lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 3/3] mtd: add 4 Toshiba nand chips for the full-id case
Date
I have 4 Toshiba nand chips which can not be parsed out by the
id data. We can not get the oob size from the id data. So add them
as the full-id nand chips in the first of nand_flash_ids.

The nand_get_flash_type() scans the full id nands firstly.
If a full-id nand matchs, it will not continue to parse other
non-full-id nand types, else it will continue to parse the non-full-id nands.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/nand/nand_ids.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 625bc89..38b8cee 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -10,6 +10,7 @@
*/
#include <linux/module.h>
#include <linux/mtd/nand.h>
+#include <linux/sizes.h>

#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
@@ -22,6 +23,27 @@
* extended chip ID.
*/
struct nand_flash_dev nand_flash_ids[] = {
+ /*
+ * The full-id nands may share the same Device ID with the non-full-id
+ * nands. In order to distinguish the two type nands, we put the
+ * full-id nands in the first of the table. So the nand_get_flash_type()
+ * scans the full id nands firstly. If a full-id nand matchs, it will
+ * not continue to parse other non-full-id nand types, else it will
+ * continue to parse the non-full-id nands.
+ */
+ {"TC58NVG2S0F 4G 3.3V 8-bit",
+ { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
+ SZ_4K, SZ_512, SZ_256K, 0, 224},
+ {"TC58NVG3S0F 8G 3.3V 8-bit",
+ { .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} },
+ SZ_4K, SZ_1K, SZ_256K, 0, 232},
+ {"TC58NVG5D2 32G 3.3V 8-bit",
+ { .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} },
+ SZ_8K, SZ_4K, SZ_1M, 0, 640},
+ {"TC58NVG6D2 64G 3.3V 8-bit",
+ { .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
+ SZ_8K, SZ_8K, SZ_2M, 0, 640},
+
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 512, 4, 0x2000, 0),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 512, 4, 0x2000, 0),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 512, 4, 0x2000, 0),
--
1.7.1



\
 
 \ /
  Last update: 2013-03-14 05:02    [W:0.083 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site