Messages in this thread | | | Date | Sat, 2 Mar 2013 10:24:24 +0530 | Subject | Re: Boot failure on Origen board using latest kernel | From | Sachin Kamat <> |
| |
Hi Padma,
Here is the short boot log with earlyprintk enabled. This is in the non-dt case.
EXYNOS4210 PMU Initialize EXYNOS: Initializing architecture s3c24xx-pwm s3c24xx-pwm.0: tin at 50000000, tdiv at 50000000, tin=divclk, base 0 bio: create slab <bio-0> at 0 SCSI subsystem initialized Switching to clocksource mct-frc ROMFS MTD (C) 2007 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056 dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 of_dma_controller_register: not enough information provided dma-pl330 dma-pl330.0: unable to register DMA to the generic DT DMA helpers dma-pl330: probe of dma-pl330.0 failed with error -22
On 2 March 2013 09:40, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Hi Padma, > > While trying to boot the latest mainline kernel (Linus tree tip at > commit b0af9cd9) on Exynos4210 based Origen board, it stops at > "Uncompressing Linux... done, booting the kernel." > > Git bisect pointed to the commit 421da89aa ("DMA: PL330: Register the > DMA controller with the generic DMA helpers"). > Reverting this commit helped me boot the board again. > Could you please look into this? > > -- > With warm regards, > Sachin
-- With warm regards, Sachin
| |