lkml.org 
[lkml]   [2013]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] backlight: da903x_bl: switch to using SIMPLE_DEV_PM_OPS
On 03/12/2013 06:48 AM, Jingoo Han wrote:
> This reduces #ifdefs in the code. Also, CONFIG_PM_SLEEP is used
> to avoid warnings of unused functions if CONFIG_PM_SLEEP is not
> defined.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>

I think you can eliminate the suspend/resume functions all together by using
the blacklight subsystems CORE_SUSPENDRESUME feature.

E.g.

diff --git a/drivers/video/backlight/da903x_bl.c
b/drivers/video/backlight/da903x_bl.c
index 8179cef..80ba6b3 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -88,6 +88,9 @@ static int da903x_backlight_update_status(struct
if (bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;

+ if (bl->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
return da903x_backlight_set(bl, brightness);
}

@@ -100,6 +103,7 @@ static int da903x_backlight_get_brightness(struct
static const struct backlight_ops da903x_backlight_ops = {
.update_status = da903x_backlight_update_status,
.get_brightness = da903x_backlight_get_brightness,
+ .options = BL_CORE_SUSPENDRESUME,
};

static int da903x_backlight_probe(struct platform_device *pdev)
@@ -161,35 +165,10 @@ static int da903x_backlight_remove(struct
return 0;
}

-#ifdef CONFIG_PM
-static int da903x_backlight_suspend(struct device *dev)
-{
- struct backlight_device *bl = dev_get_drvdata(dev);
-
- return da903x_backlight_set(bl, 0);
-}
-
-static int da903x_backlight_resume(struct device *dev)
-{
- struct backlight_device *bl = dev_get_drvdata(dev);
-
- backlight_update_status(bl);
- return 0;
-}
-
-static const struct dev_pm_ops da903x_backlight_pm_ops = {
- .suspend = da903x_backlight_suspend,
- .resume = da903x_backlight_resume,
-};
-#endif
-
static struct platform_driver da903x_backlight_driver = {
.driver = {
.name = "da903x-backlight",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
- .pm = &da903x_backlight_pm_ops,
-#endif
},
.probe = da903x_backlight_probe,
.remove = da903x_backlight_remove,

\
 
 \ /
  Last update: 2013-03-12 20:44    [W:0.081 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site