lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)
OK, this is a "me too", on Thinkpad x200s.

[ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186
[ 4.116850] Call Trace:
[ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0
[ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240
[ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230
[ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70
[ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100
[ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150
[ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80
[ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0
[ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d
[ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0
[ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560
[ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630
[ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130
[ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630
[ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0
[ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40
[ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120
[ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90
[ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360
[ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10
[ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0
[ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30
[ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220
[ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70
[ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0
[ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0
[ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280
[ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110
[ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0
[ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130
[ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0
[ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b
[ 4.116943] handlers:
[ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore]
[ 4.116960] Disabling IRQ #16

I don't think I have seen this message on rc1+ (8343bce, to be precise),
but I have definitely seen sluggish system response on that kernel as
well.

Attaching lspci, /proc/interrupts and dmesg.

--
Jiri Kosina
SUSE Labs
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.0-rc2-00188-g6c23cbb (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #186 SMP Wed Mar 13 22:14:20 CET 2013
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01d87000, 0x01d87fff] PGTABLE
[ 0.000000] BRK [0x01d88000, 0x01d88fff] PGTABLE
[ 0.000000] BRK [0x01d89000, 0x01d89fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff]
[ 0.000000] [mem 0x7c200000-0x7c3fffff] page 2M
[ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff]
[ 0.000000] [mem 0x7c000000-0x7c1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff]
[ 0.000000] [mem 0x78000000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x77ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7c400000-0x7c4a0fff]
[ 0.000000] [mem 0x7c400000-0x7c4a0fff] page 4k
[ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c4a7000-0x7c5b6fff]
[ 0.000000] [mem 0x7c4a7000-0x7c5b6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7c60f000-0x7c6c5fff]
[ 0.000000] [mem 0x7c60f000-0x7c6c5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7c9ff000-0x7c9fffff]
[ 0.000000] [mem 0x7c9ff000-0x7c9fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x36b1f000-0x37feffff]
[ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000007c97bdcc 0009C (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: FACP 000000007c97bf00 000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: DSDT 000000007c97c2f4 0D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007c98e000 00040
[ 0.000000] ACPI: SSDT 000000007c97c0b4 00240 (v01 LENOVO TP-6D 00002020 MSFT 03000000)
[ 0.000000] ACPI: ECDT 000000007c989b7d 00052 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: APIC 000000007c989bcf 00078 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: MCFG 000000007c989c47 0003C (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: HPET 000000007c989c83 00038 (v01 LENOVO TP-6D 00002020 LNVO 00000001)
[ 0.000000] ACPI: SLIC 000000007c989dc2 00176 (v01 LENOVO TP-6D 00002020 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007c989f38 00028 (v01 LENOVO TP-6D 00002020 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000007c989f60 000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001)
[ 0.000000] ACPI: SSDT 000000007c98d203 0055F (v01 LENOVO TP-6D 00002020 INTL 20050513)
[ 0.000000] ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000)
[ 0.000000] ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff]
[ 0.000000] NODE_DATA [mem 0x7c6b1000-0x7c6c4fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff]
[ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff]
[ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff]
[ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff]
[ 0.000000] On node 0 totalpages: 509446
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6923 pages used for memmap
[ 0.000000] DMA32 zone: 505449 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000
[ 0.000000] PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000
[ 0.000000] PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000
[ 0.000000] PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000
[ 0.000000] PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000
[ 0.000000] PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000
[ 0.000000] PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000
[ 0.000000] PM: Registered nosave memory: 000000007c6df000 - 000000007c706000
[ 0.000000] PM: Registered nosave memory: 000000007c706000 - 000000007c708000
[ 0.000000] PM: Registered nosave memory: 000000007c708000 - 000000007c90f000
[ 0.000000] PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000
[ 0.000000] PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000
[ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007c200000 s81408 r8192 d20992 u524288
[ 0.000000] pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1972936k/2041856k available (5512k kernel code, 4072k absent, 64848k reserved, 5408k data, 1364k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] kmemleak: Early log buffer exceeded (547), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1861.860 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.72 BogoMIPS (lpj=7447440)
[ 0.004154] pid_max: default: 32768 minimum: 301
[ 0.008178] Security Framework initialized
[ 0.008561] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009850] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010482] Mount-cache hash table entries: 256
[ 0.011234] Initializing cgroup subsys cpuacct
[ 0.011311] Initializing cgroup subsys devices
[ 0.011386] Initializing cgroup subsys freezer
[ 0.011462] Initializing cgroup subsys net_cls
[ 0.011538] Initializing cgroup subsys blkio
[ 0.011613] Initializing cgroup subsys perf_event
[ 0.011792] Disabled fast string operations
[ 0.011872] CPU: Physical Processor ID: 0
[ 0.011947] CPU: Processor Core ID: 0
[ 0.012006] mce: CPU supports 6 MCE banks
[ 0.012089] CPU0: Thermal monitoring enabled (TM2)
[ 0.012171] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012171] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.012171] tlb_flushall_shift: -1
[ 0.012368] Freeing SMP alternatives: 20k freed
[ 0.013362] ACPI: Core revision 20130117
[ 0.028912] ACPI: All ACPI Tables successfully acquired
[ 0.032598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072731] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06)
[ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.076000] ... version: 2
[ 0.076000] ... bit width: 40
[ 0.076000] ... generic registers: 2
[ 0.076000] ... value mask: 000000ffffffffff
[ 0.076000] ... max period: 000000007fffffff
[ 0.076000] ... fixed-purpose events: 3
[ 0.076000] ... event mask: 0000000700000003
[ 0.008000] Disabled fast string operations
[ 0.076000] smpboot: Booting Node 0, Processors #1
[ 0.088030] Brought up 2 CPUs
[ 0.088251] smpboot: Total of 2 processors activated (7447.44 BogoMIPS)
[ 0.092773] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093069] devtmpfs: initialized
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes)
[ 0.098804] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes)
[ 0.098804] regulator-dummy: no parameters
[ 0.098804] RTC time: 21:22:18, date: 03/13/13
[ 0.100100] NET: Registered protocol family 16
[ 0.100609] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100716] ACPI: bus type PCI registered
[ 0.100897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.101007] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.111009] PCI: Using configuration type 1 for base access
[ 0.113590] bio: create slab <bio-0> at 0
[ 0.113590] ACPI: Added _OSI(Module Device)
[ 0.113590] ACPI: Added _OSI(Processor Device)
[ 0.113590] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113590] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117277] ACPI: EC: EC description table is found, configuring boot EC
[ 0.131147] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.142007] ACPI: SSDT 000000007c6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.142900] ACPI: Dynamic OEM Table Load:
[ 0.143058] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.143582] ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.144872] ACPI: Dynamic OEM Table Load:
[ 0.145030] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.145242] ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.145639] ACPI: Dynamic OEM Table Load:
[ 0.145797] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.148176] ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.149058] ACPI: Dynamic OEM Table Load:
[ 0.149216] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.152363] ACPI: Interpreter enabled
[ 0.152445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.152640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.152850] ACPI: (supports S0 S3 S4 S5)
[ 0.152925] ACPI: Using IOAPIC for interrupt routing
[ 0.153065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.184061] ACPI: Power Resource [PUBS] (on)
[ 0.193601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.196183] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.196977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.197771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.198564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.199358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.200157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.200950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.201550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.202635] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.203662] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.203801] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.203990] PCI host bridge to bus 0000:00
[ 0.204005] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.204083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.204161] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.204240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.204319] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.204398] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.204477] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff]
[ 0.204574] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.204769] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.204784] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.204793] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.204801] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.204930] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.204943] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit]
[ 0.205147] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.205167] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit]
[ 0.205226] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.205401] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185
[ 0.205418] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f]
[ 0.205426] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f]
[ 0.205435] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827]
[ 0.205443] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b]
[ 0.205451] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f]
[ 0.205652] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002
[ 0.205668] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837]
[ 0.205677] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff]
[ 0.205944] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.205972] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
[ 0.205985] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff]
[ 0.205998] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.206095] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.206149] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.206320] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.206382] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.206548] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.206722] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.206784] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.206992] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.207054] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.207226] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.207410] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.207439] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff]
[ 0.207560] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.207667] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.207844] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.207868] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit]
[ 0.208046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.208168] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.208347] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.208459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.208521] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.208693] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.208805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.208869] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.209094] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.209204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.209280] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.209456] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.209518] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.209674] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.209846] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.209907] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.210103] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.210165] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.210376] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.210405] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff]
[ 0.210526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.210628] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.210797] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.211039] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.211300] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.211332] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.211344] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.211357] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.211369] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.211382] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.211395] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff]
[ 0.211471] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.211622] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.211647] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit]
[ 0.211679] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.211943] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.212217] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000
[ 0.212286] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit]
[ 0.212526] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.220047] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.220130] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.220250] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.220330] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.220336] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.220345] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.220490] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.220581] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220584] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220587] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220590] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220593] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220596] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode)
[ 0.225009] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.225185] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.225250] Found 1 acpi root devices
[ 0.225398] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.228956] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.229110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229110] vgaarb: loaded
[ 0.229110] vgaarb: bridge control possible 0000:00:02.0
[ 0.229110] SCSI subsystem initialized
[ 0.229110] ACPI: bus type ATA registered
[ 0.229110] libata version 3.00 loaded.
[ 0.229110] PCI: Using ACPI for IRQ routing
[ 0.232836] PCI: pci_cache_line_size set to 64 bytes
[ 0.232922] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.232925] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff]
[ 0.232932] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff]
[ 0.232936] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff]
[ 0.232939] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff]
[ 0.233266] NetLabel: Initializing
[ 0.233340] NetLabel: domain hash size = 128
[ 0.233415] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.233552] NetLabel: unlabeled traffic allowed by default
[ 0.233645] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.233728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.234012] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.236036] Switching to clocksource hpet
[ 0.245684] pnp: PnP ACPI init
[ 0.245779] ACPI: bus type PNP registered
[ 0.267601] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267683] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.267764] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.267843] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.267922] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.268013] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.268093] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.268173] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.268253] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.268333] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.268413] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.268493] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.268573] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved
[ 0.268653] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.268734] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.268815] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.289395] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.289475] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.289556] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.289635] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.289713] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.289792] system 00:01: [io 0x1600-0x1641] has been reserved
[ 0.289870] system 00:01: [io 0x1600-0x161b] has been reserved
[ 0.289950] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.290029] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.290109] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.290188] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.290268] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.290348] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.290428] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290571] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.290599] pnp 00:03: [dma 4]
[ 0.290652] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.290721] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.290803] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.290880] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.290958] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.291036] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.311539] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.312276] pnp: PnP ACPI: found 10 devices
[ 0.312352] ACPI: bus type PNP unregistered
[ 0.322353] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.322359] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.322363] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.322376] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.322380] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.322413] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.322416] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.322419] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.322422] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.322425] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.322431] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff]
[ 0.322512] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.322621] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.322730] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.322809] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.322890] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.322968] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.323050] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff]
[ 0.323132] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.323245] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.323323] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.323404] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.323486] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.323598] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.323675] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.323757] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.323839] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.323951] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.324388] pci 0000:00:1e.0: setting latency timer to 64
[ 0.324394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.324396] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.324399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.324402] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.324404] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.324407] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.324410] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.324413] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 0.324415] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.324418] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.324421] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.324424] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref]
[ 0.324426] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.324429] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.324432] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
[ 0.324435] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 0.324437] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 0.324440] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.324443] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.324445] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.324448] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff]
[ 0.324592] NET: Registered protocol family 2
[ 0.325583] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.325846] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.326103] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.326543] TCP: reno registered
[ 0.326634] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.326757] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.327072] NET: Registered protocol family 1
[ 0.327168] pci 0000:00:02.0: Boot video device
[ 0.327190] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.327691] pci 0000:00:1a.2: power state changed by ACPI to D0
[ 0.328226] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.329188] PCI: CLS 64 bytes, default 64
[ 0.329452] Unpacking initramfs...
[ 0.879385] Freeing initrd memory: 21316k freed
[ 0.891050] Simple Boot Flag at 0x35 set to 0x1
[ 0.891616] Scanning for low memory corruption every 60 seconds
[ 0.892214] audit: initializing netlink socket (disabled)
[ 0.892316] type=2000 audit(1363209738.892:1): initialized
[ 0.925495] bounce pool size: 64 pages
[ 0.925584] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.926354] VFS: Disk quotas dquot_6.5.2
[ 0.926481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.927302] msgmni has been set to 3895
[ 0.928040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.928205] io scheduler noop registered
[ 0.928291] io scheduler deadline registered
[ 0.928406] io scheduler cfq registered (default)
[ 0.929750] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.930004] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.930256] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.930547] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.930631] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.930699] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.930779] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.930860] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.930928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.931012] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.931257] intel_idle: does not run on family 6 model 23
[ 0.931318] GHES: HEST is not enabled!
[ 0.931481] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 0.955377] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A
[ 0.955837] Non-volatile memory driver v1.3
[ 0.955913] Linux agpgart interface v0.103
[ 0.956139] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.956335] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.958785] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.959035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.959357] ahci 0000:00:1f.2: version 3.0
[ 0.959590] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.959791] ahci: SSS flag set, parallel bus scan disabled
[ 0.959895] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.960022] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.960146] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.961168] scsi0 : ahci
[ 0.961468] scsi1 : ahci
[ 0.961708] scsi2 : ahci
[ 0.961949] scsi3 : ahci
[ 0.962131] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43
[ 0.962241] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43
[ 0.962348] ata3: DUMMY
[ 0.962420] ata4: DUMMY
[ 0.962683] libphy: Fixed MDIO Bus: probed
[ 0.962761] PPP generic driver version 2.4.2
[ 0.963025] PPP BSD Compression module registered
[ 0.963102] PPP Deflate Compression module registered
[ 0.963181] PPP MPPE Compression module registered
[ 0.963258] NET: Registered protocol family 24
[ 0.963430] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.974285] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.974368] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.974728] mousedev: PS/2 mouse device common for all mice
[ 0.974959] rtc_cmos 00:06: RTC can wake from S4
[ 0.975302] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.975420] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.975547] cpuidle: using governor ladder
[ 0.975622] cpuidle: using governor menu
[ 0.975697] EFI Variables Facility v0.08 2004-May-17
[ 0.975823] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.976041] TCP: cubic registered
[ 0.976224] NET: Registered protocol family 10
[ 0.977243] PM: Checking hibernation image partition /dev/sda1
[ 0.980750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.280033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.280578] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.280582] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.280690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.281019] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
[ 1.281099] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.281662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.281667] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.281775] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.282104] ata1.00: configured for UDMA/133
[ 1.282448] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.282892] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.283214] sd 0:0:0:0: [sda] Write Protect is off
[ 1.283293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.283352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.284291] sda: sda1 sda2
[ 1.284944] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.444397] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 1.600029] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.777004] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.794398] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
[ 1.798483] PM: Hibernation image partition 8:1 present
[ 1.798486] PM: Looking for hibernation image.
[ 1.798711] PM: Image not found (code -22)
[ 1.798713] PM: Hibernation image not present or could not be loaded.
[ 1.798749] registered taskstats version 1
[ 1.799514] Magic number: 5:10:399
[ 1.801181] Freeing unused kernel memory: 1364k freed
[ 1.801647] Write protecting the kernel read-only data: 10240k
[ 1.803674] Freeing unused kernel memory: 620k freed
[ 1.808877] Freeing unused kernel memory: 1620k freed
[ 1.851024] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.851106] ACPI: Thermal Zone [THM0] (53 C)
[ 1.853562] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.853641] ACPI: Thermal Zone [THM1] (52 C)
[ 1.856461] ata_generic 0000:00:03.2: setting latency timer to 64
[ 1.857117] scsi4 : ata_generic
[ 1.857361] scsi5 : ata_generic
[ 1.857530] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 1.857611] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 1.888021] tsc: Refined TSC clocksource calibration: 1861.999 MHz
[ 1.888102] Switching to clocksource tsc
[ 2.192337] ACPI: Requesting acpi_cpufreq
[ 2.195404] Monitor-Mwait will be used to enter C-1 state
[ 2.195417] Monitor-Mwait will be used to enter C-2 state
[ 2.195426] Monitor-Mwait will be used to enter C-3 state
[ 2.195433] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.195527] ACPI: acpi_idle registered with cpuidle
[ 2.196760] Switching to clocksource hpet
[ 2.252779] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.260440] udevd[99]: starting version 173
[ 2.299501] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.322120] ACPI: bus type USB registered
[ 2.322276] usbcore: registered new interface driver usbfs
[ 2.322384] usbcore: registered new interface driver hub
[ 2.327724] ACPI: Lid Switch [LID]
[ 2.327963] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.330234] ACPI: Sleep Button [SLPB]
[ 2.330437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.330918] ACPI: Power Button [PWRF]
[ 2.346946] [drm] Initialized drm 1.1.0 20060810
[ 2.361651] usbcore: registered new device driver usb
[ 2.413189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.419227] [drm] Memory usable by graphics device = 2048M
[ 2.419316] i915 0000:00:02.0: setting latency timer to 64
[ 2.420937] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.490517] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.490538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.490626] [drm] Driver supports precise vblank timestamp query.
[ 2.490841] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.702183] fbcon: inteldrmfb (fb0) is primary device
[ 3.231763] Console: switching to colour frame buffer device 180x56
[ 3.235328] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.235358] i915 0000:00:02.0: registered panic notifier
[ 3.240880] acpi device:01: registered as cooling_device2
[ 3.241074] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.241221] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.241448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.241714] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.241719] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.241762] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.241896] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.242024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.242062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.242103] usb usb1: Product: UHCI Host Controller
[ 3.242131] usb usb1: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.242170] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.242585] hub 1-0:1.0: USB hub found
[ 3.242619] hub 1-0:1.0: 2 ports detected
[ 3.242945] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.242950] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.242992] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.243121] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.243237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.243276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.243317] usb usb2: Product: UHCI Host Controller
[ 3.243346] usb usb2: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.243385] usb usb2: SerialNumber: 0000:00:1a.1
[ 3.243896] hub 2-0:1.0: USB hub found
[ 3.243928] hub 2-0:1.0: 2 ports detected
[ 3.244876] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.244882] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.244922] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.245048] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 3.245162] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.246688] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.248208] usb usb3: Product: UHCI Host Controller
[ 3.249728] usb usb3: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.251251] usb usb3: SerialNumber: 0000:00:1a.2
[ 3.255188] hub 3-0:1.0: USB hub found
[ 3.256724] hub 3-0:1.0: 2 ports detected
[ 3.258529] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.258534] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.260037] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.261634] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 3.263147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.264541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.266029] usb usb4: Product: UHCI Host Controller
[ 3.267401] usb usb4: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.268835] usb usb4: SerialNumber: 0000:00:1d.0
[ 3.270547] hub 4-0:1.0: USB hub found
[ 3.272045] hub 4-0:1.0: 2 ports detected
[ 3.274004] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.274012] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.275473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.277009] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 3.278557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.280015] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.281433] usb usb5: Product: UHCI Host Controller
[ 3.282738] usb usb5: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.284098] usb usb5: SerialNumber: 0000:00:1d.1
[ 3.285688] hub 5-0:1.0: USB hub found
[ 3.287089] hub 5-0:1.0: 2 ports detected
[ 3.288815] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.288821] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.290235] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.291683] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 3.293123] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.294397] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.295677] usb usb6: Product: UHCI Host Controller
[ 3.296982] usb usb6: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd
[ 3.298277] usb usb6: SerialNumber: 0000:00:1d.2
[ 3.299819] hub 6-0:1.0: USB hub found
[ 3.301200] hub 6-0:1.0: 2 ports detected
[ 3.462805] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 3.462814] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff]
[ 3.462817] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff]
[ 3.462821] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff]
[ 3.462850] PM: Basic memory bitmaps created
[ 3.474989] PM: Basic memory bitmaps freed
[ 3.474997] video LNXVIDEO:00: Restoring backlight state
[ 3.495558] PM: Starting manual resume from disk
[ 3.496953] PM: Hibernation image partition 8:1 present
[ 3.496956] PM: Looking for hibernation image.
[ 3.497187] PM: Image not found (code -22)
[ 3.497189] PM: Hibernation image not present or could not be loaded.
[ 3.545910] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.556055] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 3.567188] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 3.727237] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810
[ 3.728695] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.730235] usb 2-1: Product: Fingerprint Sensor
[ 3.844047] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 4.010237] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 4.011838] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.013326] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 4.014906] usb 2-2: Manufacturer: Lenovo Computer Corp
[ 4.109393] systemd-readahead-replay[388]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186
[ 4.116850] Call Trace:
[ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0
[ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240
[ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230
[ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70
[ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100
[ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150
[ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80
[ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0
[ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d
[ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0
[ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560
[ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630
[ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130
[ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630
[ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0
[ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40
[ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120
[ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90
[ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360
[ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10
[ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0
[ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30
[ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220
[ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70
[ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0
[ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0
[ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280
[ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110
[ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0
[ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130
[ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0
[ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b
[ 4.116943] handlers:
[ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore]
[ 4.116960] Disabling IRQ #16
[ 4.215596] udevd[406]: starting version 173
[ 4.261438] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 4.474227] pps_core: LinuxPPS API ver. 1 registered
[ 4.475247] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.490149] PTP clock support registered
[ 4.496173] ehci-pci: EHCI PCI platform driver
[ 4.497504] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 4.497510] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.498644] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 4.499788] ehci-pci 0000:00:1a.7: debug port 1
[ 4.504820] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 4.504885] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2826c00
[ 4.516548] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.517755] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.518917] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.520113] usb usb7: Product: EHCI Host Controller
[ 4.521238] usb usb7: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd
[ 4.522365] usb usb7: SerialNumber: 0000:00:1a.7
[ 4.528236] hub 7-0:1.0: USB hub found
[ 4.529464] hub 7-0:1.0: 6 ports detected
[ 4.531174] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 4.531180] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.532348] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 4.533549] ehci-pci 0000:00:1d.7: debug port 1
[ 4.538661] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.538735] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2827000
[ 4.560515] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.561757] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.563083] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.564334] usb usb8: Product: EHCI Host Controller
[ 4.565569] usb usb8: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd
[ 4.566902] usb usb8: SerialNumber: 0000:00:1d.7
[ 4.591515] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[ 4.592796] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.607818] mtp-probe[567]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1"
[ 4.610109] hub 8-0:1.0: USB hub found
[ 4.611543] hub 8-0:1.0: 6 ports detected
[ 4.613534] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.616308] usb 2-1: USB disconnect, device number 2
[ 4.616324] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130117/utaddress-251)
[ 4.616325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616331] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
[ 4.616332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616336] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251)
[ 4.616337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.616338] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.628318] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.628457] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.630368] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.640424] wmi: Mapper loaded
[ 4.653195] cfg80211: Calling CRDA to update world regulatory domain
[ 4.701896] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 4.703611] Copyright(c) 2003-2013 Intel Corporation
[ 4.705632] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 4.725360] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
[ 4.740229] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 4.741976] tpm_tis 00:09: Intel iTPM workaround enabled
[ 4.768109] usb 2-2: USB disconnect, device number 3
[ 4.792120] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 4.793905] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.795579] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03
[ 4.797294] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2
[ 4.824561] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 4.843449] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.845290] ACPI: Battery Slot [BAT0] (battery present)
[ 4.848542] thinkpad_acpi: radio switch found; radios are enabled
[ 4.850429] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.852271] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.856794] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 4.858655] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 4.864668] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.866807] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65
[ 4.868727] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.868823] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.872503] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 4.874760] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.881757] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 4.897078] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.897236] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.901050] ACPI: AC Adapter [AC] (on-line)
[ 4.903316] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.908532] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 4.914432] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 4.917701] ALSA sound/pci/hda/hda_auto_parser.c:335 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.917705] ALSA sound/pci/hda/hda_auto_parser.c:339 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.917708] ALSA sound/pci/hda/hda_auto_parser.c:343 hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.917710] ALSA sound/pci/hda/hda_auto_parser.c:344 mono: mono_out=0x0
[ 4.917712] ALSA sound/pci/hda/hda_auto_parser.c:347 dig-out=0x1c/0x0
[ 4.917714] ALSA sound/pci/hda/hda_auto_parser.c:348 inputs:
[ 4.917717] ALSA sound/pci/hda/hda_auto_parser.c:352 Mic=0x18
[ 4.917720] ALSA sound/pci/hda/hda_auto_parser.c:352 Internal Mic=0x1d
[ 4.917723] ALSA sound/pci/hda/hda_auto_parser.c:352 Dock Mic=0x17
[ 4.919349] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 4.921864] ALSA sound/pci/hda/patch_conexant.c:3402 hda_codec: Enable sync_write for stable communication
[ 4.929866] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.932516] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.935484] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.944714] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 4.954054] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.995577] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.997718] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.999837] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 5.001920] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 5.004073] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 5.006064] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 5.008180] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 5.034023] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.043797] Bluetooth: Core ver 2.16
[ 5.045964] NET: Registered protocol family 31
[ 5.047935] Bluetooth: HCI device and connection manager initialized
[ 5.049968] Bluetooth: HCI socket layer initialized
[ 5.050711] ifup-sysctl[680]: ifup-sysctl lo -o hotplug
[ 5.053878] Bluetooth: L2CAP socket layer initialized
[ 5.054021] ifup-sysctl[682]: Applying lo ifsysctl settings
[ 5.057656] Bluetooth: SCO socket layer initialized
[ 5.070490] usbcore: registered new interface driver btusb
[ 5.123448] iTCO_vendor_support: vendor-support=0
[ 5.125321] udev-configure-printer[707]: add /module/lpc_ich
[ 5.126693] udev-configure-printer[707]: Failed to get parent
[ 5.137293] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.139145] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 5.163912] udev-configure-printer[713]: add /bus/pci/drivers/lpc_ich
[ 5.165632] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.174627] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 5.177807] udev-configure-printer[713]: Failed to get parent
[ 5.196277] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.200858] cfg80211: World regulatory domain updated:
[ 5.202655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.204496] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.206268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.208081] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.209869] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.211630] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.270774] ifup-sysctl[769]: ifup-sysctl eth0 -o hotplug
[ 5.284933] ifup-sysctl[774]: Applying eth0 ifsysctl settings
[ 5.298959] ifup-sysctl[781]: ifup-sysctl wlan0 -o hotplug
[ 5.306005] ifup-sysctl[790]: Applying wlan0 ifsysctl settings
[ 5.320782] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k SS
[ 5.349997] ifup[804]: eth0 -o hotplug
[ 5.353701] ifup[806]: wlan0 -o hotplug
[ 5.367297] ifup[819]: Service network not started and mode 'auto' -> skipping
[ 5.372326] ifup[822]: Service network not started and mode 'auto' -> skipping
[ 5.448815] mtp-probe[567]: bus: 2, device: 2 was not an MTP device
[ 5.688096] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[ 5.860182] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810
[ 5.863703] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.867154] usb 2-1: Product: Fingerprint Sensor
[ 6.112176] usb 2-2: new full-speed USB device number 5 using uhci_hcd
[ 6.283209] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 6.286596] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.289957] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 6.293306] usb 2-2: Manufacturer: Lenovo Computer Corp
[ 6.320349] WARNING! power/level is deprecated; use power/control instead
[ 6.328524] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.345180] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.352936] mtp-probe[844]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1"
[ 6.617416] mtp-probe[844]: bus: 2, device: 4 was not an MTP device
[ 6.629292] udevd[472]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory
[ 6.688416] device-mapper: uevent: version 1.0.3
[ 6.690521] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 6.866842] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.917311] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.988914] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.063415] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 7.064009] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 7.073836] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 7.076145] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 7.107750] tun: Universal TUN/TAP device driver, 1.6
[ 7.109121] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 7.953095] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 7.954658] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 8.139040] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 8.140580] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 8.261431] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.542102] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.644203] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.644531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.603442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.603443] Bluetooth: BNEP filters: protocol multicast
[ 11.603461] Bluetooth: BNEP socket layer initialized
[ 11.635882] nscd[2066]: segfault at 1 ip 0000000000000001 sp 00007fff61239748 error 14 in libnss_files-2.16.90.so[7f276d32f000+c000]
[ 11.722837] Bluetooth: RFCOMM TTY layer initialized
[ 11.724558] Bluetooth: RFCOMM socket layer initialized
[ 11.726316] Bluetooth: RFCOMM ver 1.11
[ 12.550291] cgroup: libvirtd (2192) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 12.550488] cgroup: libvirtd (2192) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[ 16.742018] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 16.742405] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 16.865807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.109843] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 17.212291] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 17.212588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.263489] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 17.263893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 17.389326] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.473551] NET: Registered protocol family 17
[ 22.532708] wlan0: authenticate with 00:b0:0c:4e:a5:28
[ 22.536209] wlan0: send auth to 00:b0:0c:4e:a5:28 (try 1/3)
[ 22.538826] wlan0: authenticated
[ 22.538910] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 22.540060] wlan0: associate with 00:b0:0c:4e:a5:28 (try 1/3)
[ 22.542792] wlan0: RX AssocResp from 00:b0:0c:4e:a5:28 (capab=0x411 status=0 aid=4)
[ 22.544327] wlan0: associated
[ 22.544540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.544750] cfg80211: Calling CRDA for country: CN
[ 22.558781] cfg80211: Regulatory domain changed to country: CN
[ 22.558785] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.558788] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.558790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 29.241240] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
CPU0 CPU1
0: 14829 21007 IO-APIC-edge timer
1: 2264 19 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 1197 999 IO-APIC-fasteoi acpi
12: 1945 2186 IO-APIC-edge i8042
16: 50247 49754 IO-APIC-fasteoi uhci_hcd:usb4
17: 1 1 IO-APIC-fasteoi uhci_hcd:usb5
18: 0 0 IO-APIC-fasteoi ata_generic, uhci_hcd:usb6
19: 0 0 IO-APIC-fasteoi ehci_hcd:usb8
20: 0 0 IO-APIC-fasteoi uhci_hcd:usb1
21: 164 146 IO-APIC-fasteoi uhci_hcd:usb2
22: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
23: 1 2 IO-APIC-fasteoi ehci_hcd:usb7, i801_smbus
40: 0 0 PCI-MSI-edge PCIe PME
41: 0 0 PCI-MSI-edge PCIe PME
42: 0 0 PCI-MSI-edge PCIe PME
43: 8130 6874 PCI-MSI-edge ahci
44: 956 47 PCI-MSI-edge i915
45: 236 9 PCI-MSI-edge eth0
46: 18637 630 PCI-MSI-edge iwlwifi
47: 76 76 PCI-MSI-edge snd_hda_intel
NMI: 15 14 Non-maskable interrupts
LOC: 22437 15298 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 15 14 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 4740 3751 Rescheduling interrupts
CAL: 2632 9194 Function call interrupts
TLB: 246 204 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 2 2 Machine check polls
ERR: 0
MIS: 0
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4142
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000

00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Device 20ea
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1828 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1820 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 1810 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: ata_generic
Kernel modules: ata_generic

00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550])
Subsystem: Lenovo Device 20ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1830 [size=8]
Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial

00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b2
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 47
Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4172
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 7f000000-7f1fffff
Prefetchable memory behind bridge: 000000007f200000-000000007f3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f2500000-f25fffff
Prefetchable memory behind bridge: 000000007f400000-000000007f5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41d1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41e1
Capabilities: [90] Subsystem: Lenovo Device 20f3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=04 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Lenovo Device 20f4

00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 20f8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee0100c Data: 4122
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4162
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-34-b0-4c
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

\
 
 \ /
  Last update: 2013-03-13 23:21    [W:0.560 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site