lkml.org 
[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 45/93] ath9k_hw: fix calibration issues on chainmask that don't include chain 0
Date
3.5.7.5 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 4a8f199508d79ff8a7d1e22f47b912baaf225336 upstream.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[ herton: adjust context ]
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 ++
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.h | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 9fdd70f..53aeca7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -910,6 +910,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
AR_PHY_CL_TAB_1,
AR_PHY_CL_TAB_2 };

+ ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
+
if (rtt) {
if (!ar9003_hw_rtt_restore(ah, chan))
run_rtt_cal = true;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 11abb97..b490b16 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -532,7 +532,7 @@ static void ar9003_hw_init_bb(struct ath_hw *ah,
ath9k_hw_synth_delay(ah, chan, synthDelay);
}

-static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
+void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
{
switch (rx) {
case 0x5:
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 02f5007..ec2835b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1008,6 +1008,7 @@ int ar9003_paprd_create_curve(struct ath_hw *ah,
int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain);
int ar9003_paprd_init_table(struct ath_hw *ah);
bool ar9003_paprd_is_done(struct ath_hw *ah);
+void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx);

/* Hardware family op attach helpers */
void ar5008_hw_attach_phy_ops(struct ath_hw *ah);
--
1.7.9.5


\
 
 \ /
  Last update: 2013-02-06 00:21    [W:0.250 / U:6.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site