lkml.org 
[lkml]   [2013]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next: manual merge of the akpm tree with the arm-soc tree
On Tue, Mar 12, 2013 at 07:25:09AM +0100, Andrew Lunn wrote:
> On Tue, Mar 12, 2013 at 02:47:14PM +1100, Stephen Rothwell wrote:
> > Hi Andrew,
> >
> > Today's linux-next merge of the akpm tree got a conflict in
> > drivers/rtc/rtc-mv.c between commit 89c58c198b25 ("rtc: rtc-mv: Add
> > support for clk to avoid lockups") from the arm-soc tree and commit "rtc:
> > rtc-mv: use devm_rtc_device_register()" from the akpm tree.
> >
> > I fixed it up (I think - see below) and can carry the fix as necessary
> > (no action is required).
>
> Hi Stephan
>
> Looks O.K. to me.
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>

Same here,

Acked-by: Jason Cooper <jason@lakedaemon.net>

>
> >
> > --
> > Cheers,
> > Stephen Rothwell sfr@canb.auug.org.au
> >
> > diff --cc drivers/rtc/rtc-mv.c
> > index f378e17,1ee8551..0000000
> > --- a/drivers/rtc/rtc-mv.c
> > +++ b/drivers/rtc/rtc-mv.c
> > @@@ -272,16 -262,15 +272,17 @@@ static int __init mv_rtc_probe(struct p
> >
> > if (pdata->irq >= 0) {
> > device_init_wakeup(&pdev->dev, 1);
> > - pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
> > + pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
> > &mv_rtc_alarm_ops,
> > THIS_MODULE);
> > - } else
> > - pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
> > + } else {
> > + pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
> > &mv_rtc_ops, THIS_MODULE);
> > + }
> > - if (IS_ERR(pdata->rtc))
> > - return PTR_ERR(pdata->rtc);
> > + if (IS_ERR(pdata->rtc)) {
> > + ret = PTR_ERR(pdata->rtc);
> > + goto out;
> > + }
> >
> > if (pdata->irq >= 0) {
> > writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
> > @@@ -308,10 -292,6 +309,9 @@@ static int __exit mv_rtc_remove(struct
> > if (pdata->irq >= 0)
> > device_init_wakeup(&pdev->dev, 0);
> >
> > - rtc_device_unregister(pdata->rtc);
> > + if (!IS_ERR(pdata->clk))
> > + clk_disable_unprepare(pdata->clk);
> > +
> > return 0;
> > }
> >
>
>


\
 
 \ /
  Last update: 2013-03-12 13:01    [W:0.052 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site