lkml.org 
[lkml]   [2013]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [Intel-gfx] [PATCH 3/3] drm/i915: support resume without VT switch v2
On Mon, Feb 04, 2013 at 01:37:22PM +0000, Jesse Barnes wrote:
> Add support for resuming the suspend configuration at resume time to
> avoid slow and ugly VT switches during suspend and resume. Also emit a
> hotplug event at resume time to make sure any potential configuration
> changes (monitors coming and going, dock events) are handled properly.
>
> v2: use new fb flag to indicate we don't need to VT switch
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 28 +++++++++++++++++++++++++---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_display.c | 25 +++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_fb.c | 3 +++
> 4 files changed, 54 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 1172658..7dbaa01 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -483,8 +483,6 @@ static int i915_drm_freeze(struct drm_device *dev)
>
> cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
>
> - intel_modeset_disable(dev);
> -

You can't just drop this without replacement I think, check git blame for
why it's been added.

> drm_irq_uninstall(dev);
> }
>
> @@ -544,6 +542,24 @@ void intel_console_resume(struct work_struct *work)
> console_unlock();
> }
>
> +static void intel_resume_hotplug(struct drm_device *dev)
> +{
> + struct drm_mode_config *mode_config = &dev->mode_config;
> + struct intel_encoder *encoder;
> +
> + mutex_lock(&mode_config->mutex);
> + DRM_DEBUG_KMS("running encoder hotplug functions\n");
> +
> + list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
> + if (encoder->hot_plug)
> + encoder->hot_plug(encoder);
> +
> + mutex_unlock(&mode_config->mutex);
> +
> + /* Just fire off a uevent and let userspace tell us what to do */
> + drm_helper_hpd_irq_event(dev);
> +}

This should imo be in a separate patch, since afaict we don't bother with
this right now. And I guess we should figure out how this should be done
across drm drivers ...

> +
> static int __i915_drm_thaw(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -563,8 +579,14 @@ static int __i915_drm_thaw(struct drm_device *dev)
> mutex_unlock(&dev->struct_mutex);
>
> intel_modeset_init_hw(dev);
> - intel_modeset_setup_hw_state(dev, false);

Since this doesn't add any delays (besides a few register reads), but adds
tons of paranoid checks for our state-handling: Why drop it? Dropping this
also explains why you get away with killing intel_modeset_disable without
swimming in a see of WARN_ONs ;-)

> drm_irq_install(dev);
> +
> + /* Resume the modeset for every activated CRTC */
> + mutex_lock(&dev->mode_config.mutex);
> + intel_resume_force_mode(dev);
> + mutex_unlock(&dev->mode_config.mutex);
> +
> + intel_resume_hotplug(dev);
> }
>
> intel_opregion_init(dev);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 12ab3bd..c8b1896 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1680,6 +1680,7 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val);
> extern void intel_detect_pch(struct drm_device *dev);
> extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
> extern int intel_enable_rc6(const struct drm_device *dev);
> +extern int intel_resume_force_mode(struct drm_device *dev);
>
> extern bool i915_semaphore_is_enabled(struct drm_device *dev);
> int i915_reg_read_ioctl(struct drm_device *dev, void *data,
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index da1ad9c..a127877 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9369,6 +9369,31 @@ void intel_modeset_cleanup(struct drm_device *dev)
> drm_mode_config_cleanup(dev);
> }
>
> +int intel_resume_force_mode(struct drm_device *dev)
> +{
> + struct drm_crtc *crtc;
> + struct drm_encoder *encoder;
> + struct drm_encoder_helper_funcs *encoder_funcs;
> + struct drm_crtc_helper_funcs *crtc_funcs;
> + int ret;
> +
> + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
> +
> + if (!crtc->enabled) {
> + DRM_ERROR("skipping disabled crtc\n");
> + continue;
> + }
> +
> + ret = intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
> + crtc->fb);
> +
> + if (ret == false)
> + DRM_ERROR("failed to set mode on crtc %p\n", crtc);
> + }
> +
> + return 0;
> +}

intel_modeset_setup_hw_state(dev, true); should do exactly this trick, see
the lid notifier in intel_lvds.c. That presumes though that you don't kill
the modeset state, which might require some changes in
intel_modeset_disable.

> +
> /*
> * Return which encoder is currently attached for connector.
> */
> diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
> index 7b30b5c..d4955b5 100644
> --- a/drivers/gpu/drm/i915/intel_fb.c
> +++ b/drivers/gpu/drm/i915/intel_fb.c
> @@ -148,6 +148,9 @@ static int intelfb_create(struct intel_fbdev *ifbdev,
> }
> info->screen_size = size;
>
> + /* This driver doesn't need a VT switch to restore the mode on resume */
> + info->skip_vt_switch = true;
> +
> // memset(info->screen_base, 0, size);

Follow-up patch to kill this // commented-line?

>
> drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

\
 
 \ /
  Last update: 2013-02-06 11:01    [W:0.114 / U:2.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site