lkml.org 
[lkml]   [2013]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 3.9.0-rc1: kexec not working: root disk does not show up
On Wed, Mar 13, 2013 at 11:46:29AM +0400, Konstantin Khlebnikov wrote:

[..]
> >Ok, some more observation.
> >
> >- Problem seems to be in during shutdown path. Because older kernel 3.8
> > can kexec into newer kernel 3.9.rc1 but not vice-a-versa.
> >
> >I did git bisecting and following commit seems to be problem.
> >
> >commit 7897e6022761ace7377f0f784fca059da55f5d71
> >Author: Konstantin Khlebnikov<khlebnikov@openvz.org>
> >Date: Mon Feb 4 15:55:58 2013 +0400
> >
> > PCI: Disable Bus Master unconditionally in pci_device_shutdown()
> >
> > Commit b566a22c23 ("PCI: disable Bus Master on PCI device shutdown")
> > used pci_disable_device(), but that doesn't disable Bus Mastering
> > unconditionally; we allow nested enable/disable calls, and only the
> > last disable call actually does anything.
> >
> > This uses pci_clear_master() to unconditionally clear the Bus Master
> > bit.
> >
> > Matthew Garrett and Alan Cox said (see LKML link below) that clearing
> >Bus
> > Master for all PCI devices may lead to unpredictable consequences:
> >some
> > devices ignores this bit and continue DMA, some of them hang after
> >that or
> > crash the whole system. But we're already trying to clear Bus Master
> >in
> > general because of b566a22c23; this merely deals with the cases where
> > drivers haven't shut down the device correctly.
> >
> > [bhelgaas: changelog]
> > Link: https://lkml.org/lkml/2012/6/6/278
> > Signed-off-by: Konstantin Khlebnikov<khlebnikov@openvz.org>
> > Signed-off-by: Bjorn Helgaas<bhelgaas@google.com>
> > Acked-by: Rafael J. Wysocki<rafael.j.wysocki@intel.com>
> >
> >I reverted above commit and things work again. Just that I get following
> >warning during shutdown.
> >
> >[ 54.252516] ------------[ cut here ]------------
> >[ 54.257199] WARNING: at drivers/pci/pci.c:1397
> >pci_disable_device+0x90/0xa0()
> >[ 54.264387] Hardware name: HP xw6600 Workstation
> >[ 54.269061] Device pci
> >disabling already-disabled device
> >[ 54.274341] Modules linked in: floppy
> >[ 54.278403] Pid: 5272, comm: kexec Not tainted 3.9.0-rc2+ #207
> >[ 54.284289] Call Trace:
> >[ 54.286801] [<ffffffff8133c600>] ? pci_disable_device+0x60/0xa0
> >[ 54.292864] [<ffffffff8103e49f>] warn_slowpath_common+0x7f/0xc0
> >[ 54.298926] [<ffffffff8103e596>] warn_slowpath_fmt+0x46/0x50
> >[ 54.304727] [<ffffffff8133c592>] ? do_pci_disable_device+0x52/0x60
> >[ 54.311050] [<ffffffff8133c630>] pci_disable_device+0x90/0xa0
> >[ 54.316938] [<ffffffff8133e1a4>] pci_device_shutdown+0x44/0x50
> >[ 54.322915] [<ffffffff81462b2d>] device_shutdown+0x1d/0x180
> >[ 54.328631] [<ffffffff81056ba6>] kernel_restart_prepare+0x36/0x50
> >[ 54.334866] [<ffffffff810a16c0>] kernel_kexec+0x50/0x80
> >[ 54.340235] [<ffffffff81056e35>] sys_reboot+0x1f5/0x260
> >[ 54.345604] [<ffffffff811621b9>] ? mntput_no_expire+0x49/0x160
> >[ 54.351578] [<ffffffff811622f6>] ? mntput+0x26/0x40
> >[ 54.356601] [<ffffffff81144539>] ? __fput+0x1a9/0x280
> >[ 54.361798] [<ffffffff8105fae4>] ? task_work_run+0xc4/0xe0
> >[ 54.367428] [<ffffffff810029a5>] ? do_notify_resume+0x75/0x80
> >[ 54.373319] [<ffffffff81882742>] system_call_fastpath+0x16/0x1b
> >[ 54.379382] ---[ end trace ea6ecbf97debf2e2 ]---
> >[ 54.385157] Starting new kernel
> >
> >
> >I am leaving the logs from previous mail intact so that newly CCed
> >people can have a look at it and don't go hunting for old mail in
> >lkml archives.
> >
> >Thanks
> >Vivek
> >
>
> Look like I fixed one bug and added another.
> After ->shutdown() device can be in D3-cold state and config space is unreachable.
>
> try this patch
>
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -385,6 +385,12 @@ static void pci_device_shutdown(struct device *dev)
>
> if (drv && drv->shutdown)
> drv->shutdown(pci_dev);
> +
> + if (pci_dev->current_state == PCI_D3cold) {
> + WARN_ON(pci_dev->msi_enabled || pci_dev->msix_enabled);
> + return;
> + }
> +
> pci_msi_shutdown(pci_dev);
> pci_msix_shutdown(pci_dev);
>
>

Hi,

So this patch is supposed to fix the warning? This warning showed up
only after reverting your patch. So do you agree that your original
patch should be reverted?

I applied this patch and warning is still there (After reverting your
original patch).

I thought we would first address the issue of why kexec is not working
with your patch.

Thanks
Vivek

[ 38.048452] tg3 0000:0e:00.0: System wakeup enabled by ACPI
[ 38.266774] sd 5:0:0:0: [sdd] Synchronizing SCSI cache
[ 38.272116] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 38.277361] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 38.282661] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 38.288467] ------------[ cut here ]------------
[ 38.293151] WARNING: at drivers/pci/pci.c:1397
pci_disable_device+0x90/0xa0()
[ 38.300339] Hardware name: HP xw6600 Workstation
[ 38.305014] Device pci
disabling already-disabled device
[ 38.310294] Modules linked in: floppy
[ 38.314356] Pid: 5258, comm: kexec Not tainted 3.9.0-rc2+ #209
[ 38.320243] Call Trace:
[ 38.322755] [<ffffffff8133c600>] ? pci_disable_device+0x60/0xa0
[ 38.328818] [<ffffffff8103e49f>] warn_slowpath_common+0x7f/0xc0
[ 38.334880] [<ffffffff8103e596>] warn_slowpath_fmt+0x46/0x50
[ 38.340681] [<ffffffff8133c592>] ? do_pci_disable_device+0x52/0x60
[ 38.347003] [<ffffffff8133c630>] pci_disable_device+0x90/0xa0
[ 38.352892] [<ffffffff8133f2d4>] pci_device_shutdown+0x54/0x80
[ 38.358868] [<ffffffff81462b5d>] device_shutdown+0x1d/0x180
[ 38.364584] [<ffffffff81056ba6>] kernel_restart_prepare+0x36/0x50
[ 38.370820] [<ffffffff810a16c0>] kernel_kexec+0x50/0x80
[ 38.376188] [<ffffffff81056e35>] sys_reboot+0x1f5/0x260
[ 38.381558] [<ffffffff811621b9>] ? mntput_no_expire+0x49/0x160
[ 38.387532] [<ffffffff811622f6>] ? mntput+0x26/0x40
[ 38.392555] [<ffffffff81144539>] ? __fput+0x1a9/0x280
[ 38.397753] [<ffffffff8187a0ee>] ? _raw_spin_unlock_irq+0xe/0x30
[ 38.403901] [<ffffffff8105fae4>] ? task_work_run+0xc4/0xe0
[ 38.409531] [<ffffffff810029a5>] ? do_notify_resume+0x75/0x80
[ 38.415420] [<ffffffff81882742>] system_call_fastpath+0x16/0x1b
[ 38.421479] ---[ end trace 61d35d2d55ce5d3d ]---
[ 38.427241] Starting new kernel
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu



\
 
 \ /
  Last update: 2013-03-13 15:44    [W:0.099 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site