ 0.635048] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>> [ 0.642032] ACPI _OSC control for PCIe not granted, disabling ASPM
>> [ 0.648323] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
>> [ 0.655740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>> [ 0.663307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
>> [ 0.670436] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
>> [ 0.678054] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>> [ 0.687307] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
>> [ 0.694038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
>> [ 0.701306] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>> [ 0.711086] ACPI: No dock devices found.
>> [ 0.715030] vgaarb: device added: PCI:0000:60:00.0,decodes=io+mem,owns=io+mem,locks=none
>> [ 0.723006] vgaarb: loaded
>> [ 0.726002] vgaarb: bridge control possible 0000:60:00.0
>> [ 0.731071] SCSI subsystem initialized
>> [ 0.735004] ACPI: bus type ATA registered
>> [ 0.739034] ACPI: bus type USB registered
>> [ 0.744031] usbcore: registered new interface driver usbfs
>> [ 0.749022] usbcore: registered new interface driver hub
>> [ 0.755017] usbcore: registered new device driver usb
>> [ 0.760031] pps_core: LinuxPPS API ver. 1 registered
>> [ 0.765002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti<giometti@linux.it>
>> [ 0.774017] PTP clock support registered
>> [ 0.779019] Advanced Linux Sound Architecture Driver Initialized.
>> [ 0.785003] PCI: Using ACPI for IRQ routing
>> [ 0.837065] cfg80211: Calling CRDA to update world regulatory domain
>> [ 0.838144] NetLabel: Initializing
>> [ 0.838146] NetLabel: domain hash size = 128
>> [ 0.838146] NetLabel: protocols = UNLABELED CIPSOv4
>> [ 0.838199] NetLabel: unlabeled traffic allowed by default
>> [ 0.838233] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>> [ 0.838233] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> [ 0.838233] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>> [ 0.880062] Switching to clocksource hpet
>> [ 0.891484] pnp: PnP ACPI init
>> [ 0.894615] ACPI: bus type PNP registered
>> [ 0.900401] system 00:0b: [io 0x04d0-0x04d1] has been reserved
>> [ 0.906523] system 00:0c: [io 0x0400-0x041f] has been reserved
>> [ 0.912506] system 00:0c: [io 0x0420-0x043f] has been reserved
>> [ 0.918486] system 00:0c: [io 0x0440-0x045f] has been reserved
>> [ 0.924466] system 00:0c: [io 0x0460-0x047f] has been reserved
>> [ 0.930444] system 00:0c: [io 0x0480-0x048f] has been reserved
>> [ 0.936424] system 00:0c: [io 0x0490-0x049f] has been reserved
>> [ 0.942404] system 00:0c: [io 0xf800-0xf81f] has been reserved
>> [ 0.948383] system 00:0c: [io 0xf820-0xf83f] has been reserved
>> [ 0.954361] system 00:0c: [io 0xf840-0xf85f] has been reserved
>> [ 0.960341] system 00:0c: [io 0xf860-0xf87f] has been reserved
>> [ 0.966321] system 00:0c: [io 0xfa00-0xfa3f] has been reserved
>> [ 0.972301] system 00:0c: [io 0xfc00-0xfc7f] has been reserved
>> [ 0.978282] system 00:0c: [io 0xfc80-0xfcff] has been reserved
>> [ 0.984259] system 00:0c: [io 0xfe00-0xfe7f] has been reserved
>> [ 0.990239] system 00:0c: [io 0xfe80-0xfeff] has been reserved
>> [ 0.996323] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
>> [ 1.002996] system 00:0d: [mem 0xffe00000-0xffffffff] has been reserved
>> [ 1.009670] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
>> [ 1.016343] system 00:0d: [mem 0xfe700000-0xfe7003ff] has been reserved
>> [ 1.023014] system 00:0d: [mem 0xfe600000-0xfe6fffff] has been reserved
>> [ 1.029687] system 00:0d: [mem 0xfe000000-0xfe01ffff] has been reserved
>> [ 1.036636] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
>> [ 1.043657] system 00:0e: [mem 0x000c0000-0x000e7fff] could not be reserved
>> [ 1.050677] system 00:0e: [mem 0x000e8000-0x000effff] could not be reserved
>> [ 1.057695] system 00:0e: [mem 0x000f0000-0x000fffff] could not be reserved
>> [ 1.064714] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
>> [ 1.071733] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
>> [ 1.078538] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
>> [ 1.085235] pnp: PnP ACPI: found 16 devices
>> [ 1.089480] ACPI: bus type PNP unregistered
>> [ 1.105073] pci 0000:00:09.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
>> [ 1.112477] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3500000-0xf36fffff 64bit pref]
>> [ 1.120399] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
>> [ 1.126638] pci 0000:00:01.0: PCI bridge to [bus 80]
>> [ 1.131673] pci 0000:60:00.0: BAR 6: can't assign mem pref (size 0x20000)
>> [ 1.138520] pci 0000:00:05.0: PCI bridge to [bus 60]
>> [ 1.143546] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
>> [ 1.149701] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf2ffffff]
>> [ 1.156548] pci 0000:00:05.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
>> [ 1.164388] pci 0000:10:00.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
>> [ 1.171790] pci 0000:1e:01.0: BAR 15: assigned [mem 0xf3400000-0xf34fffff pref]
>> [ 1.179201] pci 0000:1e:00.0: PCI bridge to [bus 20]
>> [ 1.184599] pci 0000:40:00.0: BAR 6: assigned [mem 0xf3400000-0xf347ffff pref]
>> [ 1.191916] pci 0000:1e:01.0: PCI bridge to [bus 40]
>> [ 1.196942] pci 0000:1e:01.0: bridge window [io 0x2000-0x2fff]
>> [ 1.203188] pci 0000:1e:01.0: bridge window [mem 0xf3100000-0xf31fffff]
>> [ 1.210080] pci 0000:1e:01.0: bridge window [mem 0xf3400000-0xf34fffff pref]
>> [ 1.217538] pci 0000:10:00.0: PCI bridge to [bus 1e-40]
>> [ 1.222825] pci 0000:10:00.0: bridge window [io 0x2000-0x2fff]
>> [ 1.229068] pci 0000:10:00.0: bridge window [mem 0xf3100000-0xf31fffff]
>> [ 1.235960] pci 0000:10:00.0: bridge window [mem 0xf3400000-0xf34fffff pref]
>> [ 1.243414] pci 0000:10:00.3: PCI bridge to [bus 11-1d]
>> [ 1.249071] pci 0000:00:09.0: PCI bridge to [bus 10-40]
>> [ 1.254357] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
>> [ 1.260512] pci 0000:00:09.0: bridge window [mem 0xf3100000-0xf32fffff]
>> [ 1.267358] pci 0000:00:09.0: bridge window [mem 0xf3400000-0xf34fffff pref]
>> [ 1.275456] pci 0000:00:1c.0: PCI bridge to [bus 0e]
>> [ 1.280481] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
>> [ 1.286635] pci 0000:00:1c.0: bridge window [mem 0xf3000000-0xf30fffff]
>> [ 1.293480] pci 0000:00:1c.0: bridge window [mem 0xf3500000-0xf36fffff 64bit pref]
>> [ 1.301319] pci 0000:00:1e.0: PCI bridge to [bus 01]
>> [ 1.307684] NET: Registered protocol family 2
>> [ 1.312343] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>> [ 1.319981] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
>> [ 1.327193] TCP: Hash tables configured (established 32768 bind 32768)
>> [ 1.333823] TCP: reno registered
>> [ 1.337140] UDP hash table entries: 2048 (order: 5, 196608 bytes)
>> [ 1.343397] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
>> [ 1.350165] NET: Registered protocol family 1
>> [ 1.354675] RPC: Registered named UNIX socket transport module.
>> [ 1.360658] RPC: Registered udp transport module.
>> [ 1.365424] RPC: Registered tcp transport module.
>> [ 1.370198] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [ 1.378249] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
>> [ 1.384770] Trying to unpack rootfs image as initramfs...
>> [ 1.488303] Freeing initrd memory: 4564k freed
>> [ 1.494472] dmar: Host address width 36
>> [ 1.498377] dmar: DRHD base: 0x000000fe710000 flags: 0x0
>> [ 1.503771] dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.511610] dmar: DRHD base: 0x000000fe714000 flags: 0x0
>> [ 1.516989] dmar: IOMMU 1: reg_base_addr fe714000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.524825] dmar: DRHD base: 0x000000fe719000 flags: 0x0
>> [ 1.530203] dmar: IOMMU 2: reg_base_addr fe719000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.538041] dmar: DRHD base: 0x000000fe718000 flags: 0x1
>> [ 1.543416] dmar: IOMMU 3: reg_base_addr fe718000 ver 1:0 cap 900800c2f0462 ecap e01
>> [ 1.551253] dmar: RMRR base: 0x000000bffd3000 end: 0x000000bffd3fff
>> [ 1.557581] dmar: RMRR base: 0x000000bffd4000 end: 0x000000bffd4fff
>> [ 1.563906] dmar: RMRR base: 0x000000bffd5000 end: 0x000000bffd5fff
>> [ 1.570239] dmar: RMRR base: 0x000000bffd6000 end: 0x000000bffd6fff
>> [ 1.576573] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>> [ 1.583073] software IO TLB [mem 0xbbfc2000-0xbffc2000] (64MB) mapped at [ffff8800bbfc2000-ffff8800bffc1fff]
>> [ 1.594127] microcode: CPU0 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.600197] microcode: CPU1 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.606273] microcode: CPU2 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.612346] microcode: CPU3 sig=0x10674, pf=0x40, revision=0x404
>> [ 1.618480] microcode: Microcode Update Driver: v2.00<tigran@aivazian.fsnet.co.uk>, Peter Oruba
>> [ 1.627356] Scanning for low memory corruption every 60 seconds
>> [ 1.633766] Initialise module verification
>> [ 1.637995] audit: initializing netlink socket (disabled)
>> [ 1.643474] type=2000 audit(1362744342.642:1): initialized
>> [ 1.685785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> [ 1.697995] VFS: Disk quotas dquot_6.5.2
>> [ 1.702102] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> [ 1.710463] NFS: Registering the id_resolver key type
>> [ 1.715587] Key type id_resolver registered
>> [ 1.719834] Key type id_legacy registered
>> [ 1.723987] msgmni has been set to 7641
>> [ 1.728562] Key type asymmetric registered
>> [ 1.732724] Asymmetric key parser 'x509' registered
>> [ 1.737815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>> [ 1.745346] io scheduler noop registered
>> [ 1.749332] io scheduler deadline registered
>> [ 1.753748] io scheduler cfq registered (default)
>> [ 1.762984] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ 1.768949] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [ 1.777396] ACPI: Power Button [PBTN]
>> [ 1.781217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>> [ 1.788708] ACPI: Power Button [PWRF]
>> [ 1.792738] ACPI: Requesting acpi_cpufreq
>> [ 1.799941] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ 1.826858] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> [ 1.833459] Non-volatile memory driver v1.3
>> [ 1.837780] Linux agpgart interface v0.103
>> [ 1.842296] [drm] Initialized drm 1.1.0 20060810
>> [ 1.850225] brd: module loaded
>> [ 1.855038] loop: module loaded
>> [ 1.858926] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
>> [ 1.867199] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
>> [ 1.875136] scsi0 : ahci
>> [ 1.877936] scsi1 : ahci
>> [ 1.880722] scsi2 : ahci
>> [ 1.883506] scsi3 : ahci
>> [ 1.886289] scsi4 : ahci
>> [ 1.889088] scsi5 : ahci
>> [ 1.891835] ata1: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304500 irq 19
>> [ 1.899332] ata2: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304580 irq 19
>> [ 1.906822] ata3: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304600 irq 19
>> [ 1.914311] ata4: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304680 irq 19
>> [ 1.921800] ata5: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304700 irq 19
>> [ 1.929289] ata6: SATA max UDMA/133 abar m1024@0xf3304400 port 0xf3304780 irq 19
>> [ 1.937966] scsi6 : ata_piix
>> [ 1.941104] scsi7 : ata_piix
>> [ 1.944181] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
>> [ 1.951211] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
>> [ 1.958744] tg3.c:v3.130 (February 14, 2013)
>> [ 1.974267] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:19:bb:ea:3c:7d
>> [ 1.984617] tg3 0000:0e:00.0 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>> [ 1.994444] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>> [ 2.002365] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>> [ 2.009235] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>> [ 2.015388] e100: Copyright(c) 1999-2006 Intel Corporation
>> [ 2.021010] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>> [ 2.028114] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [ 2.033988] sky2: driver version 1.30
>> [ 2.038174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ 2.044770] ehci-pci: EHCI PCI platform driver
>> [ 2.049448] ehci-pci 0000:00:1d.7: EHCI Host Controller
>> [ 2.054819] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>> [ 2.062320] ehci-pci 0000:00:1d.7: debug port 1
>> [ 2.070870] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf3304000
>> [ 2.082016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [ 2.087886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> [ 2.094733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.102050] usb usb1: Product: EHCI Host Controller
>> [ 2.106991] usb usb1: Manufacturer: Linux 3.9.0-rc1+ ehci_hcd
>> [ 2.112797] usb usb1: SerialNumber: 0000:00:1d.7
>> [ 2.117684] hub 1-0:1.0: USB hub found
>> [ 2.121512] hub 1-0:1.0: 8 ports detected
>> [ 2.125775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ 2.132089] uhci_hcd: USB Universal Host Controller Interface driver
>> [ 2.138665] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ 2.144046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>> [ 2.151541] uhci_hcd 0000:00:1d.0: detected 2 ports
>> [ 2.156505] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
>> [ 2.162353] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.169210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.176525] usb usb2: Product: UHCI Host Controller
>> [ 2.181463] usb usb2: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.187267] usb usb2: SerialNumber: 0000:00:1d.0
>> [ 2.192141] hub 2-0:1.0: USB hub found
>> [ 2.195963] hub 2-0:1.0: 2 ports detected
>> [ 2.200259] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ 2.205638] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>> [ 2.213139] uhci_hcd 0000:00:1d.1: detected 2 ports
>> [ 2.218103] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
>> [ 2.223961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.230811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.238127] usb usb3: Product: UHCI Host Controller
>> [ 2.241037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.241062] ata5: SATA link down (SStatus 0 SControl 300)
>> [ 2.241089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 2.241110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.241141] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.241162] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [ 2.241345] ata4.00: ATA-7: INTEL SSDSA2MH080G1GN, 045C8820, max UDMA/133
>> [ 2.241347] ata4.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31)
>> [ 2.293033] usb usb3: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.293046] ata2.00: ATAPI: HL-DT-STDVD-ROM GDRH10N, D70D, max UDMA/100
>> [ 2.293090] ata4.00: configured for UDMA/133
>> [ 2.293164] ata3.00: ATA-8: WDC SSC-D0064SC-2100, 5.12, max UDMA/133
>> [ 2.293166] ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>> [ 2.323437] ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OAB6A, max UDMA/100
>> [ 2.323439] usb usb3: SerialNumber: 0000:00:1d.1
>> [ 2.326166] hub 3-0:1.0: USB hub found
>> [ 2.326171] hub 3-0:1.0: 2 ports detected
>> [ 2.326392] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ 2.326455] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>> [ 2.326463] uhci_hcd 0000:00:1d.2: detected 2 ports
>> [ 2.326501] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
>> [ 2.326544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.326546] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.326548] usb usb4: Product: UHCI Host Controller
>> [ 2.326550] usb usb4: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.326551] usb usb4: SerialNumber: 0000:00:1d.2
>> [ 2.326698] hub 4-0:1.0: USB hub found
>> [ 2.326702] hub 4-0:1.0: 2 ports detected
>> [ 2.326921] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ 2.326985] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>> [ 2.326993] uhci_hcd 0000:00:1d.3: detected 2 ports
>> [ 2.327040] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
>> [ 2.327085] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 2.327087] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [ 2.327088] usb usb5: Product: UHCI Host Controller
>> [ 2.327090] usb usb5: Manufacturer: Linux 3.9.0-rc1+ uhci_hcd
>> [ 2.327092] usb usb5: SerialNumber: 0000:00:1d.3
>> [ 2.327248] hub 5-0:1.0: USB hub found
>> [ 2.327252] hub 5-0:1.0: 2 ports detected
>> [ 2.327425] usbcore: registered new interface driver usblp
>> [ 2.327426] Initializing USB Mass Storage driver...
>> [ 2.327485] usbcore: registered new interface driver usb-storage
>> [ 2.327485] USB Mass Storage support registered.
>> [ 2.327607] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>> [ 2.494978] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>> [ 2.496040] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 2.496046] serio: i8042 AUX port at 0x60,0x64 irq 12
>> [ 2.496163] mousedev: PS/2 mouse device common for all mice
>> [ 2.496452] rtc_cmos 00:03: RTC can wake from S4
>> [ 2.496633] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>> [ 2.496666] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>> [ 2.496772] md: linear personality registered for level -1
>> [ 2.496773] md: raid0 personality registered for level 0
>> [ 2.496774] md: raid1 personality registered for level 1
>> [ 2.496776] md: raid10 personality registered for level 10
>> [ 2.496776] md: raid6 personality registered for level 6
>> [ 2.496777] md: raid5 personality registered for level 5
>> [ 2.496778] md: raid4 personality registered for level 4
>> [ 2.496997] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>> [ 2.497123] device-mapper: raid: Loading target version 1.4.2
>> [ 2.497200] device-mapper: cache-policy-mq: version 1.0.0 loaded
>> [ 2.497201] device-mapper: cache cleaner: version 1.0.0 loaded
>> [ 2.497206] cpuidle: using governor ladder
>> [ 2.497207] cpuidle: using governor menu
>> [ 2.497208] EFI Variables Facility v0.08 2004-May-17
>> [ 2.497309] hidraw: raw HID events driver (C) Jiri Kosina
>> [ 2.498363] usbcore: registered new interface driver usbhid
>> [ 2.498364] usbhid: USB HID core driver
>> [ 2.596019] tsc: Refined TSC clocksource calibration: 2333.415 MHz
>> [ 2.596023] Switching to clocksource tsc
>> [ 2.638906] ata6.00: ATA-8: WDC WD30EZRS-00J99B0, 80.00A80, max UDMA/133
>> [ 2.645669] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>> [ 2.652890] ata2.00: configured for UDMA/100
>> [ 2.657330] ata3.00: configured for UDMA/133
>> [ 2.661686] ata1.00: configured for UDMA/100
>> [ 2.666096] ata6.00: configured for UDMA/133
>> [ 2.666184] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5
>> [ 2.666514] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>> [ 2.666575] sd 0:0:0:0: [sda] Write Protect is off
>> [ 2.666581] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 2.666605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 2.689011] usb 2-2: new low-speed USB device number 2 using uhci_hcd
>> [ 2.700212] sda: sda1 sda2 sda3
>> [ 2.700648] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 2.724733] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDRH10N D70D PQ: 0 ANSI: 5
>> [ 2.733095] hda_codec: ALC262: SKU not ready 0x411111f0
>> [ 2.741643] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>> [ 2.747887] cdrom: Uniform CD-ROM driver Revision: 3.20
>> [ 2.753422] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> [ 2.758971] scsi 2:0:0:0: Direct-Access ATA WDC SSC-D0064SC- 5.12 PQ: 0 ANSI: 5
>> [ 2.767345] sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
>> [ 2.767427] sd 2:0:0:0: Attached scsi generic sg2 type 0
>> [ 2.767587] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2MH08 045C PQ: 0 ANSI: 5
>> [ 2.767834] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>> [ 2.767880] sd 3:0:0:0: [sdc] Write Protect is off
>> [ 2.767902] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 2.768035] sd 3:0:0:0: Attached scsi generic sg3 type 0
>> [ 2.768542] sdc: unknown partition table
>> [ 2.777131] scsi 5:0:0:0: Direct-Access ATA WDC WD30EZRS-00J 80.0 PQ: 0 ANSI: 5
>> [ 2.777188] sd 3:0:0:0: [sdc] Attached SCSI disk
>> [ 2.777355] sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
>> [ 2.777356] sd 5:0:0:0: [sdd] 4096-byte physical blocks
>> [ 2.777402] sd 5:0:0:0: [sdd] Write Protect is off
>> [ 2.777422] sd 5:0:0:0: Attached scsi generic sg4 type 0
>> [ 2.777426] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 2.865121] sd 2:0:0:0: [sdb] Write Protect is off
>> [ 2.870000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 2.879855] sdb: unknown partition table
>> [ 2.884168] sd 2:0:0:0: [sdb] Attached SCSI disk
>> [ 2.893513] Netfilter messages via NETLINK v0.30.
>> [ 2.898322] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> [ 2.904652] ctnetlink v0.93: registering with nfnetlink.
>> [ 2.910159] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ 2.915563] TCP: cubic registered
>> [ 2.918941] Initializing XFRM netlink socket
>> [ 2.923659] NET: Registered protocol family 10
>> [ 2.928506] ip6_tables: (C) 2000-2006 Netfilter Core Team
>> [ 2.934027] sit: IPv6 over IPv4 tunneling driver
>> [ 2.938992] NET: Registered protocol family 17
>> [ 2.943537] Key type dns_resolver registered
>> [ 2.948543] Loading module verification certificates
>> [ 2.954847] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c33cdda5e831cd8c069c7b17dc72268cc6fc0e7'
>> [ 2.964701] registered taskstats version 1
>> [ 2.970797] Key type encrypted registered
>> [ 2.976627] IMA: No TPM chip found, activating TPM-bypass!
>> [ 2.984354] usb 2-2: New USB device found, idVendor=0624, idProduct=0291
>> [ 2.985121] Magic number: 5:366:76
>> [ 2.994746] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 2.994749] console [netcon0] enabled
>> [ 2.994750] netconsole: network logging started
>> [ 3.010237] usb 2-2: Product: Avocent AVRIQ-USB
>> [ 3.014825] usb 2-2: Manufacturer: Avocent
>> [ 3.053751] input: Avocent Avocent AVRIQ-USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
>> [ 3.063985] hid-generic 0003:0624:0291.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Avocent AVRIQ-USB] on usb-0000:00:1d.0-2/input0
>> [ 3.104851] input: Avocent Avocent AVRIQ-USB as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
>> [ 3.115119] hid-generic 0003:0624:0291.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Avocent AVRIQ-USB] on usb-0000:00:1d.0-2/input1
>> [ 3.162132] ALSA device list:
>> [ 3.165166] #0: HDA Intel at 0xf3300000 irq 65
>> [ 3.201389] sdd: sdd1 sdd2 sdd3
>> [ 3.205088] sd 5:0:0:0: [sdd] Attached SCSI disk
>> [ 3.211246] Freeing unused kernel memory: 1160k freed
>> [ 3.216800] Write protecting the kernel read-only data: 14336k
>> [ 3.227947] Freeing unused kernel memory: 1456k freed
>> [ 3.235391] Freeing unused kernel memory: 504k freed
>> [ 3.272271] dracut: dracut-009-12.fc15
>> [ 3.287701] udev[1173]: starting version 167
>> [ 3.320738] dracut: Starting plymouth daemon
>> [ 3.353350] Floppy drive(s): fd0 is 1.44M
>> [ 3.370234] FDC 0 is a post-1991 82077
>> [ 3.691208] kjournald starting. Commit interval 5 seconds
>> [ 3.691272] EXT3-fs (sda2): mounted filesystem with writeback data mode
>> [ 3.763581] dracut: Checking filesystems
>> [ 3.767598] dracut: fsck -T -t noopts=_netdev -A -a
>> [ 3.957734] dracut: /dev/sda2: Superblock last mount time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set) FIXED. /dev/sda2: clean, 259572/4489216 files, 7067522/17929984 blocks
>> [ 3.977995] dracut: Remounting /dev/disk/by-uuid/90e92cac-8f9b-464d-9e00-11491cc4bf8e with -o ro,
>> [ 4.027270] kjournald starting. Commit interval 5 seconds
>> [ 4.027306] EXT3-fs (sda2): mounted filesystem with writeback data mode
>> [ 4.066278] dracut: Mounted root filesystem /dev/sda2
>> [ 4.207925] dracut: Switching root
>> [ 4.999267] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)



\
 
 \ /
  Last update: 2013-03-13 09:21    [W:0.201 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site