lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/8] usb: phy: nop: Add some parameters to platform data
On 03/13/2013 05:17 PM, Peter Ujfalusi wrote:
> On 03/12/2013 04:20 PM, Roger Quadros wrote:
>> Adding Peter to the loop. I faintly remember him mentioning this issue before
>> for beagle. We really need the deferred probe mechanism or we need to resort
>> to device registering order.
>
> Yes, BeagleBoard is a good example. Long story short: we have external
> dependency and the correct way to handle that is via deferred probe.
>
> As of now we are not ready to kill the legacy support but over time we should
> move as much as we can to DT only mode.
>
>> The first user for needs_vcc flag will be the beagleboard file. I just didn't
>> implement it in this patch [1].
>>
>> On second thoughts, since [1] does work on beagleboard without requiring the
>> needs_vcc flag, I think we can just live without it.
>
> The BeagleBoard works because the bootloader happen to enable the PWM
> generator which is used as a GPIO for the external HUB enable port. As soon as
> the bootloader stops doing this we are going to be in trouble.
>

Wasn't it the LED A out GPO from PMIC that is used to enable the HUB? Just cross
checking so I haven't missed anything.

I will resend the board support patch for beagle implementing
needs_vcc flag for the deferred probe mechanism. Thanks.

cheers,
-roger


\
 
 \ /
  Last update: 2013-03-13 17:21    [W:0.050 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site