lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc: dw_mmc: move host->data_offset init earlier
Hi James,

There is no reason that can't change the verid check position.
So this patch looks good to me.

Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

On 03/12/2013 07:43 PM, James Hogan wrote:
> host->data_offset is initialised at the end of the probe function
> depending on the VERID register, and is used for PIO operations. Move
> this initialisation earlier, before IRQs or slots are initialised, to be
> sure that PIO won't occur prior to host->data_offset being initialised.
>
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Cc: Seungwon Jeon <tgih.jun@samsung.com>
> Cc: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Chris Ball <cjb@laptop.org>
> ---
> Note, I didn't actually observe this problem occuring, but I think in
> theory it could happen.
>
> drivers/mmc/host/dw_mmc.c | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 1a42c7c..7556456 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2289,6 +2289,18 @@ int dw_mci_probe(struct dw_mci *host)
> mci_writel(host, CLKENA, 0);
> mci_writel(host, CLKSRC, 0);
>
> + /*
> + * In 2.40a spec, Data offset is changed.
> + * Need to check the version-id and set data-offset for DATA register.
> + */
> + host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
> + dev_info(host->dev, "Version ID is %04x\n", host->verid);
> +
> + if (host->verid < DW_MMC_240A)
> + host->data_offset = DATA_OFFSET;
> + else
> + host->data_offset = DATA_240A_OFFSET;
> +
> tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
> host->card_workqueue = alloc_workqueue("dw-mci-card",
> WQ_MEM_RECLAIM | WQ_NON_REENTRANT, 1);
> @@ -2337,18 +2349,6 @@ int dw_mci_probe(struct dw_mci *host)
> goto err_workqueue;
> }
>
> - /*
> - * In 2.40a spec, Data offset is changed.
> - * Need to check the version-id and set data-offset for DATA register.
> - */
> - host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
> - dev_info(host->dev, "Version ID is %04x\n", host->verid);
> -
> - if (host->verid < DW_MMC_240A)
> - host->data_offset = DATA_OFFSET;
> - else
> - host->data_offset = DATA_240A_OFFSET;
> -
> if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
> dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
>
>



\
 
 \ /
  Last update: 2013-03-13 09:01    [W:1.398 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site